Open Access
Issue
E3S Web Conf.
Volume 430, 2023
15th International Conference on Materials Processing and Characterization (ICMPC 2023)
Article Number 01223
Number of page(s) 8
DOI https://doi.org/10.1051/e3sconf/202343001223
Published online 06 October 2023
  1. Din, M. F. M., & Mohamed, N. M. Z. N. Effect of heat treatment on the properties of carbide cutting tools: a review. Journal of Mechanical Engineering and Sciences, 13 (1), 4626-4638, (2019). [Google Scholar]
  2. Altan, E., Avcu, E., and Yildiz, Y. The effect of cutting speed, feed rate, and depth of cut on the tool life of carbide end mills. Materials and Manufacturing Processes, 25(2), 91-96, (2010). [Google Scholar]
  3. Afolalu, S. A., Ikumapayi, O. M., Ogedengbe, T. S., & Emetere, M. E. Performance Assessment of the Developed Flux Powder on the Tensile and Hardness Properties of Steels Joints Using TIG-Welding. Revue des Composites et des Matériaux Avancés, 31(3), (2021). [Google Scholar]
  4. Ogedengbe, T. S., Abdulkareem, S., & Aweda, J. O. Effect of Coolant Temperature on Surface Finish during Turning of Titanium Alloy Ti6Al4, (2018). [Google Scholar]
  5. Abdulkareem, S., Ogedengbe, T. S., Aweda, J. O., Ajiboye, T. K., Khan, A. A., & Babatunde, M. A. (2019, December). Investigation on effect of material compositions on machinability of carbon steels. In Journal of Physics: Conference Series (Vol. 1378, No. 2, p. 022046). IOP Publishing, (2019), [CrossRef] [Google Scholar]
  6. Marashi, A. R., Rezaei, A. M., and Mohammadi, M. The effect of tool `geometry on the tool life of carbide drills in drilling AISI 1045 steel. Journal of Manufacturing Processes, 39, 117-128, (2019). [CrossRef] [Google Scholar]
  7. Sikora, M., Skrabalak, G., & Szydlowski, M. (2019). The impact of coolant pressure on machinability and chip formation process in the milling of aluminum alloy. Materials, 12(8), 1237,(2019). [Google Scholar]
  8. Ravi, P., & Narayanan, S. (2019). Effect of annealing on mechanical properties of Al6061-T6 alloy. Materials Today: Proceedings, 18(Part 1), 229-234, (2019). doi: 10.1016/j.matpr.2019.06.212 [Google Scholar]
  9. Choudhary, S., & Agarwal, S. (2019). Experimental analysis of cutting parameters and tool wear during high-speed milling of Al6061 using coated carbide tool. International Journal of Machining and Machinability of Materials, 21(1), 1-20,(2019). [Google Scholar]
  10. Dhiman, A., Kumar, A., & Kumar, P. (2020). Optimization of machining parameters during hard turning of EN31 steel using carbide inserts coated with TiAlN and TiN. International Journal of Machining and Machinability of Materials, 22(2), 107-125. [Google Scholar]
  11. Ogedengbe T.S., Ikumapayi O.M., Afolalu S.A., Musa-Olokuta A.I., Adeyi T.A., Omovigho M.O., Nkanga J.B Comparative Analysis on the Effect of Agro-Waste Based Flux During Arc-Welding of Mild-Steel. Revue des Composites et des Matériaux Avancés, 32(4), 199-204, (2022). [CrossRef] [Google Scholar]
  12. Bhargava, R., Chaturvedi, V., Rana, J. C., & Kumar, V. Wheat straw: A potential feedstock for the production of value-added products. Waste Management, 106, 215-226. (2020). [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.