Open Access
Issue |
E3S Web Conf.
Volume 413, 2023
XVI International Scientific and Practical Conference “State and Prospects for the Development of Agribusiness - INTERAGROMASH 2023”
|
|
---|---|---|
Article Number | 02050 | |
Number of page(s) | 9 | |
Section | Agricultural Engineering and Mechanization | |
DOI | https://doi.org/10.1051/e3sconf/202341302050 | |
Published online | 11 August 2023 |
- B. Michelberger, D. Jaitner, A. Hagel, P. Striemann, B. Kröger, A. Lasagni, Combined measurement and simulation of piston ring cylinder liner contacts with a reciprocating long-stroke tribometer, Tribology International, 163(4), 107146 (2021) DOI: 10.1016/j.triboint.2021.107146 [CrossRef] [Google Scholar]
- V. Macián, B. Tormos, V. Bermúdez, S. Bastidas, Development of a floating liner test rig and lubrication model for the study of the piston compression ring friction force under fully flooded and starved lubrication, Tribology International, 160, 107034 (2021) DOI: 10.1016/j.triboint.2021.107034 [CrossRef] [Google Scholar]
- A. Zavos, P. G. Nikolakopoulos, Tribology of new thin compression ring of fired engine under controlled conditions-A combined experimental and numerical study, Tribology International, 28(C), 214-230 (2018) DOI: 10.1016/j.triboint.2018.07.034 [CrossRef] [Google Scholar]
- I. G. Goryacheva, Contact problem in the presence of wear for the ring embedded in the cylinder. Applied mathematics and mechanics, 44(2), 363-367 (1980) [CrossRef] [Google Scholar]
- L. Gao, Y. Cui, Z. Xu, Y. Fu, S. Liu, Y. Li, X. Hou, A fully coupled tribo-dynamic model for piston-ring-liner system, Tribology International, 178(A), 107998 (2023) https://doi.org/10.1016/j.triboint.2022.107998. [CrossRef] [Google Scholar]
- L. Zhang, H. Wang, D. Liu, Q. Zhang, W. Guo, N. Yang, J. Xu, S. Fu, B. Yang, S. Liu, S. Zhou, Research on wear detection mechanism of cylinder liner-piston ring based on energy dissipation and AE, Wear, 508–509, 204472 (2022) doi.org/10.1016/j.wear.2022.204472. [CrossRef] [Google Scholar]
- S. Dahdah, N. Biboulet, A. Lubrecht, P. Charles, Scuffing initiation caused by local starvation in a piston ring cylinder liner contact, Tribology International, 172, 107616 (2022) https://doi.org/10.1016/j.triboint.2022.107616. [CrossRef] [Google Scholar]
- R. Rahmani, H. Rahnejat, B. Fitzsimons, D. Dowson, The effect of cylinder liner operating temperature on frictional loss and engine emissions in piston ring conjunction, Applied Energy, 191, 568-581 (2017) https://doi.org/10.1016/j.apenergy.2017.01.098. [Google Scholar]
- Y. Xu, Q. Zheng, J. Geng, Y. Dong, M. Tian, L. Yao, K. D. Dearn, Synergistic effects of electroless piston ring coatings and nano-additives in oil on the friction and wear of a piston ring/cylinder liner pair, Wear, 422–423, 201-211 (2019) https://doi.org/10.1016/j.wear.2019.01.064. [CrossRef] [Google Scholar]
- B. Michelberger, D. Jaitner, A. Hagel , P. Striemann , B. Kröger, F.-J. Wetzel, A. Leson, A. Fabián Lasagni, Friction Response of Piston Rings for Application-like Starvation and Benefit of Amorphous Carbon Coatings. Coatings, 12, 738 (2022) https://doi.org/10.3390/coatings12060738. [CrossRef] [Google Scholar]
- P. Venkateswara, I. Syed, S. BenBeera, Experimental investigation on effects of positive texturing on friction and wear reduction of piston ring/cylinder liner system, Materials Today: Proceedings, 24(2), 1112-1121 (2020) https://doi.org/10.1016/j.matpr.2020.04.424. [CrossRef] [Google Scholar]
- A. S. Patil, U. M. Shirsat, Effect of laser textured dimples on tribological behavior of piston ring and cylinder liner contact at varying load, Materials Today: Proceedings, 44(1), 1005-1020 (2021) https://doi.org/10.1016/j.matpr.2020.11.172. [CrossRef] [Google Scholar]
- V. V. Alisin, Improving the wear resistance of cylinder liners for heavy diesel engines by laser treatment, Transport, mining and construction engineering: science and production, 16, 51-55 (2022) https://doi.org/10.26160/2658-3305-2022-16-51-55 [Google Scholar]
- H. Liu, Q. Gao, J. Dai, P. Chen, W. Gao, J. Hao, H. Yang, Microstructure and high-temperature wear behavior of CoCrFeNiWx high-entropy alloy coatings fabricated by laser cladding, Tribology International, 172, 107574 (2022) https://doi.org/10.1016/j.triboint.2022.107574 [CrossRef] [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.