EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 401 (2023) E3S Web of Conf., 401 (2023) 03038 References
Open Access
Issue
E3S Web of Conf.
Volume 401, 2023
V International Scientific Conference “Construction Mechanics, Hydraulics and Water Resources Engineering” (CONMECHYDRO - 2023)
Article Number 03038
Number of page(s) 8
Section Road Construction, Building Structures and Materials
DOI https://doi.org/10.1051/e3sconf/202340103038
Published online 11 July 2023
  1. Berdiev, U., Vecher, A., and Khasanov, F. Investigation of the frequency characteristics of composite iron powders with insulating oxide coatings. In E3S Web of Conferences (Vol. 264, p. 05014). (2021). [CrossRef] [EDP Sciences] [Google Scholar]
  2. Govor, G. A., Vecher, A. K., and Yanushkevich, K. I. Features of the magnetic characteristics of new composite materials based on iron powders. Klubovich VV. Perspektivnye materialy i tekhnologii, 278-299. (2017). [Google Scholar]
  3. Geng, K., Xie, Y., Xu, L., and Yan, B. Structure and magnetic properties of ZrO2-coated Fe powders and Fe/ZrO2 soft magnetic composites. Advanced Powder Technology, 28(9), 2015-2022. (2017). [CrossRef] [Google Scholar]
  4. Gapparov, A. U., Govor, G. A., Berdiyev, U. T., Hasanov, F. F., and Kurbanov, A. M. Magnetic-soft materials based on iron for electromechanical engineering. In IOP Conference Series: Earth and Environmental Science, Vol. 614, No. 1, p. 012048. (2020). [CrossRef] [Google Scholar]
  5. Bondar, O. I., Baliichuk, O. Y., Karzova, O. O., Krasnov, R. V., Marenych, O. L., and Ustimenko, D. Improvement of energy indicators of conventional electric driving asynchronous motors of non-standard technological equipment at the enterprises for repair of railway rolling stock through the use of energy-saving motors. (2019). [Google Scholar]
  6. Berdiev, U., Burkhankhodzhaev, A., Tuychieva, M., Iksar, E., and Usmonov, K. Investigation of energy indicators with asymmetry of the voltage of the power source of mainline electric locomotives of alternating current. In AIP Conference Proceedings, Vol. 2552, No. 1, p. 030018. (2023). [Google Scholar]
  7. Sustarsic, B., Sirc, A., and Milyavec, D. SMC materials in the design of small electric motors for domestic application. Euro PM, 629-635. (2004). [Google Scholar]
  8. O’handley, R. C. Modern magnetic materials: principles and applications. Wiley. (2000). [Google Scholar]
  9. Dmitrienko, S. G., Kochuk, E. V., Apyari, V. V., Tolmacheva, V. V., and Zolotov, Y. A. Recent advances in sample preparation techniques and methods of sulfonamides detection–a review. Analytica chimica acta, 850, 6-25. (2014). [CrossRef] [PubMed] [Google Scholar]
  10. Soft Magnetic Composite Technology CMC-update Hoganes AB. Swedes – N2, 2003 -8 p№ 1, 2005 -4p. [Google Scholar]
  11. Chen, J., Wang, D., Cheng, S., Wang, Y., Zhu, Y., and Liu, Q. (2015). Modeling of temperature effects on magnetic property of nonoriented silicon steel lamination. IEEE Transactions on Magnetics, 51(11), 1-4.. [CrossRef] [Google Scholar]
  12. Hultman, L., Höganäs, A. B., Lopes, H., and Brazil, H. Existing and future automotive applications for soft magnetic composites. Powder Metallurgy (PM). (2004). [Google Scholar]
  13. Sarkar K. Pai P.K, Katiyor P.K. Composite coatings from blast furnace pig iron by high velocity oxy -fuel (HVOF) process and their electrochemical behavior. Surf. Coat. Techol. Vol. 372. pp.72 – 83. (2019). [CrossRef] [Google Scholar]
  14. Timofeev I.A. Electrical materials and products -St. Petersburg; (2012). [Google Scholar]
  15. Endo, H. Technology Trends In Sintered Structural Part. P/M Science and Technology Briefs, 5(2), 21-25. (2003). [Google Scholar]
  16. Andersson, O., Larsson, M., and Hu, B. Lean Post Processing: Improved Machinability by Selection of PM Materials, Additives and Tool Materials. In European Congress and Exhibition on Powder Metallurgy. European PM Conference Proceedings (p. 1). The European Powder Metallurgy Association. (2010). [Google Scholar]
  17. Xu X. Y, Liu W.J., Zhong M.L., Sun H.Q., Chen G.N. Direct laser fabricated in Situ Materials Science Vol. 39. pp. 4289-4293. (2004). [Google Scholar]
  18. Tyng Ch.M. Features of the formation of a complex of magnetic properties of powdered Fe-P material -an analog of technical iron, obtained by hot die forging of a porous billet. (2010). [Google Scholar]
  19. Johnson P. Fracture and stress in powder compacts. University of technology, Sweden, (2006). [Google Scholar]
  20. Perigo, E. A., Weidenfeller, B., Kollár, P., and Füzer, J. Past, present, and future of soft magnetic composites. Applied Physics Reviews, 5(3), 031301. (2018). [CrossRef] [Google Scholar]
  21. Maziuk, V. V., Doctarau, V. V., and Rak, A. A. Miniature loop heat pipes with noninverted meniscus concept and treatment. International Journal of Low-Carbon Technologies, 1(3), 228-235. (2006). [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.