EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 427 (2023) E3S Web Conf., 427 (2023) 01004 References
Open Access
Issue
E3S Web Conf.
Volume 427, 2023
International Conference on Geotechnical Engineering and Energetic-Iraq (ICGEE 2023)
Article Number 01004
Number of page(s) 8
Section Development in Geotechnical Engineering
DOI https://doi.org/10.1051/e3sconf/202342701004
Published online 13 September 2023
  1. Jha A.K., Sivapullaiah P. Unpredictable behaviour of gypseous/gypsiferous soil: An overview. Indian Geotechnical Journal. 2017;47(1):503–520. [CrossRef] [Google Scholar]
  2. Al-Zabedy S., Al-Kifae A. Controlling collapsibility potential by improving Iraqi gypseous soils subsidence: A Review study. IOP Conference Series: Materials Science and Engineering; 2020. [Google Scholar]
  3. Schanz T., Karim H.H., editors. Geotechnical characteristics of some Iraqi gypseous soils. MATEC Web of Conferences; EDP Sciences. 2018. [Google Scholar]
  4. Al-Saoudi N., Al-Khafaji A., Al-Mosawi M. Challenging problems of gypseous soils in Iraq. Proceedings of the 18th International Conference on Soil Mechanics and Geotechnical Engineering; Presses des Ponts Paris. 2013. [Google Scholar]
  5. Aude S.A., Mahmood N.S., Sulaiman S.O., Abdullah H.H., Al Ansari N. Slope Stability And Soil Liquefaction Analysis Of Earth Dams With A Proposed Method Of Geotextile Reinforcement. GEOMATE Journal. 2022;22(94):102–112. [Google Scholar]
  6. Rao S., Revanasiddappa K. Collapse behaviour of a residual soil. Géotechnique. 2002;52(4):259–268. [CrossRef] [Google Scholar]
  7. Li P., Vanapalli S., Li T. Review of collapse triggering mechanism of collapsible soils due to wetting. Journal of Rock Mechanics and Geotechnical Engineering. 2016;8(2):256–274. [CrossRef] [Google Scholar]
  8. Abdulkareem A.H., Eyada S.O., Mahmood N.S. Improvement of a subgrade soil by using EarthZyme and cement kiln dust waste. Archives of Civil Engineering. 2021;67(2). [Google Scholar]
  9. Karkush M.O., Almurshedi A.D., Karim H.H. Investigation of the Impacts of Nanomaterials on the Micromechanical Properties of Gypseous Soils. Arabian Journal for Science and Engineering. 2023;48(1):665–675. [CrossRef] [Google Scholar]
  10. Jawad Y., Jabbar M.A. Effect of compaction on the behaviour of Kirkuk gypseous soil. Journal of Engineering. 2014;13(4):1–20. [Google Scholar]
  11. Al-Murshedi A.D., Karkush M.O., Karim H.H., editors. Collapsibility and shear strength of gypseous soil improved by nano silica fume [NSF]. Key Engineering Materials, Trans Tech Publ. 2020. [Google Scholar]
  12. Bagriaçik B., Güner E.D. An experimental investigation of reinforcement thickness of improved clay soil with drinking water treatment sludge as an additive. KSCE Journal of Civil Engineering. 2020;24(12):3619–3627. [CrossRef] [Google Scholar]
  13. Shah S.A.R., Mahmood Z., Nisar A., Aamir M., Farid A., Waseem M. Compaction performance analysis of alum sludge waste modified soil. Construction and Building Materials. 2020;230(1):116953. [CrossRef] [Google Scholar]
  14. ASTM-D2216. Standard test method for laboratory determination of water [moisture] content of soil and rock by mass. American Society for Testing and Material. 1998. [Google Scholar]
  15. ASTM-D854. Standard test methods for specific gravity of soil solids by water pycnometer,. American Society for Testing and Material. 2010. [Google Scholar]
  16. ASTM-D1557. Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Modified Effort [56,000 Ft-lbf/ft3 [2,700 KN-m/m3]] 1: American Society for Testing and Material. 2009. [Google Scholar]
  17. ASTM- D4254. Standard Test Methods for Minimum Index Density and Unit Weight of Soils and Calculation of Relative Density, American Society for Testing and Materials. 2000. [Google Scholar]
  18. ASTM-D1556. Standard test method for density and unit weight of soil in place by sand-cone method, American Society for Testing and Material. 2015. [Google Scholar]
  19. ASTM- D422. Standard Test Method for Particle-Size Analysis of Soils, ASTM International, West Conshohocken, PA doi. 2007. [Google Scholar]
  20. ASTM-D2974. Standard test methods for moisture, ash, and organic matter of peat and other organic soils, American Society for Testing and Material. 2007. [Google Scholar]
  21. British Standard Institution, Methods of Test for Soils for Civil Engineering Purposes. 1990. [Google Scholar]
  22. ASTM-D6276. Standard test method for using pH to estimate the soil-lime proportion requirement for soil stabilization, West Conshohocken PA: ASTM International. 1999. [Google Scholar]
  23. ASTM-D4318. Standard Test Methods for Liquid Limit, Plastic Limit, and Plasticity Index of Soils, ASTM International, West Conshohocken, P.A., USA. 2010. [Google Scholar]
  24. Boscov M.E., Tsugawa J.K., Montalvan E.L. Beneficial use of water treatment sludge in geotechnical applications as a sustainable alternative to preserve natural soils. Sustainability. 2021;13(17):9848. [CrossRef] [Google Scholar]
  25. ASTM-D5333. Standard test method for measurement of collapse potential of soils, Annual Book of ASTM Standards, 04.08, [Philadelphia]. 2003. [Google Scholar]
  26. Salman R. Bearing capacity of shallow footing on compacted filling dune sand over reinforced gypseous soil. Journal of Engineering. 2013;19(5):532–542. [Google Scholar]
  27. Budania R., Arora R., Singhvi B., Veerwal H.K. Experimental study of rectangular footing resting over geo- grid reinforced sand. Development. 2017. [Google Scholar]
  28. AbdulRahman S., Fattah M., Ihsan E. Influence of plastic fiber on the geotechnical properties of gypseous soil. International Journal of Engineering. 2021;34(2):367–374. [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.