Open Access
Issue |
E3S Web of Conf.
Volume 410, 2023
XXVI International Scientific Conference “Construction the Formation of Living Environment” (FORM-2023)
|
|
---|---|---|
Article Number | 02032 | |
Number of page(s) | 8 | |
Section | Reliability of Buildings and Constructions | |
DOI | https://doi.org/10.1051/e3sconf/202341002032 | |
Published online | 09 August 2023 |
- V. N. Derkach, “Strength of normal adhesion of cement mortars in masonry”, J. Engineering and Construction Journal 7, pp. 6-13 (2012). [Google Scholar]
- G. I. Greenfeld, A. P. Kharchenko, “Comparative tests of masonry fragments from autoclaved aerated concrete with various designs of masonry seam”, J. Housing construction 11, pp. 30-34 (2013). [Google Scholar]
- V. N. Derkach, “Strength and deformability of stone masonry made of cellular concrete blocks of autoclave hardening with polyurethane joints. Part 1. Strength and deformability under compression”, J. Building Materials 5, pp. 29-32 (2017). [Google Scholar]
- V. N. Derkach, “Strength and deformability of stone masonry made of cellular concrete blocks of autoclave hardening with polyurethane joints. Part 2. Bending tensile strength”, J. Building Materials 7, pp. 30-33 (2017). [Google Scholar]
- V. N. Derkach, “Strength and deformability of stone masonry made of cellular concrete blocks of autoclave hardening with polyurethane joints. Part 3. Strength and deformability at shear”, J. Building Materials 8, pp. 32-35 (2017). [Google Scholar]
- A. I. Bedov, T. A. Shchepetyeva, 2008 Design of stone and reinforced stone structures (Publishing house of the ACB, Moscow, 2008), 239 p. [Google Scholar]
- V. I. Pestsov, K. A. Otsokov, V. P. Vylegzhanin, “The effectiveness of the use of cellular concrete blocks in the construction of Russia”, J. Building materials 3, pp. 14-18 (2004). [Google Scholar]
- Ya. M. Paplavskis, P. V. Ewing, A. I. Silezsky, “Prerequisites for further development of production and application of cellular concrete in modern conditions”, J. Building Materials 3, pp. 21-23 (1996). [Google Scholar]
- E. V. Sosnovsky, G. S. Galuzo, “Strength and transverse deformations of gas-silicate concrete under tension by splitting”, J. Concrete and reinforced concrete 8, pp. 11-12 (1987). [Google Scholar]
- L. V. Sokolovsky, N. P. Sazhnev, N. K. Sheleg, “Production and application of autoclave-hardened cellular concrete in the Republic of Belarus”, J. Building Materials 12, pp. 21-23 (2005). [Google Scholar]
- T. Schoch, “Construction of a nearly zero energy with AAC under different European climate conditions” (Germany) 5th International Conference on Autoclaved Aerated Concrete (Bydgoszcz, Poland, 2011), pp. 639-666. [Google Scholar]
- S. Lu, M. Kasa, E. Habian, “Innovation on masonry glued with on-site PU-adhesive” 8th International Masonry Conference (Dresden, 2010), pp. 224-228. [Google Scholar]
- M. Graubohm, W. Brameshuber, “Investigation on the gluing of masonry units with polyurethane adhesive” 8th International Masonry Conference (Dresden, 2010), pp. 371-376. [Google Scholar]
- A. V. Granovsky, B. K. Dzhamuev, “Tests of wall structures made of cellular concrete blocks for seismic effects” Modern production of autoclaved aerated concrete: Collection of reports of a scientific and practical conference (St. Petersburg, 2011), pp. 104-108. [Google Scholar]
- A. V. Granovsky, B. K. Dzhamuev, A. A. Vishnevsky, G. I. Grinfeld, “Experimental determination of normal and tangential adhesion of masonry from aerated concrete blocks of autoclave hardening on various adhesive compositions”, J. Building Materials 8, pp. 22-25 (2015). [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.