Open Access
Issue |
E3S Web Conf.
Volume 398, 2023
International Conference on Advances in Agrobusiness and Biotechnology Research (ABR 2023)
|
|
---|---|---|
Article Number | 01044 | |
Number of page(s) | 7 | |
DOI | https://doi.org/10.1051/e3sconf/202339801044 | |
Published online | 22 June 2023 |
- L. Carvajal, A. Artigas, A. Monsalve, Y. Vargas, Acoustic birefringence and Poisson’s ratio determined by ultrasound: tools to follow-up deformation by cold rolling and recrystallization, Mat. Res. 20 (2017) 1–7. [Google Scholar]
- M. Hirao, Y.-H. Pao, Dependence of acoustoelastic birefringence on plastic strains in a beam, J. Acous. Soc. Am. 77 (5) (1985) 1659–1664. [CrossRef] [Google Scholar]
- A. Belyaev, V. Polyanskiy, A. Semenov, D. Tretyakov, Y. Yakovlev, Investigation of the correlation between acoustic anisotropy, damage and measures of the stress-strain state, Procedia Struct. Integr. 6 (2017) 201–207. [CrossRef] [Google Scholar]
- S. Gupta, A. Ray, E. Keller, Online fatigue damage monitoring by ultrasonic measurements: A symbolic dynamics approach, Int. J. Fat. 29 (2007) 1100–1114. [CrossRef] [Google Scholar]
- A. Belyaev, A. Lobachev, A. Modestov, A. Pivkov, V. Polyanskii, A. Semenov, D. Tret’yakov, L. Shtukin, Estimating the plastic strain with the use of acoustic anisotropy, Mech. Solids 51 (2016) 606–611. [CrossRef] [Google Scholar]
- V. Mishakin, A. Gonchar, K. Kurashkin, V. Klyushnikov, M. Kachanov, On low-cycle fatigue of austenitic steel. Part I: Changes of Poisson’s ratio and elastic anisotropy, Int. J. Eng. Sci. 168 (2021) 103567. https://doi.org/10.1016/j.ijengsci.2021.103567 [CrossRef] [Google Scholar]
- K. Makowska, L. Piotrowski, Z. Kowalewski, Prediction of the Mechanical Properties of P91 Steel by Means of Magneto-acoustic Emission and Acoustic Birefringence, J. Nondestruct. Eval. 36 (2017) 43. [CrossRef] [Google Scholar]
- K. Kurashkin, A. Gonchar, Variation of acoustic characteristics of an aluminum alloy during plastic deformation at room and subzero temperatures, AIP Conf. Proc. (2018) 030030. [CrossRef] [Google Scholar]
- P. Strážovec, A. Suchánek, P. Šťastniak, J. Harušinec, Detection of residual stress in a railway wheel, Transportation Research Procedia, 40 (2019) 898–905. [CrossRef] [Google Scholar]
- C. He, C. Huang, Y. Liu, Q. Wang, Fatigue damage evaluation of low-alloy steel welded joints in fusion zone and heat affected zone based on frequency response changes in gigacycle fatigue, Int. J. Fatigue 61 (2014) 297–303. [CrossRef] [Google Scholar]
- W. Fricke, Fatigue analysis of welded joints: state of development, Mar Struct. 16 (3) (2003) 185–200. [CrossRef] [Google Scholar]
- M. Toyosada, K. Gotoh, T. Niwa, Fatigue life assessment for welded structures without initial defects: an algorithm for predicting fatigue crack growth from a sound site, Int. J. Fatigue 26 (2004) 993–1002. [CrossRef] [Google Scholar]
- A. Güral, B. Bostan, A. Özdemir, Heat treatment in two phase region and its effect on welding of a low carbon steel, Mater. Design 28 (2007) 897–903. [CrossRef] [Google Scholar]
- F. Dittrich, J. Kaars, B. Masek, S. Jenicek, M.V.-X. Wagner, P. Mayr, HAZ characterization of welded 42SiCr steel treated by quenching and partitioning, J. M. Process. Tech. 268 (2019) 37–46. [CrossRef] [Google Scholar]
- J. Veerababu, S. Goyal, A. Nagesha, Studies on creep-fatigue interaction behavior of Grade 92 steel and its weld joints, Int. J. Fatigue 149 (2021) 106307. [CrossRef] [Google Scholar]
- L. Lan, G. Shao, Morphological evolution of HAZ microstructures in low carbon steel during simulated welding thermal cycle, Micron 131 (2020) 102828. [CrossRef] [PubMed] [Google Scholar]
- A. Gonchar, K. Kurashkin, O. Andreeva, M. Anosov, V. Klyushnikov, Fatigue life prediction of structural steel using acoustic birefringence and characteristics of persistent slip bands, Fatigue Fract. Eng. Mater. Struct. 45 (2022) 101–112. [CrossRef] [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.