Open Access
| Issue |
E3S Web of Conf.
Volume 401, 2023
V International Scientific Conference “Construction Mechanics, Hydraulics and Water Resources Engineering” (CONMECHYDRO - 2023)
|
|
|---|---|---|
| Article Number | 04016 | |
| Number of page(s) | 9 | |
| Section | Mechanization, Electrification of Agriculture and Renewable Energy Sources | |
| DOI | https://doi.org/10.1051/e3sconf/202340104016 | |
| Published online | 11 July 2023 | |
- W. Konig. R. Fritsch, D. Kammermeier, “New Approaches to Characterizing the Performance of Coated cutting Tools”, Annal. of the CIRP, Vol.41, (1992). [Google Scholar]
- Lee S. S. The Evaluation of PVD Coated HSS Endmill. Journal of the Korean Society of Industry Convergence, 15(4), 103-109. (2012). [Google Scholar]
- H. K. Tonshoff, A. Mohlfeld,”Surface Treatment of cutting Tool Substrates”, Pergman, p.469-476, (1998). [Google Scholar]
- Vancoille, E., Celis, J.P., Roos, J.R.., “Tribology and Structural Characteriza-tion of a Physical Vapour Deposited TiC/Ti/N multilayer”, Tribology Int. 26, pp115-119, (1990). [Google Scholar]
- Bromark, M., Larsson, M., Hedenqvist, P., Olsson, M., Hogmark, S., & Bergmann, E. PVD coatings for tool applications: tribological evaluation. Surface engineering, 10(3), 205-214. (1994). [CrossRef] [Google Scholar]
- Wänstrand, O., Larsson, M., & Hedenqvist, P. (1999). Mechanical and tribological evaluation of PVD WC/C coatings. Surface and Coatings Technology, 111(2-3), 247-254. [CrossRef] [Google Scholar]
- Harlin, P., Carlsson, P., Bexell, U., & Olsson, M. Influence of surface roughness of PVD coatings on tribological performance in sliding contacts. Surface and coatings Technology, 201(7), 4253-4259. (2006). [CrossRef] [Google Scholar]
- Kottfer, D., Ferdinandy, M., Kaczmarek, L., Maňková, I., & Beňo, J. Investigation of Ti and Cr based PVD coatings deposited onto HSS Co 5 twist drills. Applied Surface Science, 282, 770-776. (2013). [CrossRef] [Google Scholar]
- Gerth, J., & Wiklund, U. The influence of metallic interlayers on the adhesion of PVD TiN coatings on high-speed steel. Wear, 264(9-10), 885-892. (2008). [CrossRef] [Google Scholar]
- Ronkainen, H., Nieminen, I., Holmberg, K., Leyland, A., Matthews, A., Matthes, B., & Broszeit, E. (1991). Evaluation of some titanium-based ceramic coatings on high speed steel cutting tools. Surface and Coatings Technology, 49(1-3), 468-473. [CrossRef] [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.