EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 430 (2023) E3S Web Conf., 430 (2023) 01122 References
Open Access
Issue
E3S Web Conf.
Volume 430, 2023
15th International Conference on Materials Processing and Characterization (ICMPC 2023)
Article Number 01122
Number of page(s) 10
DOI https://doi.org/10.1051/e3sconf/202343001122
Published online 06 October 2023
  1. Basavapoornima, C., C. R. Kesavulu, T. Maheswari, W. Pecharapa, S. R. Depuru, and C. K. Jayasankar. 2020. “Spectral Characteristics of Pr3+-doped Lead Based Phosphate Glasses for Optical Display Device Applications.” Journal of Luminescence 228: 117585. [CrossRef] [Google Scholar]
  2. Basheer, Alfarooq O., Marlia M. Hanafiah, Mohammed Abdulhakim Alsaadi, Wan Zuhairi Wan Yaacob, and Y. Al-Douri. “Synthesis, characterization, and analysis of hybrid carbon nanotubes by chemical vapor deposition: application for aluminum removal.” Polymers 12, no. 6 (2020): 1305. [Google Scholar]
  3. Bhukya, M. N., and V. R. Kota. 2019. “A Quick and Effective MPPT Scheme for Solar Power Generation During Dynamic Weather and Partial Shaded Conditions.” Engineering Science and Technology, an International Journal 22, no. 3: 869-884. [CrossRef] [Google Scholar]
  4. Chadha, Tandeep S., Mengmeng Yang, Kelsey Haddad, Vivek B. Shah, Shuiqing Li, and Pratim Biswas. “Model based prediction of nanostructured thin film morphology in an aerosol chemical vapor deposition process.” Chemical Engineering Journal 310 (2017): 102-113. [CrossRef] [Google Scholar]
  5. Chakraborty, D., A. Rathi, R. Singh, V. K. Pathak, A. K. Srivastava, A. Sharma, et al. 2023. “External Six-bar Mechanism Rehabilitation Device for Index Finger: Development and Shape Synthesis.” Robotics and Autonomous Systems 161: 104336. [CrossRef] [Google Scholar]
  6. Chauhan, R. B., T. V. Shah, D. H. Shah, T. J. Gohil, A. D. Oza, B. Jajal, and K. K. Saxena. 2023. “An Overview of Image Processing for Dental Diagnosis.” Innovation and Emerging Technologies 10: 2330001. [CrossRef] [Google Scholar]
  7. Dikshit, M. K., S. Singh, V. K. Pathak, K. K. Saxena, M. K. Agrawal, V. Malik, et al. 2023. “Surface Characteristics Optimization of Biocompatible Ti6Al4V with RCCD and NSGA II Using Die Sinking EDM.” Journal of Materials Research and Technology 24: 223-235. [CrossRef] [Google Scholar]
  8. Gakis, Georgios P., Stefania Termine, Aikaterini-Flora A. Trompeta, Ioannis G. Aviziotis, and Costas A. Charitidis. “Unraveling the mechanisms of carbon nanotube growth by chemical vapor deposition.” Chemical Engineering Journal 445 (2022): 136807. [CrossRef] [Google Scholar]
  9. Gupta, P., N. Gupta, and K. K. Saxena. 2023. “Predicting Compressive Strength of Geopolymer Concrete Using Machine Learning.” Innovation and Emerging Technologies 10: 2350003. [CrossRef] [Google Scholar]
  10. Horng, Ray-Hua, Dong-Sing Wuu, Po-Liang Liu, Apoorva Sood, Fu-Gow Tarntair, Yu-Hsuan Chen, Singh Jitendra Pratap, and Ching-Lien Hsiao. “Growth mechanism and characteristics of β-Ga2O3 heteroepitaxailly grown on sapphire by metalorganic chemical vapor deposition.” Materials Today Advances 16 (2022): 100320. [CrossRef] [Google Scholar]
  11. Kalpana, G., P. V. Kumar, S. Aljawarneh, and R. V. Krishnaiah. 2018. “Shifted Adaption Homomorphism Encryption for Mobile and Cloud Learning.” Computers & Electrical Engineering 65: 178-195. [CrossRef] [Google Scholar]
  12. Kandhare, A. D., P. A. Thakurdesai, P. Wangikar, and S. L. Bodhankar. 2019. “A Systematic Literature Review of Fenugreek Seed Toxicity by Using ToxRTool: Evidence from Preclinical and Clinical Studies.” Heliyon 5, no. 4. [Google Scholar]
  13. Awasthi, A., K. K. Saxena, and V. Arun. 2021. “Sustainable and Smart Metal Forming Manufacturing Process.” Materials Today: Proceedings 44: 2069-2079. [CrossRef] [Google Scholar]
  14. Korpi, A. G., Ş. Ţălu, M. Bramowicz, A. Arman, S. Kulesza, B. Pszczolkowski, et al. 2019. “Minkowski Functional Characterization and Fractal Analysis of Surfaces of Titanium Nitride Films.” Materials Research Express 6, no. 8: 086463. [CrossRef] [Google Scholar]
  15. Kumar, P. S. S., and K. V. Allamraju. 2019. “A Review of Natural Fiber Composites [Jute, Sisal, Kenaf].” Materials Today: Proceedings 18: 2556-2562. [CrossRef] [Google Scholar]
  16. Kumar, P., A. Kumar Jain, J. P. Srivastava, R. Kumar, K. K. Saxena, C. Prakash, and D. Buddhi. 2023. “Multiphysics Simulation of the Shape Prediction and Material Removal Rate in Electrochemical Machining Process.” Advances in Materials and Processing Technologies: 1-13. [Google Scholar]
  17. Kumari, C. U., A. S. D. Murthy, B. L. Prasanna, M. P. P. Reddy, and A. K. Panigrahy. 2021. “An Automated Detection of Heart Arrhythmias Using Machine Learning Technique: SVM.” Materials Today: Proceedings 45: 1393-1398. [CrossRef] [Google Scholar]
  18. Liu, Zexin, Xieyuan Jiang, Zhaoyang Li, Yufeng Zheng, Jing-Jun Nie, Zhenduo Cui, Yanqin Liang, Shengli Zhu, Dafu Chen, and Shuilin Wu. “Recent progress of photo-excited antibacterial materials via chemical vapor deposition.” Chemical Engineering Journal 437 (2022): 135401. [CrossRef] [Google Scholar]
  19. Lu, Chunhui, Mingwei Luo, Yanqing Ge, Yuanyuan Huang, Qiyi Zhao, Yixuan Zhou, and Xinlong Xu. “Layer-dependent nonlinear optical properties of WS2, MoS2, and Bi2S3 films synthesized by chemical vapor deposition.” ACS Applied Materials & Interfaces 14, no. 1 (2021): 2390-2400. [Google Scholar]
  20. Manawi, Yehia M., Ihsanullah, Ayman Samara, Tareq Al-Ansari, and Muataz A. Atieh. “A review of carbon nanomaterials’ synthesis via the CVD method.” Materials 11, no. 5 (2018): 822. [CrossRef] [PubMed] [Google Scholar]
  21. Mubarak, Nabisab Mujawar, J. N. Sahu, Rama Rao Karri, E. C. Abdullah, and Manoj Tripathi. “Effect of hydrogen flow rate on the synthesis of carbon nanofiber using microwave-assisted chemical vapour deposition with ferrocene as a catalyst.” International Journal of Hydrogen Energy 48, no. 56 (2023): 21332-21344. [CrossRef] [Google Scholar]
  22. Nair, A., S. Kumanan, C. Prakash, D. G. Mohan, K. K. Sxena, S. Kumar, and G. Kumar. 2023. “Research Developments and Technological Advancements in Conventional and Non-conventional Machining of Superalloys–a Review.” Journal of Adhesion Science and Technology: 1-72. [Google Scholar]
  23. Awasthi, A., K. K. Saxena, and V. Arun. 2020. “Sustainability and Survivability in Manufacturing Sector.” In Modern Manufacturing Processes, 205-219. Woodhead Publishing. [Google Scholar]
  24. Perevalov, Timofey Viktorovich, V. A. Volodin, G. N. Kamaev, A. A. Gismatulin, S. G. Cherkova, I. P. Prosvirin, K. N. Astankova, and V. A. Gritsenko. “Electronic structure of silicon oxynitride films grown by plasma-enhanced chemical vapor deposition for memristor application.” Journal of Non-Crystalline Solids 598 (2022): 121925. [CrossRef] [Google Scholar]
  25. Pon, V. D., K. J. Wilson, K. Hariprasad, V. Ganesh, H. E. Ali, H. Algarni, and I. S. Yahia. 2021. “Enhancement of Optoelectronic Properties of ZnO Thin Films by Al Doping for Photodetector Applications.” Superlattices and Microstructures 151: 106790. [CrossRef] [Google Scholar]
  26. Prateek, Soumy, Rajnish Garg, Kuldeep Kumar Saxena, V. K. Srivastav, Hitesh Vasudev, and Nikhil Kumar. 2023. “Data-driven Materials Science: Application of ML for Predicting Band Gap.” Advances in Materials and Processing Technologies: 1-10. [Google Scholar]
  27. Raj, I. L. P., S. Valanarasu, K. Hariprasad, J. S. Ponraj, N. Chidhambaram, V. Ganesh, et al. 2020. “Enhancement of Optoelectronic Parameters of Nd-doped ZnO Nanowires for Photodetector Applications.” Optical Materials 109: 110396. [CrossRef] [Google Scholar]
  28. Sambasivam, S., A. S. Abed, S. Chopde, P. P. Patil, P. Math, A. Parmar, et al. 2023. “Role of Processing Techniques Related to Mg-MMCs for Biomedical Implantation: An Overview.” Materials Today: Proceedings. [Google Scholar]
  29. Sarkhel, P., M. K. Dikshit, V. K. Pathak, K. K. Saxena, C. Prakash, and D. Buddhi. 2023. “Robust Deflection Control and Analysis of a Fishing Rod-type Flexible Robotic Manipulator for Collaborative Robotics.” Robotics and Autonomous Systems 159: 104293. [CrossRef] [Google Scholar]
  30. Awasthi, A., A. Gupta, K. K. Saxena, R. K. Dwivedi, D. Kundalkar, D. S. Abdul-Zahra, et al. 2022. “Design and Analysis of Equal-Channel Angular Pressing of Al6061: A Comparative Study.” Advances in Materials and Processing Technologies: 1-10. [Google Scholar]
  31. Singh, B., I. Kumar, K. K. Saxena, K. A. Mohammed, M. I. Khan, S. B. Moussa, and S. S. Abdullaev. 2023. “A Future Prospects and Current Scenario of Aluminium Metal Matrix Composites Characteristics.” Alexandria Engineering Journal 76: 1-17. [CrossRef] [Google Scholar]
  32. Singh, S., V. Agrawal, K. K. SAXENA, and K. A. Mohammed. 2023. “Optimization on Manufacturing Processes at Indian Industries Using TOPSIS.” Indian Journal of Engineering and Materials Sciences (IJEMS) 30, no. 1: 32-44. [Google Scholar]
  33. Vinoth, S., G. Kanimozhi, K. Hari Prasad, K. Harish, E. S. Srinadhu, and N. Satyanarayana. 2019. “Enhanced Ionic Conductivity of Electrospun Nanocomposite (PVDF-HFP+ TiO2 Nanofibers Fillers) Polymer Fibrous Membrane Electrolyte for DSSC Application.” Polymer Composites 40, no. 4: 1585-1594. [CrossRef] [Google Scholar]
  34. Yahyazadeh, Arash, Behnam Khoshandam, and Ramachandran Vasant Kumar. “An investigation into the role of substrates in the physical and electrochemical properties of carbon nanotubes prepared by chemical vapor deposition.” Physica B: Condensed Matter 562 (2019): 42-54. [CrossRef] [Google Scholar]
  35. Yang, Bo, Lanxing Gao, Miaoxuan Xue, Haihe Wang, Yanqing Hou, Yingchun Luo, Han Xiao et al. “Experimental and simulation research on the preparation of carbon nano-materials by chemical vapor deposition.” Materials 14, no. 23 (2021): 7356. [CrossRef] [PubMed] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.