EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 401 (2023) E3S Web of Conf., 401 (2023) 05009 References
Open Access
Issue
E3S Web of Conf.
Volume 401, 2023
V International Scientific Conference “Construction Mechanics, Hydraulics and Water Resources Engineering” (CONMECHYDRO - 2023)
Article Number 05009
Number of page(s) 9
Section Engineering Materials Science, Intelligent Transport Systems and Transport Logistics
DOI https://doi.org/10.1051/e3sconf/202340105009
Published online 11 July 2023
  1. Petkanova, N.M. et al. Processing of textile waste and secondary raw materials / N.M. Petkanova. - Moscow. Legprombytizdat, 1990. [Google Scholar]
  2. Cherkashina, M.V. The use of textile waste / M.V. Cherkashina // Textile industry. - 1980. - No. 4. – 32 p. [Google Scholar]
  3. Ananiev, A.K. Technology and equipment of spinning production, 2010. P.105-107. [Google Scholar]
  4. Koshakova, M. Processing of mixtures from cotton fiber and wool / M. Koshakova // Textile industry. - 1998. - No. 2. - P.30-32. [Google Scholar]
  5. Sayfullaev, S.S. “Advanced technology of secondary raw material processing / S.S. Sayfullayev., Sh.Sh. Khakimov //” EPRA International Journal of Research and Development. – 2020. – 5(9). – P. 174-182. [Google Scholar]
  6. Rakhmonov, Kh., Relative speed and temperature effect investigation of the drying agent on the moisture content of cotton / Kh. Rakhmonov, S. Fayziev, Kh. Rakhimov, D. Kazakova // E3S Web of Conferences. – 2021. – 264, 04008. – P.1-7 [CrossRef] [EDP Sciences] [Google Scholar]
  7. Fayziev, S.Kh. Study of effect of speed and temperature of the drying agent in the feeder-loosened of new design on the quality of fiber / S.Kh. Fayziev, Kh.K. Rakhmonov // International journal of emerging trends in engineering research. – 2020. – 8(10). – P. 7008-7013. [CrossRef] [Google Scholar]
  8. Son E., Murodil M. Numerical calculation of an air centrifugal separator based on the SARC turbulence model //Journal of Applied and Computational Mechanics. – 2020. [Google Scholar]
  9. Bradshaw P., Ferriss D. H., Atwell N. P. “Calculation of boundary layer development using the turbulent energy equation”, J. Fluid Mech., 1967. 28, P.593-616 [CrossRef] [Google Scholar]
  10. B.M. Kholboev, D.P. Navruzov, D.S. Asrakulova, N.R. Engalicheva and A.A. Turemuratova. Comparison of the results for calculation of vortex currents after sudden expansion of the pipe with different diameters // Int. J. of Applied Mechanics and Engineering, 2022, vol.27, No.2, pp.115-123. DOI: 10.2478/ijame-2022-0023 [Google Scholar]
  11. Smirnov P., Menter F. Sensitization of the SST turbulence model to rotation and curvature by applying the Spalart-Shur correction term // Proc. of ASME Turbo Expo 2008: Power for Land, Sea and Air, GT 2008, Germany, Berlin, June 9-13, 2008. 10 p. [Google Scholar]
  12. Patankar, Suhas V., and D. Brian Spalding. “A Calculation Procedure for Heat Mass and Momentum Transfer in Three Dimensional Parabolic Flows” International Journal of Heat Mass Transfer 15 (1972): 1787-1806. [CrossRef] [Google Scholar]
  13. Bazarov, O., Khujaev, I., Mamadaliev, K., & Khodjaev, S. (2021). Numerical method for solving the problem of the gas-dynamic state of a main gas pipeline section relief of a variable cross-sectional area. In IOP Conference Series: Materials Science and Engineering (Vol. 1030, No. 1, p. 012126). IOP Publishing. [CrossRef] [Google Scholar]
  14. Khujaev, I., & Mamadaliev, K. (2020). An iterative method for solving nonlinear equations of real gas pipeline transport. In Journal of Physics: Conference Series (Vol. 1441, No. 1, p. 012145). [CrossRef] [Google Scholar]
  15. Malikov Z.М., Madaliev М.E., Navruzov D.P., Adilov К. Numerical study of an axisymmetric jet based on a new turbulence model // International Scientific Conference on Actual Problems of Applied Mechanics, AIP Conference Proceedings. [Google Scholar]
  16. Kh, Nazarov F. Comparing turbulence models for swirling flows //Herald of the Bauman Moscow State Technical University, Series Natural Sciences. – 2021. – №. 2. – p. 95. [Google Scholar]
  17. Madaliev, E., Madaliev, M., Adilov, K., & Pulatov, T. (2021). Comparison of turbulence models for two-phase flow in a centrifugal separator. In E3S Web of Conferences (Vol. 264, p. 01009). [CrossRef] [EDP Sciences] [Google Scholar]
  18. Malikov, Z. M., & Madaliev, M. E. (2021). Mathematical modeling of a turbulent flow in a centrifugal separator. Vestnik Tomskogo Gosudarstvennogo Universiteta. Matematika i Mekhanika, (71), 121-138. [Google Scholar]
  19. Mirzoev, A. A., Madaliev, M., & Sultanbayevich, D. Y. (2020, November). Numerical modeling of non-stationary turbulent flow with double barrier based on two liquid turbulence model. In 2020 International Conference on Information Science and Communications Technologies (ICISCT) (pp. 1-7). IEEE. [Google Scholar]
  20. Hamdamov, M., Mirzoyev, A., Buriev, E., & Tashpulatov, N. (2021). Simulation of non-isothermal free turbulent gas jets in the process of energy exchange. In E3S Web of Conferences (Vol. 264, p. 01017). EDP Sciences. [CrossRef] [EDP Sciences] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.