Open Access
Issue |
E3S Web Conf.
Volume 430, 2023
15th International Conference on Materials Processing and Characterization (ICMPC 2023)
|
|
---|---|---|
Article Number | 01017 | |
Number of page(s) | 8 | |
DOI | https://doi.org/10.1051/e3sconf/202343001017 | |
Published online | 06 October 2023 |
- Naveen Kumar Gupta, Arun Kumar Tiwari, Subrata Kumar Ghosh, Experimental Study of Thermal Performance of Nanofluid Filled and Nanoparticles Coated Mesh Wick Heat Pipes, Journal of Heat Transfer Copyright VC 2018 by ASME OCTOBER 2018, Vol. 140/102403-1 [Google Scholar]
- Roberto Bubbico, Francesco D'Annibale, Barbara Mazzarotta, Carla Menale, Analysis of Passive Temperature Control Systems Using Phase Change Materials for Application to Secondary Batteries Cooling, Journal of Thermal Science and Engineering Applications DECEMBER 2018, Vol. 10/061009-1 [Google Scholar]
- Dr JS, B. Raut, B. Saurabh “Gawande Thermal Performance of Screen Mesh Wick Heat Pipe Using CuO. Global Engineering Research Journal (IERJ), Volume 2 Issue 9 Page 4052-4056, 2017 ISSN 2395-1621” [Google Scholar]
- G. Anderson,C.Taran, Md. T Abaneh, “High-Heat-Flux(>50 W/cm2)Hybrid Constant Conductance Heat Pipes”,48 th International Conference On Environmental Systems,8-12 July 2018”. [Google Scholar]
- Ah. Shaheed, M. Mahdi, M. Famouri, “Transient Analysis round and hollow Heat pipe considering Different Wick Structures. Proceedings of ASME 2016 Heat Transfer Summer Conference HT2016, Washington, DC,USA”. [Google Scholar]
- J. Patel, DV Diman, “Experimental examination of Heat Transfer Enhancement of Heat Pipe Using Silver/Water Nanofluid, University Journal of Research Vol. 01, Issue 01 and 02 (2015-16) ISSN No: 0002 69” [Google Scholar]
- Shamura R, Putra I, Juarsa, “Characteristics of screen work wick heat pipe with nano-fluid as latent cooling system. Atom indonesia vol.39 No.1 (2013) 24-31”. [CrossRef] [Google Scholar]
- Y Lee, R Yang, 2011, “Characterisation of Hybrid mischievous copper heat pipe. Proceedings ASME/JSME 2011 eighth Thermal Engineering Joint Conference AJTEC2011 March 13-17, 2011, AJTEC2011-44088” [Google Scholar]
- Sateesh, N., Devakar Reddy, S., Subbiah, R., Siva Nagaraju, D., Nookaraju, B. Processing parameters Optimization of Injection Moulding in DN20 Vent of Water Meter Manufacturing, 2020, E3S Web of Conferences, 184, 1008. [Google Scholar]
- Sateesh, N., Subbiah, R., Nookaraju, B., Lakshmi, A.A., Prashanth kumar, P. Analysis on effect of nanofluid on process parameters in machining of EN19 steel, Advances in Materials and Processing Technologiesthis link is disabled, 2022, 8(sup3), pp. 1757–1767 [CrossRef] [Google Scholar]
- Sateesh, N., Subbiah, R., Nookaraju, B.C., Siva Nagaraju, D. “Achieving safety and weight reduction in automobiles with the application of composite material“ Materials Today: Proceedings, 2022, 62, pp. 4469–4472 [CrossRef] [Google Scholar]
- Pavan, C., Sateesh, N., Subbiah, R. Taguchi analysis on machinability of Inconel 600 using Copper, Brass, and Copper tungsten electrodes in EDM, 2019, Materials Today: Proceedings, 46, 9281-9286. [Google Scholar]
- Chenneswari, P., Sateesh, N., Ram Subbiah, Pavan, C. Optimization of machining process parameters in Al 7175 metal matrix composites using Taguchi method, 2019, Materials Today: Proceedings, 46, 9673-9676 [Google Scholar]
- Deepika, D., Anitha Lakshmi, A., Srinivasa Rao, Ch., Sateesh, N., Nookaraju, B.Ch., Subbiah, R., Evaluation and optimization of material properties of tailor welded Al 6061 alloy and ASS 304 sheets using Taguchi robust design, 2021, Materials Today: Proceedings, 46, 746-751. [CrossRef] [Google Scholar]
- Lakshmi, A.A., Ch, S.R., Sateesh, N., Subbiah, R. “Implementation of taguchi approach on investigation of formability for Al 8011 sheets at elevated temperatures” Advances in Materials and Processing Technologies this link is disabled, 2022, 8(sup2), pp. 619–634 [CrossRef] [Google Scholar]
- Sateesh, N., Sampath Rao, P., Ravishanker, D.V., Satyanarayana, K. “Effect of Moisture on GFRP Composite Materials(2015), Materials Today: Proceedings”, 2 (4-5), pp. 2902-2908 [CrossRef] [Google Scholar]
- Siva Rama Krishna, L., Mahesh, N., Sateesh, N. “Topology optimization using solid isotropic material with penalization technique for additive manufacturing”,(2017) Materials Today: Proceedings, 4 (2), pp. 1414-1422 [CrossRef] [Google Scholar]
- Manikonda, R.D., Kosaraju, S., Raj, K.A., Sateesh, N. “Wear Behavior Analysis of Silica Carbide Based Aluminum Metal Matrix Composites” (2018) Materials Today: Proceedings, 5 (9), pp. 20104-2010 [CrossRef] [Google Scholar]
- Kosaraju, S., Vijay Kumar, M., Sateesh, N. “Optimization of Machining Parameter in Turning Inconel 625”, (2018) Materials Today: Proceedings, 5 (2), pp. 5343-5348 [CrossRef] [Google Scholar]
- Kale, A., Singh, S.K., Sateesh, N., Subbiah, R. “A review on abrasive water jet machining process and its process parameters” (2019) Materials Today: Proceedings, 26, pp. 1032-1036 [Google Scholar]
- Haribalaji, V., Boopathi, S., Asif, M.M., Jeyakumar, M., Subbiah, R., Lewise, K.A.S. “Influences of Friction stir tool parameters for joining two similar AZ61A alloy plates” (2021) Materials Today: Proceedings, 50, pp. 2547-2553 [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.