Open Access
Issue |
E3S Web Conf.
Volume 413, 2023
XVI International Scientific and Practical Conference “State and Prospects for the Development of Agribusiness - INTERAGROMASH 2023”
|
|
---|---|---|
Article Number | 02009 | |
Number of page(s) | 8 | |
Section | Agricultural Engineering and Mechanization | |
DOI | https://doi.org/10.1051/e3sconf/202341302009 | |
Published online | 11 August 2023 |
- A. M. Sajeeb, C. S. Babu,M. M. Arif, “Evaluation ofMechanicalProperties ofNatural Fiber Reinforced Melamine Urea Formaldehyde(MUF) Resin Composites,” in Materials Today: Proceedings, 5(2), 6764–6769 (2018) doi:10.1016/j.matpr.2017.11.335. [CrossRef] [Google Scholar]
- A. Dorieh et al., “Areviewofrecent progress in melamine-formaldehyde resin based nanocomposites as coatingmaterials,” Progress in Organic Coatings, 165 (2022) doi: 10.1016/j.porgcoat.2022.106768. [CrossRef] [Google Scholar]
- A. Antunes et al., “Highlyflexible glycol-urea-formaldehyde resins,” Eur Polym J, 105, 167–176 (2018) doi: 10.1016/j.eurpolymj.2018.05.037. [CrossRef] [Google Scholar]
- B. Jeong, B. D. Park, V. Causin, Influence of synthesis method and melamine content of urea-melamine-formaldehyde resins to their features in cohesion, interphase, and adhesion performance, Journal of Industrial and Engineering Chemistry, 79, 87–96 (2019) doi: 10.1016/j.jiec.2019.05.017. [Google Scholar]
- Azarov V. I., Polymers in the production of wood materials: textbook, Moscow, Bauman Moscow State Technical University, 236 (2003) ISBN 5-8135-0168-1.”. [Google Scholar]
- O. P. Machneva, V. E. Tsvetkov, M. Y. Ekimova, Polyatomic alcohols as urea– formaldehyde resin modifiers, Polymer Science, Series D., 12, 15-18 (2018) DOI 10.31044/1813-7008-2018-0-12-15-18. – EDN YRACHB [Google Scholar]
- M. Y. Ekimova, V. E. Tsvetkov, O. P. Machneva, Aminoformaldehyde oligomers modified with salts of polyfunctional acids, Polymer Science, Series D., 6, 37-40 (2020) DOI 10.31044/1813-7008-2020-0-6-37-40. –EDN VEKYYU. [Google Scholar]
- M. Gonçalves, N. T. Paiva, J. M. Ferra, J. Martins, F. D. Magalhães, L. Carvalho, Chemical composition of melamine-urea-formaldehyde (MUF) resins assessed by near-infrared (NIR) spectroscopy, Int J Adhes Adhes, 93 (2019) doi: 10.1016/j.ijadhadh.2019.01.021. [Google Scholar]
- C. Kamoun, A. Pizzi, and M. Zanetti, Upgrading Melamine-Urea-Formaldehyde Polycondensation Resins with Buffering Additives. I. The Effect of Hexamine Sulfate and Its Limits (2003) [Google Scholar]
- S. Jahromi, The storage stability of melamine formaldehyde resin solutions: III. Storage at elevated temperatures [Google Scholar]
- L. G. Plotkin, Technology and equipment for impregnation paper with polymers. 2nd ed., revised, Moscow, Forestry Industry, 120 (1985) [Google Scholar]
- A. A. Nikitin, S. P. Trishin, Technology of finishing board materials. Laboratory practical work: teaching aid (2016) [Google Scholar]
- V. E. Tsvetkov, A. E. Anokhin, M. Y. Ekimova, O. P. Machneva, The Effect of Paper Type on the Impregnation and Lamination of Wooden Boards Polymer Science -Series D, 15(3), 342-348 (2022) DOI 10.1134/S1995421222030315 [Google Scholar]
- M. Yu. Zueva, Laminating chipboard with textured papers impregnated with melamine-urea-formaldehyde oligomers: thesis, Cand. Sc. (Eng.).: 05.21.05 Moscow, 217 (2012) [Google Scholar]
- M. A. Ivankin, Veneering of wood-based panel materials with urea-melamine-formaldehyde resin films: thesis. Cand. Sc. (Eng.): 05.21.05, 168 (2005) [Google Scholar]
- T. Vyacheslav Efimovich, Perfect technologies and finishes of wood-based panel materials, Vestnik MGUL, Forest Bulletin, 1 (1997) [Google Scholar]
- V. E. Tsvetkov, Influence of melamine amount on synthesis and properties of modified impregnated oligomers. [Google Scholar]
- V. E. Tsvetkov, M. Zueva, P. Yu, The study of the effect of surface-active additives on the surface tension of modified impregnating oligomers // Bulletin of MSUL -Forestry Bulletin, 5 (2011) [Google Scholar]
- M. Y. Ekimova, Salts of tartaric acid as modifiers of amino-formaldehyde resins [Google Scholar]
- O. P. Machneva, M. Yu. Ekimova, R. I. Viklov, D. S. Duzhakov, Impregnating resins for the production of laminated chipboard, Scientific and Technical Conference of the Bauman Moscow State Technical University: Abstracts, Mytishchi, June 01-30, 2017. -Mytishchi: Limited Liability Company 'Scientific-Innovation Center', 144-146 (2017) [Google Scholar]
- V.E. Tsvetkov, M.Y. Zueva, O.P. Machneva, Patent No 2535226 C1 Russian Federation, IPC C08G 12/38, C08G 12/40, C08G 12/32. Method of making impregnating oligomers : No. 2013119171/05 : application. 25.04.2013: publ. 10.12.2014 [Google Scholar]
- V. E. Tsvetkov, A. S. Pasko, A. A. Tesovsky, O. P. Machneva, Y. A. Semochkin, Features of decorative paper laminates based on melamine-formaldehyde resins, Construction materials, 7 (2016) [Google Scholar]
- V. E. Tsvetkov, A. A. Tesovskiy, Decorative paper-layered plastics based on amino resins, Science without Borders, 1(6) (2017) [Google Scholar]
- D. V. Kruglov, A. A. Nikitin, S. P. Trishin, Comparative assessment of the suitability of wood board materials for short-stroke laminating, MSUL Vestnik, Lesnoy vestnik, 5 (2011) [Google Scholar]
- M. Y. Ekimova, E. A. Teslenko, O. P. Machneva, O. V. Shevelev, The study of the influence of technological factors on the properties of laminated chipboard, Proceedings of Tula State University. Technical Sciences, 7, 279-288 (2019) [Google Scholar]
- M. Y. Ekimova, Thermodynamic properties of impregnated melamine-urea-formaldehyde oligomers, Proceedings of Tula State University, Technical Sciences, 7 (2019) [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.