Open Access
Issue
E3S Web of Conf.
Volume 402, 2023
International Scientific Siberian Transport Forum - TransSiberia 2023
Article Number 04009
Number of page(s) 8
Section Automotive Engineering, Engines, Clean Fuels, and E-Mobility
DOI https://doi.org/10.1051/e3sconf/202340204009
Published online 19 July 2023
  1. Rail transport: Encyclopedia / Ch. ed. J51 N.S. Konarev. – M.: Great Russian Encyclopedia, 1994.–559 p. [Google Scholar]
  2. Structural features of railcars of a new generation / A.A. Yukhnevsky, D.I. Goncharov // Heavy engineering.–2015. No. 1-2.– p. 25-30 [Google Scholar]
  3. Service motorcars of AC1 series. Site “Steam locomotives of epochs” - Access mode: http://www.paravozoff.ru/articles/show/144. [Google Scholar]
  4. The choice of directions for the development of the rolling stock of the railways of Uzbekistan / R.V. Rakhimov // Transport of the Russian Federation. - 2018. - No. 1 (74). – P. 71 – 74. [In Russian: Rakhimov R.V. Wagon fleet of Uzbekistan's railways]. [Google Scholar]
  5. Improving the design of a passenger car for its conversion into a dynamometer car for special technical purposes / R.V. Rakhimov, F.F. Khikmatov // Proceedings of RGUPS. - 2021. - No. 4 (57). - S. 91 - 95. [Google Scholar]
  6. Analysis and prospects for the development of performance cargo transportation in the Republic of Uzbekistan / R. Rakhimov, B. Abdullaev, Ya. Hurmatov, O. Haydarov, K. Inoyatov // Proceedings of the 1st International Conference on Problems and Perspectives of Modern Science (ICPPMS-2021). - TIIAME, 2021. - P. 1 - 6. [Google Scholar]
  7. Prospects for the development of car building in the Republic of Uzbekistan / Ya.O. Ruzmetov, R.V. Rakhimov // Collection of scientific papers of the VIII All-Russian scientific and practical conference “Problems and prospects for the development of car building” (Bryansk, April 18 - 19, 2019). - Bryansk: BSTU, 2019. - P. 147 - 150. [Google Scholar]
  8. About designing the height of the first profile of the marshalling hump. Jabbarov Sh.B., Khaidarov O.U., Khurmatov Ya.A., Inoyatov K.Kh., Khozhiev N.K. Innovation. The science. Education. 2021. No. 36. S. 1023-1035.04 [Google Scholar]
  9. Vertical vibrations of a freight car as a uniaxial carriage from a wave of unevenness of the path. Shukhrat Djabbarov, Shukhrat Saidivaliev, Bakhrom Abdullaev, Sardor Inagamov and Yuldashov Abdusaid. E3S Web Conf. Volume 371, 2023 International Scientific Conference “Fundamental and Applied Scientific Research in the Development of Agriculture in the Far East” (AFE-2022) [Google Scholar]
  10. Designing the height of the first profile of the marshaling hump. Turanov K., Gordienko A., Saidivaliev S., Djabborov S. In the collection: E3S Web of Conferences. Topical Problems of Green Architecture, Civil and Environmental Engineering, TPACEE 2019. 2020. P. 03038.612 [Google Scholar]
  11. Substantiation of technical solutions for the body of a railcar with two diesel generator sets / D.I. Goncharov, A.S. Zhukov, P.S. Lomakov et al.// Rolling Stock of the 21st Century: Ideas, Requirements, Projects, VIII International Scientific and Technical Conference. - St. Petersburg, 2013. - S. 76-79. [Google Scholar]
  12. Influence of solar radiation on heat flows of refrigerated wagons and containers. Abdullaev B.A., Galimova F.S., Otajonov Kh.Kh., Sultonaliev D.D., Abdurakhmonov P.K., Abdirakhmanov J.A. The 1st International Conference on Problems and Perspectives of Modern Science AIP Conference Proceedings, 2022, pp. 030005-1 – 030005-5. [Google Scholar]
  13. Analysis and prospects for the development of performance cargo transportation in the Republic of Uzbekistan. Rakhimov R.V., Abdullaev B.A., Hurmatov Ya.A., Haydarov O.U., Inoyatov K.Kh. The 1st International Conference on Problems and Perspectives of Modern Science AIP Conference Proceedings, 2022, pp. 030066-1–030066-6. [Google Scholar]
  14. Development of a preliminary design and calculation methods for a body with a removable load-bearing roof adapted for large-block assembly. Participation in the development of the technical design of the body and blocks of internal equipment: Final stage / KF VNIIV; Ruk. topics Meister V.M. – Subject code 30/2-73; No. GR 7307294. Kalinin, 1974. 86 p. [Google Scholar]
  15. Calculation of load-bearing structures using the finite element method / E.N. Nikolsky. - Bryansk: BITM, 1982. - 99s. [Google Scholar]
  16. Structural modeling in Femap with NX Nastran. Rychkov, S.P. – M.: DMK Press, 2013. – 784 p.: ill. [Google Scholar]
  17. Finite element method in engineering / O. Zenkevich; per. from English. ed. B.E. Win. - M.: Mir, 1975 - 541s. [Google Scholar]
  18. Application of the finite element method / L. Segerlind; per. from English. ed. B.E. Win. – M.: Mir, 1979 – 392 p. [Google Scholar]
  19. Calculation of car units for the strength of the FEM / Yu.P. Boronenko, A.V. Tretyakov, G.E. Sorokin // Textbook and guide to the use of educational software packages. - L .: LIIZhT, 1991. - 39 p. [Google Scholar]
  20. Dynamic loading of the car / M.M. Sokolov, V.D. Khusidov, Yu.G. Minkin.– M.: Transport, 1981 [Google Scholar]
  21. Evaluation of the work of the brake equipment of freight cars on the section Angren - Pap JSC “Uzbek Railways”: Galai, E. & Inagamov, S. & Yuldashov, A. Mechanics. Research and innovation. no. 13.-p. 47-54. [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.