Open Access
| Issue |
E3S Web of Conf.
Volume 402, 2023
International Scientific Siberian Transport Forum - TransSiberia 2023
|
|
|---|---|---|
| Article Number | 10005 | |
| Number of page(s) | 6 | |
| Section | Transport Mechanical Engineering | |
| DOI | https://doi.org/10.1051/e3sconf/202340210005 | |
| Published online | 19 July 2023 | |
- M. Dezhin, Engineering Journal of Don 78, 264-271 (2021) [Google Scholar]
- M. Dezhin, Bulletin of Construction Equipment 1050, 28-30 (2022) [Google Scholar]
- A. Strekalkin, Ph.D. thesis, Vladimir State University named after Alexander and Nikolay Stoletovs, (2022) [Google Scholar]
- Xu Yun, Ph.D. thesis, Saint Petersburg State University of Architecture and Civil Engineering, (2015) [Google Scholar]
- A. Chernyh, Sh. Mamedov, D. Nizhegorodcev and S. Moskov, International Journal of Humanities and Natural Sciences 10, 28-34, (2020) [Google Scholar]
- M. Augustin and G. Flatscher, “Verification of SHERPA connections based on the SHERPA manual”, in the collection of 16 International Timber Construction Conference, edited by S. Burri et al. (Publisher Forum Holzbau, Graz, pp. 1–16, (2010) [Google Scholar]
- M. Augustin, “Transfer of high loads with Sherpa system connectors”, in the collection of 15 International Timber Construction Conference, edited by S. Burri et al. (Publisher Forum Holzbau, Graz,), pp. 1–21, (2009) [Google Scholar]
- T. Bogensperger and F. Hude, “Development of a heavy-duty connection for main-sub-beam connections”, in the collection of 6 International Timber Construction Conference, edited by S. Burri et al. (Publisher Forum Holzbau, Graz, pp. 209–224, (2007) [Google Scholar]
- H. Schinner, “Fastening wooden components to reinforced concrete substrates using system connectors”, in the collection of 18 International Timber Construction Conference, edited by S. Burri et al. (Publisher Forum Holzbau, Graz, pp. 1–20, (2012) [Google Scholar]
- G. Pirnbacher, “Stress and optimization potential of self-drilling wood screws”, in the collection of 15 International Timber Construction Conference, edited by S. Burri et al. (Publisher Forum Holzbau, Graz, pp. 1–20, (2009) [Google Scholar]
- T. Uibel, “Assessment of the risk of splitting when screwing in self-drilling wood screws”, in the collection of 15 International Timber Construction Conference, edited by S. Burri et al. (Publisher Forum Holzbau, Graz, pp. 1–16, (2009) [Google Scholar]
- Y. Pluess and R. Brandner, “Investigations into the load-bearing behavior of axially loaded screw groups in the narrow side of cross-laminated timber (CLT)”, in the collection of 20 International Timber Construction Conference, edited by S. Burri et al. (Publisher Forum Holzbau, Garmisch-Partenkirchen, pp. 1–14, (2014) [Google Scholar]
- V. Linkov, Engineering Journal of Don 77, 339-346, (2020) [Google Scholar]
- V. Linkov, Engineering Journal of Don 52, 159-168, (2019) [Google Scholar]
- V. Linkov, Proceedings of Higher Education Institutions. Textile Industry Technology 394, 179-185, (2021) [Google Scholar]
- V. Linkov, Proceedings of Higher Education Institutions. Textile Industry Technology 369, 212-217, (2017) [Google Scholar]
- V. Linkov, Proceedings of Higher Education Institutions. Textile Industry Technology 380, 153-158, (2019) [Google Scholar]
- V. Linkov, Proceedings of Higher Education Institutions. Textile Industry Technology 375, 84-89, (2018) [Google Scholar]
- V. Linkov, Scientific Review 23, 11-15, (2017) [Google Scholar]
- A. Najchuk and M. Babaev, Industrial and Civil Engineering 1, 21-23, (2010) [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.