EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 430 (2023) E3S Web Conf., 430 (2023) 01105 References
Open Access
Issue
E3S Web Conf.
Volume 430, 2023
15th International Conference on Materials Processing and Characterization (ICMPC 2023)
Article Number 01105
Number of page(s) 11
DOI https://doi.org/10.1051/e3sconf/202343001105
Published online 06 October 2023
  1. Singh, Mrityunjay, Tatsuki Ohji, and Rajiv Asthana, eds. Green and sustainable manufacturing of advanced material. Elsevier, 2015. [Google Scholar]
  2. He, Xu, Xiaojuan Shi, Christopher Chung, Zepeng Lei, Wei Zhang, and Kai Yu. “A sustainable manufacturing method of thermoset composites based on covalent adaptable network polymers.” Composites Part B: Engineering 221 (2021): 109004. [CrossRef] [Google Scholar]
  3. Dumée, Ludovic F. “Circular materials and circular design—review on challenges towards sustainable manufacturing and recycling.” Circular Economy and Sustainability 2, no. 1 (2022): 9-23. [CrossRef] [PubMed] [Google Scholar]
  4. Chyr, Gloria, and Joseph M. DeSimone. “Review of high-performance sustainable polymers in additive manufacturing.” Green Chemistry (2023). [Google Scholar]
  5. Zhou, Yingwu, Guoqiang Gong, Yuanjun Huang, Chi Chen, Dongsheng Huang, Ziqian Chen, and Menghuan Guo. “Feasibility of incorporating recycled fine aggregate in high performance green lightweight engineered cementitious composites.” Journal of Cleaner Production 280 (2021): 124445. [CrossRef] [Google Scholar]
  6. Vinoth, S., G. Kanimozhi, K. Hari Prasad, Kumar Harish, E. S. Srinadhu, and N. Satyanarayana. “Enhanced ionic conductivity of electrospun nanocomposite (PVDF-HFP+ TiO2 nanofibers fillers) polymer fibrous membrane electrolyte for DSSC application.” Polymer Composites 40, no. 4 (2019): 1585-1594. [CrossRef] [Google Scholar]
  7. Farina, Ilenia, Narinder Singh, Francesco Colangelo, Raimondo Luciano, Giulio Bonazzi, and Fernando Fraternali. “High-performance nylon-6 sustainable filaments for additive manufacturing.” Materials 12, no. 23 (2019): 3955. [CrossRef] [PubMed] [Google Scholar]
  8. Chauhan, Rahulsinh B., Tejas V. Shah, Deepali H. Shah, Tulsi J. Gohil, Ankit D. Oza, Brijesh Jajal, and Kuldeep K. Saxena. “An overview of image processing for dental diagnosis.” Innovation and Emerging Technologies 10 (2023): 2330001. [CrossRef] [Google Scholar]
  9. Basavapoornima, Ch, T. Maheswari, C. R. Kesavulu, W. Pecharapa, J. Kaewkhao, and C. K. Jayasankar. “Spectral characteristics of Pr3+-doped lead phosphate glasses for optical display device and gain media applications.” In AIP Conference Proceedings, vol. 2279, no. 1. AIP Publishing, 2020. [Google Scholar]
  10. Wu, Hao, Lihua Zheng, Jing Zhan, Ning Du, Wenjun Liu, Jie Ma, Liwei Su, and Lianbang Wang. “Recycling silicon-based industrial waste as sustainable sources of Si/SiO2 composites for high-performance Li-ion battery anodes.” Journal of Power Sources 449 (2020): 227513. [CrossRef] [Google Scholar]
  11. Singh, Satbir, Vivek Agrawal, KULDEEP K. SAXENA, and Kahtan A. Mohammed. “Optimization on Manufacturing Processes at Indian Industries Using TOPSIS.” Indian Journal of Engineering and Materials Sciences (IJEMS) 30, no. 1 (2023): 32-44. [Google Scholar]
  12. Ballout, W., N. Sallem-Idrissi, M. Sclavons, C. Doneux, C. Bailly, T. Pardoen, and P. Van Velthem. “High performance recycled CFRP composites based on reused carbon fabrics through sustainable mild solvolysis route.” Scientific Reports 12, no. 1 (2022): 5928. [CrossRef] [PubMed] [Google Scholar]
  13. Lin, Leyu, Yuxiao Zhao, Yao Xu, Chong Sun, and Alois K. Schlarb. “Advanced recycled carbon fiber (rCF) reinforced PEEK composites–excellent alternatives for high-performance tribomaterials.” Materials Today Sustainability 20 (2022): 100227. [CrossRef] [Google Scholar]
  14. Hao, Liang, David Raymond, Giovanni Strano, and Sasan Dadbakhsh. “Enhancing the sustainability of additive manufacturing.” In 5th international conference on responsive manufacturing-green manufacturing (ICRM 2010), pp. 390-395. IET, 2010. [Google Scholar]
  15. Singh, Bharat, Indradeep Kumar, Kuldeep K. Saxena, Kahtan A. Mohammed, M. Ijaz Khan, Sana Ben Moussa, and Sherzod Shukhratovich Abdullaev. “A future prospects and current scenario of aluminium metal matrix composites characteristics.” Alexandria Engineering Journal 76 (2023): 1-17. [CrossRef] [Google Scholar]
  16. Mohanty, Amar K., Singaravelu Vivekanandhan, Jean-Mathieu Pin, and Manjusri Misra. “Composites from renewable and sustainable resources: Challenges and innovations.” Science 362, no. 6414 (2018): 536-542. [CrossRef] [PubMed] [Google Scholar]
  17. Pon, V. Doni, KS Joseph Wilson, K. Hariprasad, V. Ganesh, H. Elhosiny Ali, H. Algarni, and I. S. Yahia. “Enhancement of optoelectronic properties of ZnO thin films by Al doping for photodetector applications.” Superlattices and Microstructures 151 (2021): 106790. [CrossRef] [Google Scholar]
  18. Zhang, Yuxin, Zhen Zhang, Alan M. Wemyss, Chaoying Wan, Yongtao Liu, Pan Song, and Shifeng Wang. “Effective thermal-oxidative reclamation of waste tire rubbers for producing high-performance rubber composites.” ACS Sustainable Chemistry & Engineering 8, no. 24 (2020): 9079-9087. [CrossRef] [Google Scholar]
  19. Sonawane, Jayesh M., Abhishek Yadav, Prakash C. Ghosh, and Samuel B. Adeloju. “Recent advances in the development and utilization of modern anode materials for high performance microbial fuel cells.” Biosensors and bioelectronics 90 (2017): 558-576. [CrossRef] [Google Scholar]
  20. Makul, Natt, Roman Fediuk, Mugahed Amran, Abdullah M. Zeyad, Gunasekaran Murali, Nikolai Vatin, Sergey Klyuev, Togay Ozbakkaloglu, and Yuriy Vasilev. “Use of recycled concrete aggregates in production of green cement-based concrete composites: A review.” Crystals 11, no. 3 (2021): 232. [CrossRef] [Google Scholar]
  21. Koumoulos, Elias P., Aikaterini-Flora Trompeta, Raquel-Miriam Santos, Marta Martins, Cláudio Monterio dos Santos, Vanessa Iglesias, Robert Böhm et al. “Research and development in carbon fibers and advanced high-performance composites supply chain in Europe: a roadmap for challenges and the industrial uptake.” Journal of Composites Science 3, no. 3 (2019): 86. [CrossRef] [Google Scholar]
  22. Kumari, Ch Usha, A. Sampath Dakshina Murthy, B. Lakshmi Prasanna, M. Pala Prasad Reddy, and Asisa Kumar Panigrahy. “An automated detection of heart arrhythmias using machine learning technique: SVM.” Materials Today: Proceedings 45 (2021): 1393-1398. [CrossRef] [Google Scholar]
  23. Embia, Granville, Bikash Ranjan Moharana, Aezeden Mohamed, Kamalakanta Muduli, and Noorhafiza Binti Muhammad. “3D Printing Pathways for Sustainable Manufacturing.” In New Horizons for Industry 4.0 in Modern Business, pp. 253-272. Cham: Springer International Publishing, 2023. [CrossRef] [Google Scholar]
  24. Aravindan, Parthasarathi, Federico Becagli, Marco L. Longana, Lourens G. Blok, Thomas R. Pozegic, Samantha J. Huntley, Thomas Rendall, and Ian Hamerton. “Remanufacturing of woven carbon fibre fabric production waste into high performance aligned discontinuous fibre composites.” Journal of Composites Science 4, no. 2 (2020): 68. [CrossRef] [Google Scholar]
  25. Korpi, Alireza Grayeli, Ştefan Ţălu, Mirosław Bramowicz, Ali Arman, Sławomir Kulesza, Bartosz Pszczolkowski, Stanislav Jurečka et al. “Minkowski functional characterization and fractal analysis of surfaces of titanium nitride films.” Materials Research Express 6, no. 8 (2019): 086463. [CrossRef] [Google Scholar]
  26. Mahajan, Jignesh S., Robert M. O’Dea, Joanne B. Norris, LaShanda TJ Korley, and Thomas H. Epps III. “Aromatics from lignocellulosic biomass: A platform for high-performance thermosets.” ACS Sustainable Chemistry & Engineering 8, no. 40 (2020): 15072-15096. [CrossRef] [Google Scholar]
  27. Awasthi, Ankita, Akash Gupta, Kuldeep K. Saxena, R. K. Dwivedi, Deepak Kundalkar, Dalael Saad Abdul-Zahra, Abhishek Joshi, and H. S. Saggu. “Design and analysis of equal-channel angular pressing of Al6061: a comparative study.” Advances in Materials and Processing Technologies (2022): 1-10. [Google Scholar]
  28. Bhukya, Muralidhar Nayak, and Venkata Reddy Kota. “A quick and effective MPPT scheme for solar power generation during dynamic weather and partial shaded conditions.” Engineering Science and Technology, an International Journal 22, no. 3 (2019): 869-884. [CrossRef] [Google Scholar]
  29. Meng, Xue, Wei Fan, Yanli Ma, Tongxue Wei, Hao Dou, Xue Yang, Huixia Tian, Yang Yu, Tao Zhang, and Li Gao. “Recycling of denim fabric wastes into high-performance composites using the needle-punching nonwoven fabrication route.” Textile Research Journal 90, no. 5-6 (2020): 695-709. [CrossRef] [Google Scholar]
  30. Kumar, P. Sai Shravan, and K. Viswanath Allamraju. “A review of natural fiber composites [Jute, Sisal, Kenaf].” Materials Today: Proceedings 18 (2019): 2556-2562. [CrossRef] [Google Scholar]
  31. Gupta, Priyanka, Nakul Gupta, and Kuldeep K. Saxena. “Predicting compressive strength of geopolymer concrete using machine learning.” Innovation and Emerging Technologies 10 (2023): 2350003. [CrossRef] [Google Scholar]
  32. Kalpana, G., Puligadda Veereswara Kumar, Shadi Aljawarneh, and R. V. Krishnaiah. “Shifted adaption homomorphism encryption for mobile and cloud learning.” Computers & Electrical Engineering 65 (2018): 178-195. [CrossRef] [Google Scholar]
  33. Khurshid, Muhammad Furqan, Mir Mohammad Badrul Hasan, Simon Hoebel, Anwar Abdkader, and Chokri Cherif. “Uni-directional tape structures consisting of recycled carbon fibres and polyamide 6 fibers for high-performance thermoplastic composites.” In Materials Science Forum, vol. 1063, pp. 133-138. Trans Tech Publications Ltd, 2022. [CrossRef] [Google Scholar]
  34. Wu, Yahe, Yen Wei, and Yan Ji. “Carbon material/vitrimer composites: towards sustainable, functional, and high-performance crosslinked polymeric materials.” Giant (2022): 100136. [Google Scholar]
  35. Feng, Zhili, Stan A. David, Venkata K. Manchiraju, D. Alan Frederick, and Wayne Thomas. “Friction Extrusion: Solid-State Metal Synthesis and Recycling in Sustainable Manufacturing.” JOM (2023): 1-12. [Google Scholar]
  36. Awasthi, Ankita, Kuldeep K. Saxena, and Vanya Arun. “Sustainable and smart metal forming manufacturing process.” Materials Today: Proceedings 44 (2021): 2069-2079. [CrossRef] [Google Scholar]
  37. Kannikachalam, Niranjan Prabhu, Davide di Summa, Ruben P. Borg, Estefania Cuenca, Matteo Parpanesi, Nele De Belie, and Liberato Ferrara. “Assessment of sustainability and self-healing performances of recycled ultra-high-performance concrete.” Materials Journal (2022). [Google Scholar]
  38. Maiti, Saptarshi, Md Rashedul Islam, Mohammad Abbas Uddin, Shaila Afroj, Stephen J. Eichhorn, and Nazmul Karim. “Sustainable fiber-reinforced composites: A Review.” Advanced Sustainable Systems 6, no. 11 (2022): 2200258. [CrossRef] [Google Scholar]
  39. Rybicka, Justyna, Ashutosh Tiwari, Pedro Alvarez Del Campo, and Jack Howarth. “Capturing composites manufacturing waste flows through process mapping.” Journal of Cleaner Production 91 (2015): 251-261. [CrossRef] [Google Scholar]
  40. Raj, I. Loyola Poul, S. Valanarasu, K. Hariprasad, Joice Sophia Ponraj, N. Chidhambaram, V. Ganesh, H. Elhosiny Ali, and Yasmin Khairy. “Enhancement of optoelectronic parameters of Nd-doped ZnO nanowires for photodetector applications.” Optical Materials 109 (2020): 110396. [CrossRef] [Google Scholar]
  41. Sojobi, A. O., and K. M. Liew. “Multi-objective optimization of high performance bio-inspired prefabricated composites for sustainable and resilient construction.” Composite Structures 279 (2022): 114732. [CrossRef] [Google Scholar]
  42. Fang, Yue, Xianrui Shi, Xiang Wang, Zhaoqian Li, Jinpeng Shen, and Chonghua Pei. “Composition Regulation of Free Delignification of Wood Powder toward High Performance, Recyclable Composites.” ACS Sustainable Chemistry & Engineering 10, no. 48 (2022): 15999-16008. [CrossRef] [Google Scholar]
  43. Kumar, Pankaj, Amit Kumar Jain, Jay Prakash Srivastava, Rajan Kumar, Kuldeep K. Saxena, Chander Prakash, and Dharam Buddhi. “Multiphysics Simulation of the Shape Prediction and Material Removal Rate in Electrochemical Machining Process.” Advances in Materials and Processing Technologies (2023): 1-13. [Google Scholar]
  44. Kandhare, Amit D., Prasad A. Thakurdesai, Pralhad Wangikar, and Subhash L. Bodhankar. “A systematic literature review of fenugreek seed toxicity by using ToxRTool: evidence from preclinical and clinical studies.” Heliyon 5, no. 4 (2019). [Google Scholar]
  45. Longana, Marco L., H. Yu, Juhyeong Lee, T. R. Pozegic, Samantha Huntley, Thomas Rendall, K. D. Potter, and Ian Hamerton. “Quasi-isotropic and pseudo-ductile highly aligned discontinuous fibre composites manufactured with the HiPerDiF (High Performance Discontinuous Fibre) technology.” Materials 12, no. 11 (2019): 1794. [CrossRef] [PubMed] [Google Scholar]
  46. Chen, Zhiqiang, Meng Yang, Mengke Ji, Xiao Kuang, H. Jerry Qi, and Tiejun Wang. “Recyclable thermosetting polymers for digital light processing 3D printing.” Materials & Design 197 (2021): 109189. [CrossRef] [Google Scholar]
  47. Stempkowska, Agata, and Tomasz Gawenda. “Special Issue “Mineral Composite Materials Produced with Waste/Recycled Components”—Editorial Note and Critical Review of the Problems.” Materials 16, no. 11 (2023): 3911. [CrossRef] [PubMed] [Google Scholar]
  48. Chen, Guowei, Michael R. Snowdon, Amar K. Mohanty, and Manjusri Misra. “High performance polyphenylene sulfide bio-composites with lightweight and sustainable hybrid fillers: biocarbon and recycled carbon fibers.” Composites Part C: Open Access (2023): 100375. [Google Scholar]
  49. Awasthi, Ankita, Kuldeep K. Saxena, and Vanya Arun. “Sustainability and survivability in manufacturing sector.” In Modern Manufacturing Processes, pp. 205-219. Woodhead Publishing, 2020. [CrossRef] [Google Scholar]
  50. Pimenov, Danil Yu, Mozammel Mia, Munish K. Gupta, Álisson R. Machado, Giuseppe Pintaude, Deepak Rajendra Unune, Navneet Khanna et al. “Resource saving by optimization and machining environments for sustainable manufacturing: A review and future prospects.” Renewable and Sustainable Energy Reviews 166 (2022): 112660. [CrossRef] [Google Scholar]
  51. Lloyd, Evan M., Julian C. Cooper, Peyton Shieh, Douglas G. Ivanoff, Nil A. Parikh, Edgar B. Mejia, Keith EL Husted et al. “Efficient Manufacture, Deconstruction, and Upcycling of High-Performance Thermosets and Composites.” ACS Applied Engineering Materials 1, no. 1 (2022): 477-485. [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.