Open Access
Issue
E3S Web Conf.
Volume 430, 2023
15th International Conference on Materials Processing and Characterization (ICMPC 2023)
Article Number 01115
Number of page(s) 11
DOI https://doi.org/10.1051/e3sconf/202343001115
Published online 06 October 2023
  1. Allison, Bryan, and Anup Pandkar. “Critical factors for determining a first estimate of fatigue limit of bearing steels under rolling contact fatigue.” International Journal of Fatigue 117 (2018): 396-406. [CrossRef] [Google Scholar]
  2. Basavapoornima, C., C. R. Kesavulu, T. Maheswari, W. Pecharapa, S. R. Depuru, and C. K. Jayasankar. 2020. “Spectral Characteristics of Pr3+-doped Lead Based Phosphate Glasses for Optical Display Device Applications.” Journal of Luminescence 228: 117585. [CrossRef] [Google Scholar]
  3. Bhukya, M. N., and V. R. Kota. 2019. “A Quick and Effective MPPT Scheme for Solar Power Generation During Dynamic Weather and Partial Shaded Conditions.” Engineering Science and Technology, an International Journal 22, no. 3: 869-884. [CrossRef] [Google Scholar]
  4. Chakraborty, D., A. Rathi, R. Singh, V. K. Pathak, A. K. Srivastava, A. Sharma, et al. 2023. “External Six-bar Mechanism Rehabilitation Device for Index Finger: Development and Shape Synthesis.” Robotics and Autonomous Systems 161: 104336. [CrossRef] [Google Scholar]
  5. Chauhan, R. B., T. V. Shah, D. H. Shah, T. J. Gohil, A. D. Oza, B. Jajal, and K. K. Saxena. 2023. “An Overview of Image Processing for Dental Diagnosis.” Innovation and Emerging Technologies 10: 2330001. [CrossRef] [Google Scholar]
  6. Dikshit, M. K., S. Singh, V. K. Pathak, K. K. Saxena, M. K. Agrawal, V. Malik, et al. 2023. “Surface Characteristics Optimization of Biocompatible Ti6Al4V with RCCD and NSGA II Using Die Sinking EDM.” Journal of Materials Research and Technology 24: 223-235. [CrossRef] [Google Scholar]
  7. Duan, Yuanyuan, Jorge A. Gonzalez, Pratim A. Kulkarni, William W. Nagy, and Jason A. Griggs. “Fatigue lifetime prediction of a reduced-diameter dental implant system: Numerical and experimental study.” Dental materials 34, no. 9 (2018): 1299-1309. [CrossRef] [PubMed] [Google Scholar]
  8. Awasthi, A., A. Gupta, K. K. Saxena, R. K. Dwivedi, D. Kundalkar, D. S. Abdul-Zahra, et al. 2022. “Design and Analysis of Equal-Channel Angular Pressing of Al6061: A Comparative Study.” Advances in Materials and Processing Technologies: 1-10. [Google Scholar]
  9. Awasthi, A., K. K. Saxena, and V. Arun. 2020. “Sustainability and Survivability in Manufacturing Sector.” In Modern Manufacturing Processes, 205-219. Woodhead Publishing. [Google Scholar]
  10. Awasthi, A., K. K. Saxena, and V. Arun. 2021. “Sustainable and Smart Metal Forming Manufacturing Process.” Materials Today: Proceedings 44: 2069-2079. [CrossRef] [Google Scholar]
  11. Gupta, P., N. Gupta, and K. K. Saxena. 2023. “Predicting Compressive Strength of Geopolymer Concrete Using Machine Learning.” Innovation and Emerging Technologies 10: 2350003. [CrossRef] [Google Scholar]
  12. Hariram, V., J. Godwin John, G. Siva Subramaniam, S. Sooryanarayanan, S. Seralathan, and T. Micha Premkumar. “FEA based approach on replacing the metal cast wheel into thermoset plastic wheel.” Materials Today: Proceedings 33 (2020): 3420-3425. [CrossRef] [Google Scholar]
  13. Kalpana, G., P. V. Kumar, S. Aljawarneh, and R. V. Krishnaiah. 2018. “Shifted Adaption Homomorphism Encryption for Mobile and Cloud Learning.” Computers & Electrical Engineering 65: 178-195. [CrossRef] [Google Scholar]
  14. Kandhare, A. D., P. A. Thakurdesai, P. Wangikar, and S. L. Bodhankar. 2019. “A Systematic Literature Review of Fenugreek Seed Toxicity by Using ToxRTool: Evidence from Preclinical and Clinical Studies.” Heliyon 5, no. 4. [Google Scholar]
  15. Karaduman, Alper, Betül Sultan Yıldız, and Ali Rıza Yıldız. “Experimental and numerical fatigue-based design optimisation of clutch diaphragm spring in the automotive industry.” International Journal of Vehicle Design 80, no. 2-4 (2019): 330-345. [CrossRef] [Google Scholar]
  16. Korpi, A. G., Ş. Ţălu, M. Bramowicz, A. Arman, S. Kulesza, B. Pszczolkowski, et al. 2019. “Minkowski Functional Characterization and Fractal Analysis of Surfaces of Titanium Nitride Films.” Materials Research Express 6, no. 8: 086463. [CrossRef] [Google Scholar]
  17. Kumar, P. S. S., and K. V. Allamraju. 2019. “A Review of Natural Fiber Composites [Jute, Sisal, Kenaf].” Materials Today: Proceedings 18: 2556-2562. [CrossRef] [Google Scholar]
  18. Kumar, P., A. Kumar Jain, J. P. Srivastava, R. Kumar, K. K. Saxena, C. Prakash, and D. Buddhi. 2023. “Multiphysics Simulation of the Shape Prediction and Material Removal Rate in Electrochemical Machining Process.” Advances in Materials and Processing Technologies: 1-13. [Google Scholar]
  19. Kumari, C. U., A. S. D. Murthy, B. L. Prasanna, M. P. P. Reddy, and A. K. Panigrahy. 2021. “An Automated Detection of Heart Arrhythmias Using Machine Learning Technique: SVM.” Materials Today: Proceedings 45: 1393-1398. [CrossRef] [Google Scholar]
  20. Lipiäinen, Kalle, Shahriar Afkhami, Antti Ahola, and Timo Björk. “Evaluation of geometrical notch and quality effects in the fatigue strength assessment of ultra-high-strength steel cut edges.” In Structures, vol. 37, pp. 881-892. Elsevier, 2022. [CrossRef] [Google Scholar]
  21. Manouchehry Nya, Reza, Shahrum Abdullah, and Salvinder Singh Karam Singh. “Reliability-based fatigue life of vehicle spring under random loading.” International Journal of Structural Integrity 10, no. 5 (2019): 737-748. [CrossRef] [Google Scholar]
  22. Manouchehrynia, R., S. Abdullah, S. S. K. Singh, and J. A. F. O. Correia. “Reliability-based fatigue life assessment using random road load condition and local damage criteria.” Engineering Failure Analysis 146 (2023): 107157. [CrossRef] [Google Scholar]
  23. Nair, A., S. Kumanan, C. Prakash, D. G. Mohan, K. K. Sxena, S. Kumar, and G. Kumar. 2023. “Research Developments and Technological Advancements in Conventional and Non-conventional Machining of Superalloys–a Review.” Journal of Adhesion Science and Technology: 1-72. [Google Scholar]
  24. Pon, V. D., K. J. Wilson, K. Hariprasad, V. Ganesh, H. E. Ali, H. Algarni, and I. S. Yahia. 2021. “Enhancement of Optoelectronic Properties of ZnO Thin Films by Al Doping for Photodetector Applications.” Superlattices and Microstructures 151: 106790. [CrossRef] [Google Scholar]
  25. Prateek, Soumy, Rajnish Garg, Kuldeep Kumar Saxena, V. K. Srivastav, Hitesh Vasudev, and Nikhil Kumar. 2023. “Data-driven Materials Science: Application of ML for Predicting Band Gap.” Advances in Materials and Processing Technologies: 1-10. [Google Scholar]
  26. Raj, I. L. P., S. Valanarasu, K. Hariprasad, J. S. Ponraj, N. Chidhambaram, V. Ganesh, et al. 2020. “Enhancement of Optoelectronic Parameters of Nd-doped ZnO Nanowires for Photodetector Applications.” Optical Materials 109: 110396. [CrossRef] [Google Scholar]
  27. Remes, Heikki, Jani Romanoff, Ingrit Lillemäe, Darko Frank, Sami Liinalampi, Pauli Lehto, and Petri Varsta. “Factors affecting the fatigue strength of thin-plates in large structures.” International Journal of Fatigue 101 (2017): 397-407. [CrossRef] [Google Scholar]
  28. Sambasivam, S., A. S. Abed, S. Chopde, P. P. Patil, P. Math, A. Parmar, et al. 2023. “Role of Processing Techniques Related to Mg-MMCs for Biomedical Implantation: An Overview.” Materials Today: Proceedings. [Google Scholar]
  29. Sarkhel, P., M. K. Dikshit, V. K. Pathak, K. K. Saxena, C. Prakash, and D. Buddhi. 2023. “Robust Deflection Control and Analysis of a Fishing Rod-type Flexible Robotic Manipulator for Collaborative Robotics.” Robotics and Autonomous Systems 159: 104293. [CrossRef] [Google Scholar]
  30. Singh, B., I. Kumar, K. K. Saxena, K. A. Mohammed, M. I. Khan, S. B. Moussa, and S. S. Abdullaev. 2023. “A Future Prospects and Current Scenario of Aluminium Metal Matrix Composites Characteristics.” Alexandria Engineering Journal 76: 1-17. [CrossRef] [Google Scholar]
  31. Singh, Harmeet, Gurinder Singh Brar, Harish Kumar, and Vikrant Aggarwal. “A review on metal matrix composite for automobile applications.” Materials Today: Proceedings 43 (2021): 320-325. [CrossRef] [Google Scholar]
  32. Singh, S., V. Agrawal, K. K. SAXENA, and K. A. Mohammed. 2023. “Optimization on Manufacturing Processes at Indian Industries Using TOPSIS.” Indian Journal of Engineering and Materials Sciences (IJEMS) 30, no. 1: 32-44. [Google Scholar]
  33. Vinoth, S., G. Kanimozhi, K. Hari Prasad, K. Harish, E. S. Srinadhu, and N. Satyanarayana. 2019. “Enhanced Ionic Conductivity of Electrospun Nanocomposite (PVDF-HFP+ TiO2 Nanofibers Fillers) Polymer Fibrous Membrane Electrolyte for DSSC Application.” Polymer Composites 40, no. 4: 1585-1594. [CrossRef] [Google Scholar]
  34. Xu, Wentao, Olivier Le Roux de Bretagne, Marzio Grasso, Matthew F. Harrison, Owen Carless, and Chris StLeger-Harris. “On a numerical methodology to assess the fatigue life of connecting rods.” Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering (2023): 09544070231180996. [Google Scholar]
  35. Yang, Guangxue, Shuang Li, and Delong Fu. “Fatigue properties of AL/AL-MG alloy laminated materials for the applications to railway tank cars.” International Journal of Fatigue 122 (2019): 173-183. [CrossRef] [Google Scholar]
  36. Zakaria, K. A., K. A. Kamarudin, M. A. Yusuff, M. B. Ali, and S. Dharmalingam. “Fatigue life simulation of an alloy wheel design.” International Journal of Engineering and Technology (UAE) 7, no. 4 (2018): 81-84. [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.