Open Access
| Issue |
E3S Web Conf.
Volume 429, 2023
The Third International Conference of Construction, Infrastructure, and Materials (ICCIM 2023)
|
|
|---|---|---|
| Article Number | 05001 | |
| Number of page(s) | 11 | |
| Section | Structural Engineering and Materials | |
| DOI | https://doi.org/10.1051/e3sconf/202342905001 | |
| Published online | 20 September 2023 | |
- W.O. Nugroho, A. Sagara, I. Imran, Structures 41, 1092-1108 (2022) https://doi.org/10.1016/j.istruc.2022.05.032 [CrossRef] [Google Scholar]
- I.W. Sengara, F. Aldiamar, E3S Web Conf. 331, 07009 (2021) https://doi.org/10.1051/e3sconf/202133107009 [CrossRef] [EDP Sciences] [Google Scholar]
- American Society of Civil Engineering, Minimum design load for building and other structures (ASCE 7-16) [Google Scholar]
- American Society of Civil Engineering, Seismic evaluation and retrofit of the existing building (ASCE 41, 2017) [Google Scholar]
- Japan Building Disaster Prevention Association, Standard for seismic evaluation of existing reinforced concrete buildings, Guidelines for seismic retrofit of existing reinforced concrete buildings, and technical manual for seismic evaluation and seismic retrofit of existing reinforced building (JBDPA, 2001) [Google Scholar]
- Directorate General of Human Settlements, Directorate of Investigation of Building Problems, Regulation Indonesia earthquake resistant planning for buildings (PPTGIUG, 1983) [Google Scholar]
- American Concrete Institute, Report on methods for estimating in place concrete strength (ACI 228.1R-19) [Google Scholar]
- ASTM International, Standard test method for rebound number of hardened concrete (ASTM C805-13a, 2013) [Google Scholar]
- Ministry of Public Works, Design guidelines for reinforced concrete and reinforced wall structures for houses and buildings (SKBI 2.3.53.1987/UDC 693.55.693.25, 1987) [Google Scholar]
- National Standardization Agency of Indonesia, Earthquake resistance design procedures for building and non-building structures (SNI 1726:2019) [Google Scholar]
- F.M. Bartlett, J.G. MacGregor, ACI Materials Journal 93(2), 158-168 (1996) DOI: 10.14359/1353 [Google Scholar]
- American Concrete Institute, Guide for obtaining cored and interpreting compressive strength result (ACI 214.4R-10) [Google Scholar]
- Y. Nakajima, M. Seki, H. Suga, R. Islam, Proposal of a new detail evaluation method based on Japanese and American evaluation standards for the existing RC buildings, in The 17th World Conference on Earthquake Engineering, 3a-0001 (2020) [Google Scholar]
- Y. Ishiyama, Introduction to earthquake engineering and seismic codes in the world, in International Institute Seismology and Earthquake Engineering (IISEE) Course Lecture Notes, Building Research Institute (BRI), Japan (2023) [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.