EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 430 (2023) E3S Web Conf., 430 (2023) 01126 References
Open Access
Issue
E3S Web Conf.
Volume 430, 2023
15th International Conference on Materials Processing and Characterization (ICMPC 2023)
Article Number 01126
Number of page(s) 10
DOI https://doi.org/10.1051/e3sconf/202343001126
Published online 06 October 2023
  1. Coble, R. L. (1961). Sintering Crystalline Solids. Journal of Applied Physics, 32(5), 787-792. [CrossRef] [Google Scholar]
  2. Awasthi, A., A. Gupta, K. K. Saxena, R. K. Dwivedi, D. Kundalkar, D. S. Abdul-Zahra, et al. 2022. “Design and Analysis of Equal-Channel Angular Pressing of Al6061: A Comparative Study.” Advances in Materials and Processing Technologies: 1-10. [Google Scholar]
  3. Basavapoornima, C., C. R. Kesavulu, T. Maheswari, W. Pecharapa, S. R. Depuru, and C. K. Jayasankar. 2020. “Spectral Characteristics of Pr3+-doped Lead Based Phosphate Glasses for Optical Display Device Applications.” Journal of Luminescence 228: 117585. [CrossRef] [Google Scholar]
  4. Bharathi, P., and T. Sampath Kumar. “Mechanical characteristics and wear behaviour of Al/SiC and Al/SiC/B4C hybrid metal matrix composites fabricated through powder metallurgy route.” Silicon (2023): 1-17. [Google Scholar]
  5. Bhukya, M. N., and V. R. Kota. 2019. “A Quick and Effective MPPT Scheme for Solar Power Generation During Dynamic Weather and Partial Shaded Conditions.” Engineering Science and Technology, an International Journal 22, no. 3: 869-884. [CrossRef] [Google Scholar]
  6. Chakraborty, D., A. Rathi, R. Singh, V. K. Pathak, A. K. Srivastava, A. Sharma, et al. 2023. “External Six-bar Mechanism Rehabilitation Device for Index Finger: Development and Shape Synthesis.” Robotics and Autonomous Systems 161: 104336. [CrossRef] [Google Scholar]
  7. Chauhan, R. B., T. V. Shah, D. H. Shah, T. J. Gohil, A. D. Oza, B. Jajal, and K. K. Saxena. 2023. “An Overview of Image Processing for Dental Diagnosis.” Innovation and Emerging Technologies 10: 2330001. [CrossRef] [Google Scholar]
  8. Dikshit, M. K., S. Singh, V. K. Pathak, K. K. Saxena, M. K. Agrawal, V. Malik, et al. 2023. “Surface Characteristics Optimization of Biocompatible Ti6Al4V with RCCD and NSGA II Using Die Sinking EDM.” Journal of Materials Research and Technology 24: 223-235. [CrossRef] [Google Scholar]
  9. Awasthi, A., K. K. Saxena, and V. Arun. 2020. “Sustainability and Survivability in Manufacturing Sector.” In Modern Manufacturing Processes, 205-219. Woodhead Publishing. [Google Scholar]
  10. Awasthi, A., K. K. Saxena, and V. Arun. 2021. “Sustainable and Smart Metal Forming Manufacturing Process.” Materials Today: Proceedings 44: 2069-2079. [CrossRef] [Google Scholar]
  11. Gupta, P., N. Gupta, and K. K. Saxena. 2023. “Predicting Compressive Strength of Geopolymer Concrete Using Machine Learning.” Innovation and Emerging Technologies 10: 2350003. [CrossRef] [Google Scholar]
  12. Kalpana, G., P. V. Kumar, S. Aljawarneh, and R. V. Krishnaiah. 2018. “Shifted Adaption Homomorphism Encryption for Mobile and Cloud Learning.” Computers & Electrical Engineering 65: 178-195. [CrossRef] [Google Scholar]
  13. Kandhare, A. D., P. A. Thakurdesai, P. Wangikar, and S. L. Bodhankar. 2019. “A Systematic Literature Review of Fenugreek Seed Toxicity by Using ToxRTool: Evidence from Preclinical and Clinical Studies.” Heliyon 5, no. 4. [Google Scholar]
  14. Kim, Dokyoon, Kwangsoo Shin, Soon Gu Kwon, and Taeghwan Hyeon. “Synthesis and biomedical applications of multifunctional nanoparticles.” Advanced Materials 30, no. 49 (2018): 1802309. [CrossRef] [Google Scholar]
  15. Korpi, A. G., Ş. Ţălu, M. Bramowicz, A. Arman, S. Kulesza, B. Pszczolkowski, et al. 2019. “Minkowski Functional Characterization and Fractal Analysis of Surfaces of Titanium Nitride Films.” Materials Research Express 6, no. 8: 086463. [CrossRef] [Google Scholar]
  16. Kumar, P. S. S., and K. V. Allamraju. 2019. “A Review of Natural Fiber Composites [Jute, Sisal, Kenaf].” Materials Today: Proceedings 18: 2556-2562. [CrossRef] [Google Scholar]
  17. Kumar, P., A. Kumar Jain, J. P. Srivastava, R. Kumar, K. K. Saxena, C. Prakash, and D. Buddhi. 2023. “Multiphysics Simulation of the Shape Prediction and Material Removal Rate in Electrochemical Machining Process.” Advances in Materials and Processing Technologies: 1-13. [Google Scholar]
  18. Kumari, C. U., A. S. D. Murthy, B. L. Prasanna, M. P. P. Reddy, and A. K. Panigrahy. 2021. “An Automated Detection of Heart Arrhythmias Using Machine Learning Technique: SVM.” Materials Today: Proceedings 45: 1393-1398. [CrossRef] [Google Scholar]
  19. Manohar, Guttikonda, K. M. Pandey, and S. R. Maity. “Effect of sintering mechanisms on mechanical properties of AA7075/B4C composite fabricated by powder metallurgy techniques.” Ceramics International 47, no. 11 (2021): 15147-15154. [CrossRef] [Google Scholar]
  20. Manohar, Guttikonda, S. R. Maity, and K. M. Pandey. “Microstructural and mechanical properties of microwave sintered AA7075/graphite/SiC hybrid composite fabricated by powder metallurgy techniques.” Silicon 14, no. 10 (2022): 5179-5189. [CrossRef] [Google Scholar]
  21. Nair, A., S. Kumanan, C. Prakash, D. G. Mohan, K. K. Sxena, S. Kumar, and G. Kumar. 2023. “Research Developments and Technological Advancements in Conventional and Non-conventional Machining of Superalloys–a Review.” Journal of Adhesion Science and Technology: 1-72. [Google Scholar]
  22. Pon, V. D., K. J. Wilson, K. Hariprasad, V. Ganesh, H. E. Ali, H. Algarni, and I. S. Yahia. 2021. “Enhancement of Optoelectronic Properties of ZnO Thin Films by Al Doping for Photodetector Applications.” Superlattices and Microstructures 151: 106790. [CrossRef] [Google Scholar]
  23. Prateek, Soumy, Rajnish Garg, Kuldeep Kumar Saxena, V. K. Srivastav, Hitesh Vasudev, and Nikhil Kumar. 2023. “Data-driven Materials Science: Application of ML for Predicting Band Gap.” Advances in Materials and Processing Technologies: 1-10. [Google Scholar]
  24. Raj, I. L. P., S. Valanarasu, K. Hariprasad, J. S. Ponraj, N. Chidhambaram, V. Ganesh, et al. 2020. “Enhancement of Optoelectronic Parameters of Nd-doped ZnO Nanowires for Photodetector Applications.” Optical Materials 109: 110396. [CrossRef] [Google Scholar]
  25. Sambasivam, S., A. S. Abed, S. Chopde, P. P. Patil, P. Math, A. Parmar, et al. 2023. “Role of Processing Techniques Related to Mg-MMCs for Biomedical Implantation: An Overview.” Materials Today: Proceedings. [Google Scholar]
  26. Sarkhel, P., M. K. Dikshit, V. K. Pathak, K. K. Saxena, C. Prakash, and D. Buddhi. 2023. “Robust Deflection Control and Analysis of a Fishing Rod-type Flexible Robotic Manipulator for Collaborative Robotics.” Robotics and Autonomous Systems 159: 104293. [CrossRef] [Google Scholar]
  27. Singh, B., I. Kumar, K. K. Saxena, K. A. Mohammed, M. I. Khan, S. B. Moussa, and S. S. Abdullaev. 2023. “A Future Prospects and Current Scenario of Aluminium Metal Matrix Composites Characteristics.” Alexandria Engineering Journal 76: 1-17. [CrossRef] [Google Scholar]
  28. Singh, S., V. Agrawal, K. K. SAXENA, and K. A. Mohammed. 2023. “Optimization on Manufacturing Processes at Indian Industries Using TOPSIS.” Indian Journal of Engineering and Materials Sciences (IJEMS) 30, no. 1: 32-44. [Google Scholar]
  29. Song, Yuchao, Tuo Cheng, Cheng Wang, Oleksandr Stasiuk, Dmytro Savvakin, and Orest Ivasishin. “Microstructural Characteristics of Ti-Based Composites with Various Ceramic Reinforcements Manufactured via Hydrogen-Assisted Blended Elemental Powder Metallurgy.” Advanced Engineering Materials 25, no. 5 (2023): 2101689. [CrossRef] [Google Scholar]
  30. Suriyaprakash, M., M. Nallusamy, K. Kiran, and S. Rajkumar. “Investigation of mechanical properties on Mg/TiC/graphite hybrid composites fabricated by powder metallurgy techniques.” Materials Today: Proceedings 62 (2022): 2256-2260. [CrossRef] [Google Scholar]
  31. Usca, Üsame Ali, Mahir Uzun, Mustafa Kuntoğlu, Serhat Şap, Khaled Giasin, and Danil Yurievich Pimenov. “Tribological aspects, optimization and analysis of Cu-B-CrC composites fabricated by powder metallurgy.” Materials 14, no. 15 (2021): 4217. [CrossRef] [PubMed] [Google Scholar]
  32. Venkatesh, V. S. S., and Ashish B. Deoghare. “Effect of sintering mechanisms on the mechanical behaviour of SiC and kaoline reinforced hybrid aluminium metal matrix composite fabricated through powder metallurgy technique.” Silicon 14, no. 10 (2022): 5481-5493. [CrossRef] [Google Scholar]
  33. Vinoth, S., G. Kanimozhi, K. Hari Prasad, K. Harish, E. S. Srinadhu, and N. Satyanarayana. 2019. “Enhanced Ionic Conductivity of Electrospun Nanocomposite (PVDF-HFP+ TiO2 Nanofibers Fillers) Polymer Fibrous Membrane Electrolyte for DSSC Application.” Polymer Composites 40, no. 4: 1585-1594. [CrossRef] [Google Scholar]
  34. Wei, Yong, Lai-Ma Luo, Huai-Bing Liu, Xiang Zan, Jiu-Peng Song, Qiu Xu, Xiao-Yong Zhu, and Yu-Cheng Wu. “A powder metallurgy route to fabricate CNT-reinforced molybdenum-hafnium-carbon composites.” Materials & Design 191 (2020): 108635. [CrossRef] [Google Scholar]
  35. Wu, Yihao, Ke Zhan, Zheng Yang, Wei Sun, Bin Zhao, Ya Yan, and Junhe Yang. “Graphene oxide/Al composites with enhanced mechanical properties fabricated by simple electrostatic interaction and powder metallurgy.” Journal of Alloys and Compounds 775 (2019): 233-240. [CrossRef] [Google Scholar]
  36. Zhang, Dong-Dong, Xi-Ya He, Hua Zhao, and Ya-Li Gao. “Properties of TiCp/Cu composites fabricated by powder metallurgy and electrodeless copper plating.” Materials Science and Technology 38, no. 1 (2022): 5-11. [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.