Open Access
Issue
E3S Web of Conf.
Volume 410, 2023
XXVI International Scientific Conference “Construction the Formation of Living Environment” (FORM-2023)
Article Number 02046
Number of page(s) 7
Section Reliability of Buildings and Constructions
DOI https://doi.org/10.1051/e3sconf/202341002046
Published online 09 August 2023
  1. Veletsos, A.S. Effect of Inelastic Behavior on the Response of Simple Systems to Earthquake Motion // Proc. Second World Conf. Eathq. Engrg. – Japan, Tokio and Kioto. – 895-912. [Google Scholar]
  2. Veletsos, A.S.; Newmark, N.M.; Chelapati, C.V. Deformation Spectra for Elastic and Elastoplastic Systems Subjected to Ground Shock and Earthquake Motions. In Proceedings of the Third World Conference on Earthquake Engineering, Auckland and Wellington, New Zealand, 22 January–1 February 1965; Volume II, pp. 663–682 [Google Scholar]
  3. R. Eligehausen, R. Mallée; and J. Silva, Anchorage in Concrete Construction (Ernst und Sohn, 2012), ISBN 9783433011430. [CrossRef] [Google Scholar]
  4. M.S. Hoehler, P. Mahrenholtz, and R. Eligehausen, “Behavior of Anchors in Concrete at Seismic-Relevant Loading Rates”, in ACI Structural Journal, 108, pp. 238–247 (2011). [Google Scholar]
  5. P. Mahrenholtz, “Experimental Performance and Recommendations for Qualification of Post-Installed Anchors for Seismic Applications”, Ph.D. thesis, IWB University, 2012. [Google Scholar]
  6. E. Shafei, and S. Tariverdilo. “Seismic Pullout Behavior of Cast-in-Place Anchor Bolts Embedded in Plain Concrete: Damage Plasticity Based Analysis”, in Structures, 34, pp. 479–486, (2021), doi: 10.1016/j.istruc.2021.07.085. [CrossRef] [Google Scholar]
  7. EOTA Technical Report TR049 Post-installed fasteners in concrete under seismic actions. European Organisation for Technical Assessment, 2016. [Google Scholar]
  8. ETAG 001 Guideline for European Technical Approval of Metal Anchors for Use in Concrete Annex E. European Organisation for Technical Approvals, 2012. [Google Scholar]
  9. AC 308 Post-installed Adhesive Anchors in Concrete Elements. ICC-ES, 2015. [Google Scholar]
  10. ACI 355.4-19 Qualification of Post-Installed Adhesive Anchors in Concrete. American Concrete Institute, 2019. [Google Scholar]
  11. M.S. Hoehler, “Behavior and Testing of Fastening to Concrete for Use in Seismic Applications”, Ph.D. thesis, IWB University, 2006. [Google Scholar]
  12. Franchi, A.; Rosati, G.; Cattaneo, S.; Crespi, P.; Muciaccia, G. “Experimental investigation on post-installed metal anchors subjected to seismic loading in R/C members”, in Studi e ricerche - Politecnico di Milano. Scuola di specializzazione in construzioni in cemento armato, 29, (2009) [Google Scholar]
  13. Fuchs, W., Eligehausen, R. and Breen, J. E. “Concrete Capacity Design (CCD) approach for fastening to concrete”, in ACI Structural Journal, 92, p. 73-94 (1995). [Google Scholar]
  14. Nuti, C.; Santini, S. “Fastening technique in seismic areas: A critical review.”, in Proceeding of the Conference on Tailor Made Concrete Structures, p. 899-905, Roma (2008). [Google Scholar]
  15. A. Perelmuter, and O. Kabantsev, “On Conceptual Provisions of Design Standards for Earthquake-Resistant Construction.”, in Vestnik MGSU, 15, p. 1684, (2020), doi: 10.22227/1997-0935.2020.12.1673-1684. [Google Scholar]
  16. Federal Emergency Management Agency FEMA 273. NEHRP Guidelines for the Seismic Rehabilitation of Buildings. [Google Scholar]
  17. Standardinform Russian State Standard GOST 24379.1-2012 Foundation Bolts. Structure and Dimensions. [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.