Open Access
| Issue |
E3S Web Conf.
Volume 403, 2023
XII International Scientific and Practical Forum “Environmentally Sustainable Cities and Settlements: Problems and Solutions” (ESCP-2023)
|
|
|---|---|---|
| Article Number | 03013 | |
| Number of page(s) | 7 | |
| Section | Environmental Aspects of Construction Technologies | |
| DOI | https://doi.org/10.1051/e3sconf/202340303013 | |
| Published online | 25 July 2023 | |
- S. Takibai, K. Cakanov, D. Sungidmaa, M. Kuderin, B. Kudryshova, Thermal analysis of the cenosphere of floating ashes of thermal power plants for the production of aerated concrete, in Journal of Chemical Technology and Metallurgy. 57, 267–270 (2022) [Google Scholar]
- D.E. Altun, I.O. Tikhonova, Assessment of the prospects for the use of ash and slag waste in the Russian Federation, in achievements in the field of chemistry and chemical technologies, 36, 12(261), 15–17 (2022) (in Russian) [Google Scholar]
- A. A. Lavrinenko, I. V. Kunilova, G.Yu. Golberg, et al. On regulatory documentation in the field of using ash and slag wastes from coal combustion for the extraction of rare earth elements, in the Proceedings of the III International Scientific and Practical Conference of Young Scientists The role of technical regulation and standardization in the era of digital economy, November 25, 2021, Yekaterinburg, Russia (2021) (in Russian) [Google Scholar]
- V. B. Petropavlovskaya et al., Environmental management in ash and slag waste management in Russia, in IOP Conf. Ser.: Earth Environ. Sci., 1010, 012135 (2022) [CrossRef] [Google Scholar]
- V. Petropavlovskaya, M. Zavadko, Gypsum dispersed reinforced compositions with an additive complex based on technogenic waste, in Expert: Theory and Practice, 106–110 () [Google Scholar]
- B. I. Bulgakov, V. Q. D. Nguyen, A. V. Aleksandrova, O. A. Larsen, N. A. Galtseva, High-performance concrete produced with locally available materials, in Magazine of Civil Engineering, 117(1), 11702 (2023) [Google Scholar]
- S. Fedosov, B. Bulgakov, H. X. Ngo, O. Aleksandrova, V. Solovev Theoretical and Experimental Models to Evaluate the Possibility of Corrosion Resistant Concrete for Coastal Offshore Structures, in Materials, 15(13), 4697 (2022) [CrossRef] [PubMed] [Google Scholar]
- Y. Sweity, V. Petropavlovskaya, D. Korovitsyn, K. Petropavlovskii, T. Novichencova, Problems of disposal of acid fuel ash in the composition of building composites, 020021. doi: 10.1063/5.0125393 (2023) [Google Scholar]
- I. K. Domanskaya et al. Fly ash-based geopolymer binders: perspective materials for sustainable building, in IOP Conf. Ser.: Materials Science and Engineering, 481, 012049, (2019) [CrossRef] [Google Scholar]
- O. V. Aleksandrova et al., The Effect of Mineral Admixtures and Fine Aggregates on the Characteristics of High-Strength Fiber-Reinforced Concrete, in Materials, 15(24), 8851 (2022) [CrossRef] [PubMed] [Google Scholar]
- D. Siyu, L. Hongqiang, Ch. Fangqin, S. Huiping, Ya. Hengquan Investigation into the synergistic effects in hydrated gelling systems containing fly ash, desulfurization gypsum and steel slag, doi: 10.1016/j.conbuildmat.2018.07.241 (2018) [Google Scholar]
- A.Ch. Othman, M.Yu. Drebezgova, E. Kovalenko, S. Vasheva, Features of structure formation of composite gypsum binders with a complex of mineral and organic additives, in Bulletin of Belgorod State Technological University named after. V. G. Shukhov, 8, 24–33 (2023) [CrossRef] [Google Scholar]
- A. Volodchenko, V. Lesovik, A. Volodchenko, V. Voronov, High-Efficiency Wall Materials Based on Technogenic Aluminosilicate Raw Materials, doi: 10.1007/978-3-031-20459-3_1 (2023) [Google Scholar]
- N. Kondratieva et al., Study of modified gypsum binder, in Construction and building materials, 149, 535–542 (2017) [CrossRef] [Google Scholar]
- M.I. Halliluin et al., Influence of lime additive on the physical and mechanical properties of composite gypsum-lime-pozzolanic binders, in Proceedings of KGASU, 4, 304–311 (2015) [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.