EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 391 (2023) E3S Web Conf., 391 (2023) 01171 References
Open Access
Issue
E3S Web Conf.
Volume 391, 2023
4th International Conference on Design and Manufacturing Aspects for Sustainable Energy (ICMED-ICMPC 2023)
Article Number 01171
Number of page(s) 11
DOI https://doi.org/10.1051/e3sconf/202339101171
Published online 05 June 2023
  1. Davoodi, M.M., Sapuan, S.M., Ahmad, D., Ali, A., Khalina, A. and Jonoobi, M., 2010. Mechanical properties of hybrid kenaf/glass reinforced epoxy composite for passenger car bumper beam. Materials & Design, 31(10), pp. 4927–4932. [CrossRef] [Google Scholar]
  2. Mohammadi, H., Ahmad, Z., Mazlan, S.A., Faizal Johari, M.A., Siebert, G., Petrů, M. and Rahimian Koloor, S.S., 2023. Lightweight Glass Fiber-Reinforced Polymer Composite for Automotive Bumper Applications: A Review. Polymers, 15(1), p.193. [Google Scholar]
  3. Prabhakaran, S., Chinnarasu, K. and Kumar, M.S., 2012. Design and fabrication of composite bumper for light passenger vehicles. International Journal of Modern Engineering Research, 2(4), pp.2552–2556. [Google Scholar]
  4. Neelima, V., Rao, J.B.B., Viswatej, K. and Tech, M., 2016. Design and Analysis of Bumper Beam with Composite Materials. Int. J. Mag. Eng. Technol. Manag. Res, 3, pp.253–259. [Google Scholar]
  5. Adesina, O.T., Jamiru, T., Sadiku, E.R., Ogunbiyi, O.F. and Beneke, L.W., 2019. Mechanical evaluation of hybrid natural fibre-reinforced polymeric composites for automotive bumper beam: a review. The International Journal of Advanced Manufacturing Technology, 103, pp.1781–1797. [CrossRef] [Google Scholar]
  6. Mohammadi, H., Ahmad, Z., Mazlan, S.A., Faizal Johari, M.A., Siebert, G., Petrů, M. and Rahimian Koloor, S.S., 2023. Lightweight Glass Fiber-Reinforced Polymer Composite for Automotive Bumper Applications: A Review. Polymers, 15(1), p.193. [Google Scholar]
  7. Cheon, S.S. and Choi, J.H., 1995. Development of the composite bumper beam for passenger cars. Composite structures, 32(1-4), pp.491–499. [CrossRef] [Google Scholar]
  8. Olorunnishola, A.A.G. and Adubi, E.G., 2018. A comparative analysis of a blend of natural jute and glass fibers with synthetic glass fibers composites as car bumper materials. IOSR J. Mech. Civ. Eng, 15, pp.67–71. [Google Scholar]
  9. Paramasivam, C. and Venugopal, R., 2022. Design and development of glass/basalt fiber reinforced composite material for automobile applications. Journal of Industrial Textiles, 51(1_suppl), pp.1668S–1681S. [CrossRef] [Google Scholar]
  10. Marzbanrad, J., Alijanpour, M. and Kiasat, M.S., 2009. Design and analysis of an automotive bumper beam in low-speed frontal crashes. Thin-walled structures, 47(8-9), pp.902–911. [CrossRef] [Google Scholar]
  11. Ragupathi, P., Sivaram, N.M., Vignesh, G. and Selvam, M.D., 2018. Enhancement of impact strength of a car bumper using natural fiber composite made of jute. i-Manager's Journal on Mechanical Engineering, 8(3), p.39. [Google Scholar]
  12. International Journal of Advances in Engineering and Management (IJAEM) Volume 3, Issue 8 Aug 2021, pp: 761–773 https://www.ijaem.net. [Google Scholar]
  13. International Journal of Engineering and Management Research Available at: https://www.ijemr.net Volume-4, Issue-4, August-2014, ISSN No.: 2250-0758 Page Number: 98–101. [Google Scholar]
  14. Hosseinzadeh R., Shokrieh M.M., Lessard L.B.. Parametric study of automotive composite bumper beams subjected to low-velocity impacts. Compos Struct 2005;68:419 [CrossRef] [Google Scholar]
  15. World Academy of Science, Engineering and Technology International Journal of Mechanical and Mechatronics Engineering Vol:5, No:4, 2011 [Google Scholar]
  16. Department of Mechanical and Manufacturing Engineering, University Putra Malaysia, 43400 UPM Serdang, Selangor, Malaysia. [Google Scholar]
  17. https://www.researchgate.net/publication/330753890_Enhancement_of_Impact_Strength_of_a_Car_B umper_using_Natural_Fiber_Composite_made_of_Jute [Google Scholar]
  18. https://www.researchgate.net/publication/355372238_Conceptual_design_and_analysis_of_a_car_bumper_using_finite_element_method. [Google Scholar]
  19. https://firstratemold.com/automotive-bumper-design/ [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.