EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 427 (2023) E3S Web Conf., 427 (2023) 02009 References
Open Access
Issue
E3S Web Conf.
Volume 427, 2023
International Conference on Geotechnical Engineering and Energetic-Iraq (ICGEE 2023)
Article Number 02009
Number of page(s) 8
Section Structural Engineering and Construction
DOI https://doi.org/10.1051/e3sconf/202342702009
Published online 13 September 2023
  1. P. Chindaprasirt and U. Rattanasak. Shrinkage behavior of structural foam lightweight concrete containing glycol compounds and fly ash Mater. Des. 2011; 32(2): 723–727. [Google Scholar]
  2. H. Awang, Z. S. Aljoumaily, and N. Noordin. The Mechanical Properties of Foamed Concrete containing Un-processed Blast Furnace Sla BSFMEC 2014; 4: 1–9. [Google Scholar]
  3. Y. H. M. Amran, N. Farzadnia, and A. A. A. Ali. Properties and applications of foamed concrete, a review. Constr. Build. Mater. 2015; 101: 990–1005. [CrossRef] [Google Scholar]
  4. S.F. Ahmed and M. Hashmath. Experimental Investigation of Strength Characteristics of Foam Concrete. Int. J. Adv. Technol. Innov. Res. 2017; 09(09): 1385–1389. [Google Scholar]
  5. E. K. K. Nambiar and K. Ramamurthy. Air-void characterisation of foam concrete. Cem. Concr. Res. 2007; 37: 221–230. [CrossRef] [Google Scholar]
  6. A. A. Hilal, N. H. Thom, and A. R. Dawson. On entrained pore size distribution of foamed concrete. Constr. Build. Mater. 2015; 75(1): 227–233. [CrossRef] [Google Scholar]
  7. K. Ramamurthy, E. K. Kunhanandan Nambiar, and G. Indu Siva Ranjani. A classification of studies on properties of foam concrete. Cem. Concr. Compos. 2009; 31(6): 388–396. [CrossRef] [Google Scholar]
  8. M. R. Jones and A. Mccarthy. Preliminary views on the potential of foamed concrete as a structural material. Mag. Concr. Res. 2005; 1(1): 21–31. [CrossRef] [Google Scholar]
  9. E. K. K. Nambiar and K. Ramamurthy. Shrinkage Behavior of Foam Concrete. J.Mater. Civ. Eng. 2009; 26(1): 58–61. [Google Scholar]
  10. A. Tanveer, K. Jagdeesh, and F. Ahmed. Foam Concrete. Int. J. Civ. Eng. Res. 2017; 8(1): 1–14. [Google Scholar]
  11. V. B. Mohammed, S. M. Hama and K. I. Aziz. Assessment Strength Properties of Modified Reactive Powder Concrete by Adding Waste Bricks. 12th International Conference on Developments in eSystems Engineering (DeSE), Kazan, Russia 2019. [Google Scholar]
  12. T. A. Mahmood, A. A. Hilal, and I. Al-jumaili. Effect of sand Replacement by silica sand on strength of fibers reinforced foamed concrete. DeSE Conf. 2019. [Google Scholar]
  13. K. Ramamurthy, E. K. K. Nambiar, and G. I. S. Ranjani. Cement & Concrete Composites A classification of studies on properties of foam concrete. Cem. Concr. Compos. 2009; 31(6): 388–396. [CrossRef] [Google Scholar]
  14. A. Just and B. Middendorf. Microstructure of high-strength foam concrete. Mater. Charact. 2009; 60(7): 741–748. [CrossRef] [Google Scholar]
  15. Y. H. M. Amran, N. Farzadnia, and A. A. A. Ali. Properties and applications of foamed concrete; a review Constr. Build. Mater. 2015; 101(1): 990–1005. [CrossRef] [Google Scholar]
  16. Iraqi Specification No.5. Portland Cement. The Cement Agency for Standardization and Quality Control, Baghdad, 1984. [Google Scholar]
  17. Iraqi specification No.45. Aggregate from natural sources for concrete. Central Agency for Standardization and Quality Control, Planning Council, Baghdad, Iraq, translated from Arabic edition. 1986. [Google Scholar]
  18. R.C. Valore Jr. Cellular concretes Part 2 physical properties. ACI J. Proc. 50 (6). 1954. [Google Scholar]
  19. A. A. Hilal. Properties and Microstructure of Pre-formed Foamed Concretes. PhD Thises. no. February, 2015. [Google Scholar]
  20. E. K. K. Nambiar, K. Ramamurthy, and M. Asce. Fresh State Characteristics of Foam Concrete. J. Mater. Civ. Eng. 2008; 20(2): 111–117. [CrossRef] [Google Scholar]
  21. National Standards Authority of Ireland (NSAI). Testing hardened concrete - Part 3: Compressive strength of test specimens. Irish Standard, 2009. IS EN 12390-3. [Google Scholar]
  22. ASTM C496/C496M-17 (2017) Standard Test Method for Splitting Tensile Strength of Cylindrical Concrete Specimens. ASTM International, West Conshohocken, PA. [Google Scholar]
  23. ASTM C78/C78M-15a (2015) Standard Test Method for Flexural Strength of Concrete. ASTM International, West Conshohocken, PA 40. [Google Scholar]
  24. Nambiar, E.K. Kunhanandan, and K. Ramamurthy. "Influence of filler type on the properties of foam concrete. Cement and concrete composites. 2006; 28(5): 475–480. [CrossRef] [Google Scholar]
  25. Lim, Siong Kang, et al. Strength and toughness of lightweight foamed concrete with different sand grading. KSCE Journal of Civil Engineering. 2015; 19(1): 2191–2197. [CrossRef] [Google Scholar]
  26. E. K. K. Nambiar, K. Ramamurthy, and M. Asce. Fresh State Characteristics of Foam Concrete. Journal of Materials in Civil Engineering. 2008; 20(2): 111–117. [CrossRef] [Google Scholar]
  27. N. Narayanan and K. Ramamurthy. Structure and properties of aerated concrete: a review. Cem. Concr. Compos. 2000; 22(1): 321–329. [CrossRef] [Google Scholar]
  28. S. K. Lim, C. S. Tan, X. Zhao, and T. C. Ling. Strength and toughness of lightweight foamed concrete with different sand grading. KSCE J. Civ. Eng. 2014; 19(7): 2191–2197. [Google Scholar]
  29. T. A. Mahmood. Proprties of fiber-reinforced reactive powder foamed concrete Master thesis Univ. Anbar. 2019. [Google Scholar]
  30. C. Lian, Y. Zhuge, and S. Beecham. The relationship between porosity and strength for porous concrete. Constr. Build. Mater. 2011; 25(11): 4294–4298. [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.