EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 403 (2023) E3S Web Conf., 403 (2023) 03003 References
Open Access
Issue
E3S Web Conf.
Volume 403, 2023
XII International Scientific and Practical Forum “Environmentally Sustainable Cities and Settlements: Problems and Solutions” (ESCP-2023)
Article Number 03003
Number of page(s) 11
Section Environmental Aspects of Construction Technologies
DOI https://doi.org/10.1051/e3sconf/202340303003
Published online 25 July 2023
  1. Zielinski, T.G., et al., Benchmarks for microstructure-based modelling of sound absorbing rigid-frame porous media. Journal of Sound and Vibration, 2020. 483. [Google Scholar]
  2. Allard, J. and N. Atalla, Propagation of sound in porous media: modelling sound absorbing materials 2e. 2009: John Wiley & Sons. [CrossRef] [Google Scholar]
  3. Trinh, V.H., et al., Learning acoustic responses from experiments: A multiscale-informed transfer learning approach. The Journal of the Acoustical Society of America, 2022. 151(4): p. 2587–2601. [CrossRef] [PubMed] [Google Scholar]
  4. Trinh, V.H., Effect of membrane content on the acoustical properties of three-dimensional monodisperse foams: Experimental, numerical and semi-analytical approaches. 2018, Ph.D. Dissertation, Paris-Est University. [Google Scholar]
  5. Attenborough, K. and I.L. Vér, Sound-Absorbing Materials and Sound Absorbers. Noise and Vibration Control Engineering: Principles and Applications, 2005: p. 215–277. [CrossRef] [Google Scholar]
  6. Arenas, J.P. and M.J. Crocker, Recent trends in porous sound-absorbing materials. Sound Vib., 2010. 44(7): p. 12–18. [Google Scholar]
  7. Siddika, A., A. Hajimohammadi, and V. Sahajwalla, Powder sintering and gel casting methods in making glass foam using waste glass: A review on parameters, performance, and challenges. Ceramics International, 2022. 48(2): p. 1494–1511. [CrossRef] [Google Scholar]
  8. Gasser, S., F. Paun, and Y. Bréchet, Absorptive properties of rigid porous media: Application to face centered cubic sphere packing. The Journal of the Acoustical Society of America, 2005. 117(4): p. 2090–2099. [CrossRef] [PubMed] [Google Scholar]
  9. Mazrouei-Sebdani, Z., et al., A review on silica aerogel-based materials for acoustic applications. Journal of Non-Crystalline Solids, 2021. 562: p. 120770. [CrossRef] [Google Scholar]
  10. Talebi, Z., et al., Silica aerogel/polyester blankets for efficient sound absorption in buildings. Construction and Building Materials, 2019. 220: p. 76–89. [CrossRef] [Google Scholar]
  11. Liu, P., H. Qing, and H. Hou, Primary investigation on sound absorption performance of highly porous titanium foams. Materials and Design, 2015. 85: p. 275–281. [CrossRef] [Google Scholar]
  12. Salissou, Y. and R. Panneton, Pressure/mass method to measure open porosity of porous solids. Journal of applied physics, 2007. 101(12): p. 124913. [CrossRef] [Google Scholar]
  13. Stinson, M.R. and G.A. Daigle, Electronic system for the measurement of flow resistance. The Journal of the Acoustical Society of America, 1988. 83(6): p. 2422–2428. [CrossRef] [Google Scholar]
  14. ISO, 9053-1:2018: Acoustics — Determination of airflow resistance — Part 1: Static airflow method. International Standards Organization: Geneva, Switzerland, 1998. [Google Scholar]
  15. Salissou, Y. and R. Panneton, Wideband characterization of the complex wave number and characteristic impedance of sound absorbers. J. Acoust. Soc. Am., 2010. 128(5): p. 2868–2876. [CrossRef] [PubMed] [Google Scholar]
  16. ISO, 10534-2:1998: Acoustics-Determination of Sound Absorption Coefficient and Impedance in Impedance Tubes-Part 2: Transfer-Function Method. 1998, CEN, European Committee for Standardization Brussels, Belgium. [Google Scholar]
  17. Olny, X. and R. Panneton, Acoustical determination of the parameters governing thermal dissipation in porous media. J Acoust Soc Am, 2008. 123(2): p. 814–24. [CrossRef] [PubMed] [Google Scholar]
  18. Panneton, R. and X. Olny, Acoustical determination of the parameters governing viscous dissipation in porous media. J. Acoust. Soc. Am., 2006. 119(6)(4): p. 2027–2040. [CrossRef] [PubMed] [Google Scholar]
  19. ISO, ISO 11654:1997: Acoustics — Sound absorbers for use in buildings — Rating of sound absorption. 1997, CEN, European Committee for Standardization Brussels, Belgium. [Google Scholar]
  20. ASTM, ASTM C423-17: Standard Test Method for Sound Absorption and Sound Absorption Coefficients by the Reverberation Room Method. 2017, ASTM International West Conshohocken, PA. [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.