Open Access
Issue |
E3S Web of Conf.
Volume 410, 2023
XXVI International Scientific Conference “Construction the Formation of Living Environment” (FORM-2023)
|
|
---|---|---|
Article Number | 03003 | |
Number of page(s) | 8 | |
Section | Modelling and Mechanics of Building Structures | |
DOI | https://doi.org/10.1051/e3sconf/202341003003 | |
Published online | 09 August 2023 |
- M. Gordini, M. R. Habibi*, M. H. Tavana, M. Amiri, M. T. Roudsari, Influence of Member Length Imperfection on the Capacity of Spatial Structures, The Open Civil Engineering Journal, 12 (2018). [Google Scholar]
- Z. Zhou, J. Wu and S. Meng, Influence of member geometric imperfection on geometrically nonlinear buckling and seismic performance of suspen-dome structures, International Journal of Structural Stability and Dynamics, 14, 3 (2014). [Google Scholar]
- Zhong-Wei Zhao, Hai-Qing Liu, Bing Liang, and Ren-Zhang Yan, Influence of random geometrical imperfection of stability of singer-layer reticulated domes with semi-rigid connection, Advanced Steel Construction, 15, 1 (2019). [Google Scholar]
- Adnan Ibrahimbegovic, Emina Hajdo and Samir Dolarevic, Linear instability or buckling problems for mechanical and coupled thermomechanical extreme conditions, Coupled Systems Mechanics, Vol. 2, No. 4, 349-374 (2013). [CrossRef] [Google Scholar]
- Gebrail B,, Rasim T,, Yusuf C. T., Analyses of Truss Structures under Thermal Effects, Recent Advances in Civil Engineering and Mechanics (2014). [Google Scholar]
- W. Sun and Y -X. Yuan, Optimization Theory and Methods - Nonlinear Programming, Springer (2006). [Google Scholar]
- Bertsekas D. P., Constrained optimization and Lagrange multiplier method, Academic Press, Inc. (1982). [Google Scholar]
- Vu Thi Bich Quyen, Dao Ngoc Tien,, Nguyen Thi Lan Huong, Mixed Finite Element Method for Geometrically Nonlinear Buckling Analysis of Truss with Member Length Imperfection, IOP Conf. Series: Materials Science and Engineering 960 (2020). [Google Scholar]
- Vu Thi Bich Quyen, Dao Ngoc Tien, Nguyen Thi Lan Huong, Geometrically nonlinear buckling analysis of truss under mechanical and thermal load based on mixed finite element formulation, IOP Conf. Series: Materials Science and Engineering 962 (2020). [Google Scholar]
- Vu Thi Bich Quyen, Dao Ngoc Tien, Tran Thi Thuy Van, Hybrid Finite Element Formulation for Geometrically Nonlinear Buckling Analysis of Truss System Under Mechanical and Thermal Load, Lecture Notes in Civil Engineering, 189 (2022) [Google Scholar]
- Vu Thi Bich Quyen, Dao Ngoc Tien, Hybrid finite element formulation for geometrically nonlinear buckling analysis of truss with initial length imperfection, E3S Web of Conferences 281 (2021). [Google Scholar]
- Manish Agrawal, Arup Nandy, C.S. Jog, A hybrid finite element formulation for large-deformation contact mechanics, Computer Methods in Applied Mechanics and Engineering, 356, 1 (2019) [CrossRef] [Google Scholar]
- Naotake Noda, Richard B. Hetnarski, Yoshinobu Tanigawa, Thermal stresses, Taylor & Francis Group, (2003) [Google Scholar]
- 16. M. A. Crisfield, Nonlinear Finite Element Analysis of Solids and Structures, John Wiley & Sons Ltd. (1997). [Google Scholar]
- Crisfield, M. A., “A Fast Incremental/Iterative Solution Procedure That Handles Snap-Through,” Comput. Struct., 13(1–3), pp. 55–62 (1981). Ritto-Correa M. & Camotim D., On the Arc-Length and Other Quadratic Control Methods: Established, Less Known and New Implementation Procedures, Comput. Struct., 86(11–12), pp. 1353–1368, (2008). [CrossRef] [Google Scholar]
- Ritto-Correa M. & Camotim D., On the Arc-Length and Other Quadratic Control Methods: Established, Less Known and New Implementation Procedures, Comput. Struct., 86(11–12), pp. 1353–1368, (2008). [CrossRef] [Google Scholar]
- W. F. J Lam & C. T. Morley, “Arc-Length Method for Passing Limit Points in Structural Calculation,” J. Struct. Eng., 118(1), pp. 169–185, (1992). [CrossRef] [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.