Open Access
Issue |
E3S Web of Conf.
Volume 401, 2023
V International Scientific Conference “Construction Mechanics, Hydraulics and Water Resources Engineering” (CONMECHYDRO - 2023)
|
|
---|---|---|
Article Number | 05074 | |
Number of page(s) | 8 | |
Section | Engineering Materials Science, Intelligent Transport Systems and Transport Logistics | |
DOI | https://doi.org/10.1051/e3sconf/202340105074 | |
Published online | 11 July 2023 |
- Baurova N., Zorin V. Application of polymer composite materials in mechanical engineering. INFRA-M Academic Publishing LLC. P.301 https://doi.org/10.12737/textbook_5a65d038520df1.41774771. [Google Scholar]
- Yoqubov, B.B., Ibadullaev, A., Yoqubova, D.Q., Teshabaeva, E.U.Prospects and Development of Research of Composite Elastomer Materials Journal of Siberian Federal University: Chemistry this link is disabled, 2021, 14(4), pp. 464–476. [Google Scholar]
- Negmatov, N.S., Ziyamukhamedova, U.A., Kuluev, A.R. Antifriction materials and water-soluble compounds on basis of polymers for reducing the mechanical damage of cotton fibers. Plastic Masses: Synthesis, Properties, Processing, Application, 2002, (1), pp. 42–45. [Google Scholar]
- Ziyamukhamedova U., Djumabaev D., Shaymardanov B. Mechanical chemical modification method used in the development of new composite materials based on epoxy binder and natural minerals// Turkish journal of Chemistry.–Ankara (Turkey), 2013. –vol. 37, N 1. –pp. 51 –56. [Google Scholar]
- Yoqubov, B. B., Ibadullaev, A., Yoqubova, D. Q., Teshabaeva, E. U. Prospects and development of research of compositeelastomer materials, J. Sib. Fed. Univ. Chem., 2021, 14(4), 464–476. DOI: 10.17516/1998-2836-0255 [CrossRef] [Google Scholar]
- Vapaev M.D. Akhmadjonov S.A. Teshabaev. Influence of modified Angren kaolin on the kinetics of vulcanization of elastomer compositions. Universum: technical sciences 01/24/2019. [Google Scholar]
- Umarov, A.V., Askarov, M.A., Makhmudov, R.H., Kasimova, G.A., Investigation of the electroconductivity of resistive compositions based on glass and cadmium oxide with alternating current// Turkish Journal of Physics, 1997, 21(2), pp. 200–205 [CrossRef] [Google Scholar]
- Magrupov, M.A., Umarov, A.V., Khamidov, Sh.R., Makhmudov, R.Kh., About the interacting of glass-binder and current-conducting phase in resistive compositions, // Elektrichestvo, 1994, (6), p. 70–72 [Google Scholar]
- Magrupov, M.A., Umarov, A.V., Khamidov, Sh.R., Makhmudov, R.Kh., Electrical conductivity of a sitall // Glass and Ceramics, 1992, 49(7), p. 313–314 [CrossRef] [Google Scholar]
- R.S. Akhmetkhanov E.F. Dubinin. Problems of Mechanical Engineering and Machine Reliability, 2020, No. 2, pp. 106-112. OI: 10.31857/S0235711920020030 [Google Scholar]
- Umirzakov, B.E., Donaev, S.B. On the creation of ordered nuclei by ion bombardment for obtaining nanoscalesi structures on thesurface of CaF2 films // (2017) Journal of Surface Investigation, 11 (4), pp. 746-748.DOI: 10.1134/S1027451017040139 [CrossRef] [Google Scholar]
- Donaev, S.B., Tashatov, A.K., Umirzakov, B.E. Effect of Ar+-ion bombardment on the composition and structure of the surface of CoSi2/Si(111)nanofilms // (2015) Journal of Surface Investigation, 9 (2), pp. 406-409.DOI: 10.1134/S1027451015020263 [CrossRef] [Google Scholar]
- A.K.Singh, R.B.Balbir, S.Kaith. Composite materials based on recycled polyethylene terephthalate and their properties –A comprehensive review. Composites Part B: Engineering. Volume 219, 15 August 2021, 108928. doi.org/10.1016/j.compositesb.2021.108928. [CrossRef] [Google Scholar]
- Umirzakov, B.E., Donaev, S.B., Mustafaeva, N.M. Electronic and Optical Properties of GaAlAs/GaAs Thin Films // (2019) Technical Physics, 64 (10), pp. 1506-1508.DOI: 10.1134/S1063784219100220 [CrossRef] [Google Scholar]
- Umirzakov, B.E., Ashurov, R.K., Donaev, S.B. The Morphology and Electronic Properties of Si Nanoscale Structures on a CaF 2 Surface // (2019) Technical Physics, 64 (2), pp. 232-235.(2019) TechnicalPhysics, 64 (2), pp. 232-235. [CrossRef] [Google Scholar]
- Rakhmatov E.A., Ziyamukhamedov Zh.U. Prospects for the use of methods of mechano-chemical modification for the production of composite polymer materials // In the collection of scientific works of the Republican scientific and technical conference “Problems and prospects of innovative technology and technology.” Tashkent-2019. Pages 223-225 [Google Scholar]
- Yelda Akçin Ergün. Mechanical Properties of Epoxy Composite Materials Produced with Different Ceramic Powders. Journal of Materials Science and Chemical Engineering. Vol.7 No.12, December 2019. 10.4236/msce.2019.712001. DOI: 10.4236/msce.2019.712001 [Google Scholar]
- McGratha, M., Parnas, R.S., King, S.H., Schroeder, J.L., Fischer, D.A. and Lenhart, J.L. (2008) Investigation of the Thermal, Mechanical, and Fracture Properties of Alumina-Epoxy Composites. Polymer, 49, 999-1014. https://doi.org/10.1016/j.polymer.2007.12.014 [CrossRef] [Google Scholar]
- Kardara, P., Ebrahimi, M. and Bastani, S. (2008) Study the Effect of Nano-Alumina Particles on Physical-Mechanical Properties of UV Cured Epoxy Acrylate via Nano-Indentation. ProgressinOrganicCoatings, pp. 62, 321-325. [Google Scholar]
- Zakharov N.M., Alushkina T.V. Optimization of the composition of protective coatings based on epoxy resins // Electronic scientific journal “Oil and Gas Business”, 2002. http://www.ogbus.ru/authors/Zakharov/zak_2.pdf. -15 p. [Google Scholar]
- Research report. Study of the processes of structure formation and functional properties of heterocomposite polymeric materials for mechanical engineering based on local raw materials and energy resources. Tashkent. TSTU. 2020. -268 p. [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.