Open Access
| Issue |
E3S Web of Conf.
Volume 410, 2023
XXVI International Scientific Conference “Construction the Formation of Living Environment” (FORM-2023)
|
|
|---|---|---|
| Article Number | 02034 | |
| Number of page(s) | 10 | |
| Section | Reliability of Buildings and Constructions | |
| DOI | https://doi.org/10.1051/e3sconf/202341002034 | |
| Published online | 09 August 2023 | |
- R.P. Johnson, Composite Structures of Steel and Concrete: Beams, slabs, columns and frames for buildings, Blackwell Publishing (2004) [CrossRef] [Google Scholar]
- D. Arévalo, L. Hernández, Ch. Gómez, G.Velasteguí, E.Guaminga, R.Baquero, R. Dibujés, Structural performance of steel angle shear connectors with different orientation, in Case Studies in Construction Materials, 14 (2021) [Google Scholar]
- S.J. Hicks, Development of a new push test for Eurocode 4, in Composite construction in steel and concrete VIII, American Institute of Steel Construction (2017) [Google Scholar]
- EN 1994–1. Design of composite steel and concrete structures - Part 1-1: General rules and rules for buildings (2009) [Google Scholar]
- St. Ernst, R. Q. Bridge, A. Wheeler, Correlation of Beam Tests with Pushout Tests in Steel-Concrete Composite Beams, in Journal of structural engineering, February (2010) [Google Scholar]
- G.P. Tonkikh D.A. Chesnokov The influence of the shear connectors ductility on the seismic resistance of composite steel-concrete floors (2021) [Google Scholar]
- SP 266.1325800.2016 Composite structures. Design rules, (2019) [Google Scholar]
- D.V. Konin, A.S. Krylov, D.A. Chesnokov, Estimation of the powder-actuated shear connectors tests, in Structural Mechanics and Analysis of Constructions, 2, (2021) [Google Scholar]
- G.P.Tonkih, D.A. Chesnokov, Fire resistace of shear connectors for cоmposite beams, in Building and reconstruction, 6 (92) (2020) [Google Scholar]
- G.P.Tonkih, D.A.Chesnokov, Calculation resistance of nailed shear connectors in composite beams with decking, in Promyshlennoe i grazhdanskoe stroitel’stvo 7 (2022) [Google Scholar]
- K. Peleska, Partial connection of steel and concrete composite beams with shear connectors, in Proceeding of the Conference Eurosteel, Prague (1999) [Google Scholar]
- F. Eggert, Einfluss der Verdübelung auf das Trag- und Verformungsverhalten von Verbundträgern mit und ohne Profilblech, PhD thesis, Stuttgart, (2019) [Google Scholar]
- N. Gluhović, Behaviour of shear connections realised by connectors fastened with cartridge red pins, PhD thesis, Belgrade (2019) [Google Scholar]
- М. Konrad, Structural behaviour of headed studs with trapezoidal profiled sheeting. PhD thesis, Stuttgart. - 246 p. (2011) [Google Scholar]
- O. Mirza, Uy B, Krezo S. Experimental studies on the behaviour of headed stud shear connectors for composite steel concrete beams under elevated temperatures, in Advances in Steel and Aluminum Structures, Malaysia (2011) [Google Scholar]
- ETA-15/0876. European Technical Assessment for Nailed Shear Connector X-HVB. (2021) [Google Scholar]
- STO ARSS 11251254.001-018-03 Design of fire protection of load-bearing steel structures with the use of various types of cladding (2018) [Google Scholar]
- GOST R 53295-2009 Fire retardant compositions for steel constructions. General requirement. Method for determining fire retardant efficiency (2009) [Google Scholar]
- GOST 24045-2016 Steel sheet clad-formed sections with trapezoidal corrugations for building specifications (2020) [Google Scholar]
- GOST R 57837-2017 Hot-rolled steel I-beams with parallel edges of flanges. Specifications (2018) [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.