Open Access
Issue |
E3S Web Conf.
Volume 413, 2023
XVI International Scientific and Practical Conference “State and Prospects for the Development of Agribusiness - INTERAGROMASH 2023”
|
|
---|---|---|
Article Number | 02047 | |
Number of page(s) | 10 | |
Section | Agricultural Engineering and Mechanization | |
DOI | https://doi.org/10.1051/e3sconf/202341302047 | |
Published online | 11 August 2023 |
- S. A. Freint, A. T. Rybak, Energy-saving technologies for testing large and medium-capacity hydraulic machines, Engineering science and education, 1 (2016) [Google Scholar]
- M. V. Ustyantsev, Dynamics of the three-mass electromechanical drive system of the volumetric hydraulic transmission test bench, Transport 2011: sat. tr. International scientific and practical conference, RGUPS, Rostov n/A, 1, 353-355 (2011) [Google Scholar]
- A. T. Rybak, A. Yu. Pelipenko, S. A. Freint, Modeling of a hydro-mechanical system of a test bench with energy recovery. "Mechanics, equipment, materials and technologies". Proceedings of the international scientific and practical conference, "Kuban State Technological University", March 29 - 30, Krasnodar, 178 – 182 (2018) [Google Scholar]
- A. T. Rybak, A. Yu. Pelipenko, M. Yu. Nevzorova. A. R. Zenin, Modeling and investigation of the dynamics of the drive of the test bench of reciprocating hydraulic machines. Dynamics of technical systems "DTS-2018": Proceedings of the XIV International Scientific and Technical Conference (Rostov-on-Don, September 12-14, Don State Technical University – Rostov, n/A: DSTU, 68-72 (2018) [Google Scholar]
- P. V. Petrov, A. A. Koeva , V. A. Tselishchev, Generalized analysis of the dynamic characteristics of an electric hydraulic booster. Bulletin of the Ufa State Aviation Technical University, 18(3), 40-47 (2014). [Google Scholar]
- V. A. Milyutkin, V. Buxmann, O. Polushkin, Further Improvement and Adaptation of the Primera DMC Seeder, Germany, XIV International Scientific Conference “Interagromash 2021". Precision Agriculture and Agricultural Machinery Industry, 1 : Precision Agriculture and Agricultural Machinery Industry, 130-137 (2021) [Google Scholar]
- S. V. Nosachev, Using the simintech dynamic modeling environment to build and check the operation of automation systems, MATEC Web of Conferences 2018, 226, 04003 (2018) [Google Scholar]
- B. A. Kartashov, O. S. Kozlov, E. A. Shabaev, Environment of dynamic modeling of SimInTech technical systems, Moscow: DMK-Press, 424 (2017) [Google Scholar]
- A. M. Bazhenov, Mathematical modeling of working processes of a volumetric piston hybrid energy machine with a step-type slot seal, Bulletin of Mechanical Engineering.. 2, 55-60 (2019) [Google Scholar]
- V. S. Shcherbakov, Modeling of the hydropneumatic impact device of the active working body of the excavator, Construction and road vehicles, 7, 19-23 (2019) [Google Scholar]
- V. Yu. Ermakov, Method of mathematical modeling of pneumohydraulic systems of automatic spacecraft taking into account the phenomenon of water hammer in the fuel lines of low-thrust propulsion systems, Cosmonautics and rocket engineering, 3(108), 100-106 (2019) [Google Scholar]
- A. T. Rybak , R. Gorbunov, A. Olshevskaya, N. Ugrekhelidze, M. Egyan, Mathematical model of a throttle flow divider with an elastic regulating element. XIV International Scientific Conference “Interagromash 2021". Precision Agriculture and Agricultural Machinery Industry. Cep. "Lecture Notes in Networks and Systems" Rostov-on-Don. (2022) [Google Scholar]
- A. Altybaev, B. Ch. Meskhi, A. Mozgovoy, A. Olshevskaya, System approach to research processes of technological adjustment of machine and tractor units, IOP Conference Series: Earth and Environmental Science. Cep. "Fundamental and Applied Scientific Research in the Development of Agriculture in the Far East, AFE 2021 - Papers" (2021) [Google Scholar]
- B. Meskhi, V. Bondarenko, I. Efremenko, V. Larionov, D. Rudoy, Olshevskaya A, Technical, technological and managerial solutions in ensuring environmental safety. IOP Conference Series: Materials Science and Engineering. Cep. "International Scientific and Practical Conference Environmental Risks and Safety in Mechanical Engineering, ERSME 2020" (2020) [Google Scholar]
- V. A. Milyutkin , A. Miliutkin, A. Mozgovoy , D. Rudoy , T. Maltseva , V. Chigvintsev, Innovative technologies for the efficient use of UAN liquid fertilizers: production, logistics and application in case of lack of moisture and global warming. Networked control systems for connected and automated vehicles. Volume 1. Proceedings of the International Conference, 509, Zlin (2023) [Google Scholar]
- V. Milyutkin, V. Buxmann, O. Polushkin, D. Rudoi, A. Olshevskaya, Further improvement and adaptation of the Primera DMC seeder, Germany. XIV international scientific conference “Interagromash 2021". Precision agriculture and agricultural machinery industry, Precision Agriculture and Agricultural Machinery Industry. Cep. "Lecture Notes in Networks and Systems", 246 (2022) [Google Scholar]
- V. Pakhomov, S. Braginets, O. Bakhchevnikov, D. Rudoi ., Results of experimental studies of pneumatic threshing of ears with subsequent separation of fractions. XIV international scientific conference “Interagromash 2021". Precision agriculture and agricultural machinery industry, Precision Agriculture and Agricultural Machinery Industry. Cep. "Lecture Notes in Networks and Systems", 246 (2022) [Google Scholar]
- I. A. Panfilov, A. N. Soloviev , A. A. Matrosov , B. Ch. Meskhi, O. O. Polushkin, D. V. Rudoy, V. I. Pakhomov, Finite element simulation of airflow in a field cleaner, IOP conference series: materials science and engineering. International Scientific and Practical Conference Environmental Risks and Safety in Mechanical Engineering, ERSME 2020" 1001 (2020) [Google Scholar]
- L. Sobenko, B. Pimenta, A. Camargo, A. Robaina, M. Peiter, J. Frizzone, Indicators for evaluation of model performance: irrigation hydraulics applications. Acta Scientiarum Agronomy, 45 (2022)10.4025/actasciagron.v45i1.56300 [Google Scholar]
- C. Kefei, A mathematical modeling in applying hydraulic element method for a hydraulic buffer and its performance analysis, 186 (2023) 10.1016/j.anucene.2023.109754. [Google Scholar]
- D. Li, N. Dai, H. Wang, F. Zhang, Mathematical Modeling Study of Pressure Loss in the Flow Channels of Additive Manufacturing Aviation Hydraulic Valves. Energies, 16 (2023)1788. 10.3390/en16041788 [Google Scholar]
- D. Ugwuanyi, J. Enem, U. Juliet, Mathematical Modeling of the Effect of Cut-Off in Controlling Seepage beneath Hydraulic Structures. East African Scholars Journal of Engineering and Computer Sciences, 5, 77-80 (2022) 10.36349/easjecs.2022.v05i05.003. [CrossRef] [Google Scholar]
- M. Bureš, Z. Fiber, J. Charvát, M. Svoboda, P. Richtr, J. Pocedič, J. Kosek, P. Mazúr, A. Zubov, Mathematical modeling of electric and hydraulic resistances of reconstructed carbon felt electrodes using micro-computed tomography. Chemical Engineering Journal, 458, 141424 (2023) 10.1016/j.cej.2023.141424 [CrossRef] [Google Scholar]
- S. Semenov, D. Kulakov, Mathematical modeling of the mechanisms of volumetric hydraulic machines. IOP Conference Series: Materials Science and Engineering, 492. 012042. 10.1088/1757-899X/492/1/012042. (2019) [CrossRef] [Google Scholar]
- P. Allahverdipour, M. Sattari, M. Soil, W. Modeling, Comparing the performance of the multiple linear regression classic method and modern data mining methods in annual rainfall modeling (Case study: Ahvaz city), 3, 125-142 (2023) 10.22098/mmws.2022.11337.1120 [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.