Open Access
Issue |
E3S Web of Conf.
Volume 402, 2023
International Scientific Siberian Transport Forum - TransSiberia 2023
|
|
---|---|---|
Article Number | 05006 | |
Number of page(s) | 9 | |
Section | Solar Energy Conversion, Sustainable Energy and Smart Grid | |
DOI | https://doi.org/10.1051/e3sconf/202340205006 | |
Published online | 19 July 2023 |
- Sh. A. Karimov, Sh. M. Shakirov, M. A. Mamatkosimov Mirror material technology. - Tashkent: - Science and technology, 159 (2015) [Google Scholar]
- A. A. Abdurakhmanov, M. A. Mamatkosimov, Yu. Z. Akhadov, A. A. Kuchkarov, Calculation of optical-geometric parameters of paraboloid and parabocylindrical mirror-concentric systems, Journal of Reports of the Academy of Sciences, 4, 29–32 (2014) [Google Scholar]
- G. S. Korman, K. L. Lutra, Ceramic composites impregnated with silicon melt (HiPerComp ™), Handbook of ceramic composites. Springer US, 99-115 (2005) [Google Scholar]
- B. M. Kamanov, M. A.Mamatkosimov, A. I. Mustafoev, localization of imported ceramic tiles, Journal of Irrigation and Melioration, Tashkent, 3, 28-32 (2020) [Google Scholar]
- A. I. Mustafoev, M. A. Mamatkosimov, L. Suvonova, B. M. Kamanov, M. Dzhalilov, Effect of heating on phase changes in geomodifiers of trenches based on serpentine slope, Journal “AGROILM”, Tashkent, 4, 97-99 (2020) [Google Scholar]
- B. M. Kamanov, M. A. Mamatkosimov, A. I. Mustafoev, Production of heat-resistant refractory plates, Journal “Irrigation and melioration”, Tashkent, 4(18), 63-66 (2019) [Google Scholar]
- B. M. Kamanov, M. A. Mamatkosimov, A. I. Mustafoev, Substantiation of obtaining a porcelain plate from a serpentine sample. Materials of the international conference “Innovations in the oil and gas industry, modern energy and its problems” May 26, 757-758 (2020) [Google Scholar]
- B. M. Kamanov, M. A. Mamatkosimov, A. I. Mustafoev, Manufacturing of a thermostatic electric oven operating at a temperature of 17000C. Collection of materials of the International Scientific and Technical Conference “Innovations in Construction, Energy Saving Technologies, Structural and Seismic Safety of Buildings and Structures”, held on November 7-9, 2019 at the Namangan Civil Eng. Institute of the Ministry of Industry and Trade. Higher and secondary specialized education of the Republic of Uzbekistan, 232-234 (2019) [Google Scholar]
- B. M. Kamanov, M. A. Mamatkosimov, A. I. Mustafoev, On November 7-9, 2019, the Namangan Civil Engineering Institute of the Ministry of Higher and Secondary Special Education hosted an international scientific and technical conference “Innovations in construction, energy-saving technologies, constructive and seismic safety of buildings and structures.” set of materials of the Republic of Uzbekistan, 203-206 [Google Scholar]
- Mamatkosimov M. A., Mustafoev A., Development and production of import-substituting heat-resistant heat-resistant plates based on local raw materials. International scientific and practical seminar within the framework of the project “Renes: Development of a master’s program in renewable energy and sustainable environment”, 37-39 (2019) [Google Scholar]
- M. A. Mamatkosimov, A. I. Mustafoev, Features of thermostatic electric oven at 17000C from local raw materials. International scientific and practical seminar in the framework of the project “Renes: Development of a master’s program in the field of renewable energy and sustainable environment”, 39-41 (2019) [Google Scholar]
- B. M. Kamanov, M. A. Mamatkosimov, A. I. Mustafoev, A. A. Abduminov, Production of serpentine pottery for everyday use using a large solar oven. International scientific and practical seminar within the framework of the project “Renes: Development of a master’s program in the field of renewable energy and sustainable environment”, 42-46 (2019) [Google Scholar]
- M. A. Mamatkosimov, A. I. Mustafoev, Production of heat-resistant rare refractory materials from ceramic materials based on local raw materials in the Large Solar Furnace. International scientific and practical seminar within the framework of the project “Renes: Development of a master’s program in the field of renewable energy and sustainable environment”, 46-49 (2019) [Google Scholar]
- M. A. Mamatkosimov, A. I. Mustafoev, Improving the heat resistance of ceramic products obtained from local raw materials. International scientific-practical seminar within the framework of the project “Renes: Development of a master’s program in the field of renewable energy and sustainable environment”, 49-51 (2019) [Google Scholar]
- A. A. Abdurakhmanov, M. A. Mamatkasimov, A. A. Kuchkarov, Yu. B. Sobirov, A. A. Abdumuminov, The method of aligning the optical axis of the heliostat tracking sensors with the main optical axis of the concentrator, Solar technology, Tashkent, 3, 31-36 (2016) [Google Scholar]
- A. A. Abdurakhmonov, M. A. Mamatkosimov, A. A. Kuchkarov, Yu. B. Sobirov, N. N. Kulakhmedov, Zh. Z. Akhadov, Alignment of faces of flat and focusing heliostats, concentrators and concentrating systems of Fresnel mirrors, Applied Solar Energy, 51(2), 151-155 (2015) [CrossRef] [Google Scholar]
- G. G. Gnesin, Carbidokremnievye materials, Moscow «Metallurgy», 216 (1977) [Google Scholar]
- http://matprop.ru/SiC_mechanic (Last accessed 19.06.2014). [Google Scholar]
- Chemical encyclopedia: v 5 t.: t. 2, Moscow, Sov. encycl., 671 (1990) [Google Scholar]
- Y. Kim, J. Lee, Effect of polycarbosilane addition on mechanical properties of hot-pressed silicon carbide, Journal of material science, 27, 4746–4750 (1992) [CrossRef] [Google Scholar]
- X. F. Zhang, Q. Yang, L. Jonghe, Microstructure development in hotpressed silicon carbide: effects of aluminum, boron, and carbon additives, ActaMaterialia, 51(13), 3849–3860 (2003) [Google Scholar]
- S. V. Jitnyuk, Ceramics based on carbide silicon, modified additives evtectik composition. Dissertation for the degree of candidate of technical sciences, Moscow, 174 (2014) [Google Scholar]
- J. N. Ness, T. F. Page, Microstructural evolution in reaction-bonded silicon carbide, Journal of Materials Science, 21(4), 1377–1397 (1986) [CrossRef] [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.