Open Access
Issue
E3S Web Conf.
Volume 399, 2023
International Conference on Newer Engineering Concepts and Technology (ICONNECT-2023)
Article Number 03016
Number of page(s) 11
Section Material Science
DOI https://doi.org/10.1051/e3sconf/202339903016
Published online 12 July 2023
  1. P.K. Krishnan, J.V. Christy, R. Arunachalam, A.H.I. Mourad, R. Muraliraja, M. Al-Maharbi, V. Murali, M.M. Chandra, Production of aluminum alloy-based metal matrix composites using scrap aluminum alloy and waste materials: Influence on microstructure and mechanical properties, J. Alloys Compd. 784 (2019). [Google Scholar]
  2. S. Arunkumar, A.S. Kumar, Studies on Egg Shell and SiC Reinforced Hybrid Metal Matrix Composite for Tribological Applications, Silicon 2021. (2021). [Google Scholar]
  3. R. Akash, R. Muraliraja, R. Suthan, V.S. Shaisundaram, Synthesis and testing of aluminium composite using industrial waste as reinforcement, Mater. Today Proc. 37 (2021). [Google Scholar]
  4. B.C. Kandpal, N. Johri, N. Kumar, A. Srivastava, Effect of industrial/ agricultural waste materials as reinforcement on properties of metal matrix composites, Mater. Today Proc. 46 (2021). [Google Scholar]
  5. A.A. Abdulrazaq, S.R. Ahmed, F.M. Mahdi, Agricultural waste and natural dolomite for green production of aluminum composites, Clean. Eng. Technol. 11 (2022). [Google Scholar]
  6. N.D. Chinta, N. Selvaraj, V. Mahesh, Mechanical characterization of aluminium - red mud metal matrix composites, Mater. Today Proc. 5 (2018) 26911–26917. https://doi.org/10.1016/J.MATPR.2018.08.178. [CrossRef] [Google Scholar]
  7. V.S. Aigbodion, Bean pod ash nanoparticles a promising reinforcement for aluminium matrix biocomposites, J. Mater. Res. Technol. 8 (2019). [Google Scholar]
  8. U. Devadiga, S. Kumar Shetty, P. Fernandes, Assessment of carbon nanotubes (CNT) and fly ashes (FA) reinforced Al nanocomposites properties synthesised by powder metallurgy, Mater. Today Proc. 22 (2020). [Google Scholar]
  9. S.K. Tripathy, A.K. Senapati, A review on turning analysis of industrial waste reinforced aluminum metal matrix composite, Mater. Today Proc. 33 (2020). [Google Scholar]
  10. M.G.A. Kumar, S. Seetharamu, J. Nayak, L.N. Satapathy, A Study on Thermal Behavior of Aluminum Cenosphere Powder Metallurgy Composites Sintered in Microwave, Procedia Mater. Sci. 5 (2014). [Google Scholar]
  11. A. Kumar Gummadi, M.K. Gupta, D. Raviteja, A. Mahesh Babu, R. Singh Niranjan, P. Bhai Patel, Investigations on mechanical behavior of processed MMCs of Al6082 and reinforcement particles B4C by powder metallurgy technique, ater. Today Proc. (2023). [Google Scholar]
  12. Y.F. Fuziana, A.R.M. Warikh, M.A. Lajis, M.A. Azam, N.S. Muhammad, Recycling aluminium (Al 6061) chip through powder metallurgy route. 18 (2014). [Google Scholar]
  13. Dhanaraj, R., N. Venkateshwaran, M. Chenthil, M. S. Natarajan, V. Santhanam, and S. Baskar. “Experimental investigation on the mechanical properties of glass fiber with perforated aluminum sheet reinforced epoxy composite.” Materials Today: Proceedings 37 (2021). [Google Scholar]
  14. A. Pattnayak, N. Madhu, A.S. Panda, M.K. Sahoo, K. Mohanta, A Comparative study on mechanical properties of Al-SiO2 composites fabricated using rice husk silica in crystalline and amorphous form as reinforcement, Mater. Today Proc. 5 (2018). [Google Scholar]
  15. S.T. Mavhungu, E.T. Akinlabi, M.A. Onitiri, F.M. Varachia, Aluminum Matrix Composites for Industrial Use: Advances and Trends, Procedia Manuf. 7 (2017). [Google Scholar]
  16. Jacob, S., L. Karikalan, and S. Baskar. “Fabrication and tensile testing of composite hybrid joints.” Materials Today: Proceedings 21 (2020). [Google Scholar]
  17. R. Seetharam, S.K. Subbu, M.J. Davidson, Hot workability and densification behavior of sintered powder metallurgy Al-B4C preforms during upsetting, J. Manuf. Process. 28 (2017). [Google Scholar]
  18. Santhanam, V., R. Dhanaraj, M. Chandrasekaran, N. Venkateshwaran, and S. Baskar. “Experimental investigation on the mechanical properties of woven hybrid fiber reinforced epoxy composite.” Materials Today: Proceedings 37 (2021). [Google Scholar]
  19. Senthilkumar Thangarajan Sivasankaran, Senthil Kumar Shanmugakani, and Rathinavel Subbiah. 3D Printing and Additive Manufacturing. 10, 3 (2023). [Google Scholar]
  20. T. S. Senthilkumar, S. A. Venkatesh, Ranjith Kumar and S. Senthil Kumar. Journal of Chemical and Pharmaceutical Research, 8, 1S (2016). [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.