EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 391 (2023) E3S Web Conf., 391 (2023) 01169 References
Open Access
Issue
E3S Web Conf.
Volume 391, 2023
4th International Conference on Design and Manufacturing Aspects for Sustainable Energy (ICMED-ICMPC 2023)
Article Number 01169
Number of page(s) 13
DOI https://doi.org/10.1051/e3sconf/202339101169
Published online 05 June 2023
  1. Sree Sabari, S., et al. 2016. Experimental and Numerical Investigation on Under- water Friction Stir Welding of Armour Grade AA2519-T87 Aluminium Alloy. Defence Technology, vol. 12, no. 4, Elsevier B.V., 2016, pp. 324–333, DOI: 10.1016/j.dt.2016.02.003. [CrossRef] [Google Scholar]
  2. Sabari, S. Sree, et al. 2016. Influences of Tool Traverse Speed on Tensile Properties of Air Cooled and Water Cooled Friction Stir Welded AA2519-T87 Aluminium Alloy Joints. Journal of Materials Processing Technology, vol. 237, Elsevier B.V., 2016, pp. 286–300, DOI: 10.1016/j.jmatprotec.2016.06.015. [CrossRef] [Google Scholar]
  3. Fujii, H.; Cui, L.; Maeda, M.; Nogi, K. 2006. Effect of tool shape on mechanical properties and microstructure of friction stir welded aluminum alloys. Materials Science and Engineering A 2006, 419, 25–31. [CrossRef] [Google Scholar]
  4. Suresha, C. N., et al. 2011. A Study of the Effect of Tool Pin Profiles on Tensile Strength of Welded Joints Produced Using Friction Stir Welding Process. Materials and Manufacturing Processes, vol. 26, no. 9, 2011, pp. 1111–1116, DOI: 10.1080/10426914.2010.532527. [CrossRef] [Google Scholar]
  5. Darras B. and Kishta E. 2013. Submerged friction stir processing of AZ31 magnesium alloy. Mater Design 2013; 47: 133–137. [Google Scholar]
  6. Hofmann D. and Vecchio K. 2005. Submerged friction stir pro- cessing (SFSP): an improved method for creating ultra- fine-grained bulk materials. Mater Sci Eng A 2005; 402: 234–241. [CrossRef] [Google Scholar]
  7. Pedapati, S. R., Paramaguru, D., & Awang, M. (2017). Microhardness and Microstructural Studies on Submerged Friction Stir Welding of 5052 Aluminum Alloy. Volume 2: Advanced manufacturing. DOI: 10.1115/imece2017-71248 [Google Scholar]
  8. Jata, K. V., and S. L. Semiatin. (2000) ‘Recrystallization during Friction Stir Welding of High Strength Aluminium Alloys’. Scripta Materialia, vol. 43, pp. 743–749. [CrossRef] [Google Scholar]
  9. Liu, G.; Murr, L.E.; Niou, C.S.; McClure, J.C.; Vega, F.R. 1997. Microstructural aspects of the friction stir welding of 6061-T6 aluminum. Scripta Materialia, 37, 355. [CrossRef] [Google Scholar]
  10. M. Koilraja, V. Sundareswaranb, S. Vijayanc, S.R. Koteswara Rao d. (2012). Friction stir welding of dissimilar aluminum alloys AA2219 to AA5083 - Optimization of process parameters using Taguchi technique Materials and Design 42 (2012) 1–7 DOI: 10.1016/j.matdes.2012.02.016. [Google Scholar]
  11. Khalkhali, Abolfazl, Morteza Sarmadi, and Ehsan Sarikhani. 2017. Investigation on the Best Process Criteria for Lap Joint Friction Stir Welding of AA1100 Aluminum Alloy via Taguchi Technique and ANOVA, Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 231.2, 329–342. https://doi.org/10.1177/0954408916665651. [CrossRef] [Google Scholar]
  12. Taguchi G. and Konishi S. Orthogonal arrays and linear graphs, tools for quality engineering. MI, USA: American Supplier Institute (ASI), 1987, 72 pp. [Google Scholar]
  13. Taguchi G. 1986. Introduction to quality engineering. New York: Kraus International Publication. [Google Scholar]
  14. Asadi, P., Akbari, M., Givi, M. K. B., & Panahi, M. S. (2016). Optimization of AZ91 friction stir welding parameters using Taguchi method. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 230(1), 291–302. https://doi.org/10.1177/1464420715570987 [CrossRef] [Google Scholar]
  15. Santhanam, Senthil Kumar Velukkudi, Rathinasuriyan Chandran, Lokesh Rathinaraj, and Shankar Ramaiyan. (2015). ‘Multi Response Optimization of Submerged Friction Stir Welding Process Parameters Using TOPSIS Approach’. ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE) 2B-2015: 1–6. [Google Scholar]
  16. S. Kasman. 2019. Identification of the Pin Offset Effect on the Friction Stir Welding (FSW) via Taguchi - Grey Relational Analysis: A Case Study for AA 7075 - AA 6013 Alloys’, Materialwissenschaft Und Werkstofftechnik, 50.11, 1364–1381 https://doi.org/10.1002/mawe.201800118. [CrossRef] [Google Scholar]
  17. L. Salavaravu and L. Dumpala, “Effects of process parameters on mechanical and metallurgical properties of AA5083 weld bead and optimization by using Taguchi based grey relational analysis and ANOVA of submerged friction stir welding.,” J. Eng. Res., 2021, DOI: 10.36909/jer.10001 [Google Scholar]
  18. L. R. Salavaravu and L. Dumpala, “Effects of friction stir welding on corrosion and mechanical properties of AA6063 in sea water,” Proc. Inst. Mech. Eng. Part C J. Mech. Eng. Sci., vol. 236, no. 1, 2022, DOI: 10.1177/0954406221995541. [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.