EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 405 (2023) E3S Web of Conf., 405 (2023) 03019 References
Open Access
Issue
E3S Web of Conf.
Volume 405, 2023
2023 International Conference on Sustainable Technologies in Civil and Environmental Engineering (ICSTCE 2023)
Article Number 03019
Number of page(s) 17
Section Structural Engineering & Concrete Technology
DOI https://doi.org/10.1051/e3sconf/202340503019
Published online 26 July 2023
  1. B. Hugo, “Seismic Conceptual Design of Buildings – Basic Principles for Engineers, Architects, Building Owners, And Authorities”,7, 46, (2003) [Google Scholar]
  2. M. Bruneau, “Innovations in Earthquake Resistant Steel Structures”, Ninth Canadian Conference on Engineering, Ottawa, Ontario, Canada,66, (2007) [Google Scholar]
  3. S. Brzev, “Earthquake Resistant Confined Masonry Construction”, British Columbia Institute of Technology, Burnaby (Canada),7, (2003) [Google Scholar]
  4. E. F. Castillo, M. A. Cruchaga, “Experimental Vibration Analysis for a 3D Scaled Model of a Three Floor Steel Structure”, Universidad de Santiago de Chile, (2012) [Google Scholar]
  5. G.P. Chandradhara, “Structural and Architectural Aspect of Earthquake Resistant Design”, S.J. College of Engineering, Mysore, 7-11, (2018) [Google Scholar]
  6. J. A. Cooper, “Design Consideration for Earthquake Resistant Structures”, N. Z. Portland Cement Association, Wellington, New Zealand, (1999) [Google Scholar]
  7. A.J. Crewe, W.E Daniell, “IDEERS- An International Competition to Design Earthquake Resistant Model Buildings”, 13th World Conference on Earthquake Engineering, Vancouver, Canada, 214,8-12, (2004) [Google Scholar]
  8. A. D. Mohammad, A.R. Dar, A. Qureshi, J. Raju, “A Study on Earthquake Resistant Construction Techniques”, (2003) [Google Scholar]
  9. IAEE Manual, “General Concepts of Earthquake Resistant Design” Chapter No. 3, (2005) [Google Scholar]
  10. Indian Standards, “Criteria for Earthquake Resistant Design of Structures”, Fifth Revision,24-3,24-4. (2002) [Google Scholar]
  11. IRIS Animations, “Seismic Wave Behaviour- Effect on Buildings”,1, 2. (1999) [Google Scholar]
  12. J.R Kayal., “Seismic Waves and Earthquake Location”, Geological Survey of India, Kolkata,1-4. (2006) [Google Scholar]
  13. N. K. Akhtar, M. Javed, “Response Spectrum Modal Analysis”, University of Engineering and Technology, Peshawar, Pakistan, (2013) [Google Scholar]
  14. C.V.R. Murt, “IIITK-BMTPC Earthquake Tips: Learning Earthquake Design and Construction”, Indian Institute of Technology, Kanpur. (2005) [Google Scholar]
  15. H. Nishimura and A. Kojima, “Seismic Isolation Control of a Building Like Structure” 0272-1708/99/1999 IEEE Control System. (1999) [Google Scholar]
  16. C. R. Durgesh, “Future Trends in Earthquake Resistant Design of Structures”, University of Rorkee,1291-92,1298-99. (2000) [Google Scholar]
  17. D. Sherpa, “Affordable Solution for Earthquake Resistant Building in Haiti”, Southern Alberta Institute of Technology, Calgary, Alberta,5-10. (2010) [Google Scholar]
  18. D. Shahsavaria, B. Karamia, “Damped vibration of a graphene sheet using a higher-order nonlocal strain-gradient Kirchhoff plate model” ScienceDirect, Comptes Rendus Mecanique. (2018) [Google Scholar]
  19. E. M. Güneyisi & A. H. Deringöl, Seismic response of friction damped and base-isolated frames considering serviceability limit state. Journal of Constructional Steel Research, 148, 639–657. (2018) [CrossRef] [Google Scholar]
  20. A. Malhotra, T. Roy, & V. Matsagar, Effectiveness of Friction Dampers in Seismic and Wind Response Control of Connected Adjacent Steel Buildings. Shock and Vibration,1–21. (2020) [Google Scholar]
  21. V. A. Matsagar, & R. S. Jangid, Influence of isolator characteristics on the response of base-isolated structures. Engineering Structures, 26(12), 1735–1749. (2004) [CrossRef] [Google Scholar]
  22. A. V. Bhaskararao, & R. S. Jangid, Seismic analysis of structures connected with friction dampers. Engineering Structures, 28(5), 690–703. (2006) [CrossRef] [Google Scholar]
  23. Y. Nakamura, & K. Okada, Review on seismic isolation and response control methods of buildings in Japan. Geo-environmental Disasters, 6(1). (2019) [Google Scholar]
  24. T., Peng, xin, Y.-N., Chen, Y., Chen, C., He, Wang, H. Super-strong and tough poly (vinyl alcohol)/poly(acrylic acid) hydrogels reinforced by hydrogen bonding. Journal of Materials Chemistry B. (2018) [Google Scholar]
  25. T. Cheng-an, Z. Hao, W. Fang, Z. Hui, Z. Xiaorong,W. Jianfang. Mechanical Properties of Graphene Oxide/Polyvinyl Alcohol Composite Film. Polymers and Polymer Composites;25(1):11-16, (2017) [CrossRef] [Google Scholar]
  26. J. He & L. Zhang (2018). Polyvinyl alcohol grafted poly (acrylic acid) as water-soluble binder with enhanced adhesion capability and electrochemical performances for Si anode. Journal of Alloys and Compounds, 763, 228–240 [CrossRef] [Google Scholar]
  27. S., Park, S., Ji, Y., Yoon, S. K., Kim, W., Song, S., Myung. Fabrication of fanlike L-shaped graphene nanostructures with enhanced thermal/electrochemical properties via laser irradiation. Carbon, 182, 691–699, (2021) [CrossRef] [Google Scholar]
  28. S., Maravi, A. K., Bajpai, & J. Bajpai, Poly (vinyl alcohol) supported thermally reduced graphene oxide (TRGO) nanosheets exhibit enhanced electrical and mechanical behavior. Nanostructures & Nano-Objects, 14, 73–83. (2018) [CrossRef] [Google Scholar]
  29. A. Y., Lee, K., Yang, N. D., Anh, C., Park, S. M., Lee, T. G., Lee, & M. S., Jeong, Raman study of D* band in graphene oxide and its correlation with reduction. Applied Surface Science, 536, 147990. (2021) [CrossRef] [Google Scholar]
  30. E., Dervishi, Z., Ji, H., Htoon, M., Sykora, & S. Doorn. Raman Spectroscopy of Bottom-Up Synthesized Graphene Quantum Dots: Size and Structure Dependence. Nanoscale. (2019) [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.