Open Access
Issue
E3S Web of Conf.
Volume 401, 2023
V International Scientific Conference “Construction Mechanics, Hydraulics and Water Resources Engineering” (CONMECHYDRO - 2023)
Article Number 03021
Number of page(s) 6
Section Road Construction, Building Structures and Materials
DOI https://doi.org/10.1051/e3sconf/202340103021
Published online 11 July 2023
  1. Pirmatov, N. B., and Salimov, D. S. Experimental determination of some parameters of synchronous machines of one-and two-axis excitation in steady state. Electricity, (5), 32-34. (2006). [Google Scholar]
  2. Pirmatov, N., Muminov, M., Akberdiev, M., and Abdullayev, J. Use of hybrid renewable energy systems to excite autonomous synchronous machines. In AIP Conference Proceedings (Vol. 2432, No. 1, p. 020020). (2022). [Google Scholar]
  3. Pirmatov, N., Toirov, O., Bekishev, A., Kurbanov, N., Zaynieva, O., and Norkulov, U. Calculation of U-shaped characteristics and reactive power of synchronous compensator with longitudinal-transverse excitation. In AIP Conference Proceedings, Vol. 2552, No. 1, p. 040020. (2023). [Google Scholar]
  4. Karimov, R., and Bobojanov, M. Analysis of voltage stabilizers and non-contact relays in power supply systems. In E3S Web of Conferences, Vol. 216, p. 01162. (2020). [CrossRef] [EDP Sciences] [Google Scholar]
  5. Karimov, R. Study of the state of the issue of increasing the quality of electric energy in the power supply systems. In E3S Web of Conferences, Vol. 216, p. 01163. (2020). [CrossRef] [EDP Sciences] [Google Scholar]
  6. Karimov, R., Bobojanov, M., Tairova, N., Xolbutayeva, X., Egamov, A., and Shamsiyeva, N. Non-contact controlled voltage stabilizer for power supply of household consumers. In IOP Conference Series: Materials Science and Engineering, Vol. 883, No. 1, p. 012120. (2020). [CrossRef] [Google Scholar]
  7. Sapaev, K., Umarov, S., and Abdullabekov, I. Critical frequency of autonomous current inverter when operating on active-inductive load. In E3S Web of Conferences, Vol. 216, p. 01153. (2020). [CrossRef] [EDP Sciences] [Google Scholar]
  8. Umarov, S., Maxammatov, D., Akhunov, F., and Qodirov, F. The mathematical model for calculating transient modes of a valve converter. In AIP Conference Proceedings, Vol. 2402, No. 1, p. 060012. (2021). [Google Scholar]
  9. Umarov, S., Sapaev, K., Abdullabekov, I., Khamudkhanova, N., and Nazarov, M. Scheme of effective regulation of pumping station productivity. In AIP Conference Proceedings, Vol. 2402, No. 1, p. 060016. (2021). [Google Scholar]
  10. Mirsadov, M. M., Fayzullayev, B. K., Abdullabekov, I. A., Kupriyanova, A. S., Kurbanbayeva, D. I., and Boqijonov, U. A. The mutual influence of electromagnetic and mechanical processes in dynamic modes of inertial vibrating electric drives. In IOP Conference Series: Materials Science and Engineering, Vol. 862, No. 6, p. 062081. (2020). [CrossRef] [Google Scholar]
  11. Khamudkhanov, M. M., Abdullabekov, I. A., Khamudkhanova, N. B., Dusmatov, R. K., and Fayzullayev, B. K. Controls of the modes of operation of the pumping station with application of frequency-controlled electric drive. In IOP Conference Series: Materials Science and Engineering, Vol. 862, No. 6, p. 062048. (2020). [CrossRef] [Google Scholar]
  12. Pirmatov, N., Bekishev, A., Shernazarov, S., Kurbanov, N., and Norkulov, U. Regulation of mains voltage and reactive power with the help of a synchronous compensator by two-axis excitation. In E3S Web of Conferences, Vol. 264, p. 04028. (2021). [CrossRef] [EDP Sciences] [Google Scholar]
  13. Berdiev, U., Vecher, A., and Khasanov, F. Investigation of the frequency characteristics of composite iron powders with insulating oxide coatings. In E3S Web of Conferences, Vol. 264, p. 05014. (2021). [CrossRef] [EDP Sciences] [Google Scholar]
  14. Gapparov, A. U., Govor, G. A., Berdiyev, U. T., Hasanov, F. F., and Kurbanov, A. M. Magnetic-soft materials based on iron for electromechanical engineering. In IOP Conference Series: Earth and Environmental Science, Vol. 614, No. 1, p. 012048. (2020). [CrossRef] [Google Scholar]
  15. Despalatović, M., Jadrić, M., and Terzić, B. Real-time power angle determination of salient-pole synchronous machine based on air gap measurements. Electric power systems research, Vol.78(11), pp.1873-1880. (2008). [CrossRef] [Google Scholar]
  16. Tabachinsky A.S. Improving the energy efficiency of AC machines and reducing their metal consumption by improving the structure of the end parts of the stator winding. (2020). [Google Scholar]
  17. Ohanian, L. O. Experimental study of the electromagnetic field in the area of the frontal parts of the stator winding in the presence of conductive screens. Bulletin of the Tomsk Polytechnic University. Georesource Engineering, 265, 48-54. (1973). [Google Scholar]
  18. Berdiev, U., Burkhankhodzhaev, A., Tuychieva, M., Iksar, E., and Usmonov, K. Investigation of energy indicators with asymmetry of the voltage of the power source of mainline electric locomotives of alternating current. In AIP Conference Proceedings, Vol. 2552, No. 1, p. 030018. (2023). [Google Scholar]
  19. Yakushev, A. Ya., Nazirkhonov, T. M., Vikulov, I. P., and Markov, K. V. Determination of the main parameters of an asynchronous traction motor. Proceedings of the Petersburg University of Communications, Vol. 16(4), pp.592-601. (2019). [Google Scholar]
  20. Kim, B. T., Kwon, B. I., and Park, S. C. Reduction of electromagnetic force harmonics in asynchronous traction motor by adapting the rotor slot number. IEEE Transactions on Magnetics, 35(5), 3742-3744. (1999). [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.