Open Access
| Issue |
E3S Web Conf.
Volume 430, 2023
15th International Conference on Materials Processing and Characterization (ICMPC 2023)
|
|
|---|---|---|
| Article Number | 01258 | |
| Number of page(s) | 8 | |
| DOI | https://doi.org/10.1051/e3sconf/202343001258 | |
| Published online | 06 October 2023 | |
- R.T.D. Prabhakaran, B. Madsen, H. Toftegaard and C.M. Markussen “Flexural Properties of Hybrid Natural Composite-Micromechanics and Experimental Assessment”. Proceedings of 3rd Asian Conference on Mechanics of Functional Materials and Structures (ACMFMS 2012), Indian Institute of Technology, New Delhi, Vol. 1, pp 469- 472, 2012. [Google Scholar]
- V. Naga Prasad Naidu, G. Ramachandra Reddy, M. Ashok Kumar. “Thermal Conductivity of Sisal/Glass Fibre Reinforced Hybrid Composites”. International Journal of Fiber and Textile Research 2011; 1(1): 28-30. [Google Scholar]
- Goda K., Sreekala M.S., Gomes A, Et Al. “Improvement Of Plant Based Natural Fibers For Toughening Green Composites-Effect of Load Application During Mercerization of Ramie Fibers, Composites“ Part A, 37, Pp 2213- 2220, 2006. [CrossRef] [Google Scholar]
- Saravana Bavan D And Mohan Kumar G C “Thermal Properties of Maize Fiber Reinforced Unsaturated Polyester Resin Composites” Proceedings of World Congress On Engineering 2013 Vol III. [Google Scholar]
- Igor Maria De Rosa, Jose Maria Kenny “Morphological, Thermal and Mechanical Characterization of Okra (Abelmoschus Esculentus) Fibres as Potential Reinforcement in Polymer Composites” Science and Technology 2009. [Google Scholar]
- P. Sivasubramanian Dr.M. Thiruchitrambalam “Hybridization of Natural Fiber Composites on Mechanical Properties” Technology and Engineering, 45 (11), 2006, 149 – 155. [Google Scholar]
- Arpitha G R., Sanjay M R., “Mechanical Properties Of Epoxy Based Hybrid Composites Reinforced With Sisal/SIC/Glass Fibers” International Journal Of Engineering Research And General Science Volume 2, Issue 5, August-September, 2014. [Google Scholar]
- P. Amuthakkannan, V. Manikandan “Effect of Fibre Length and Fibre Content on Mechanical Properties of Short Basalt Fibre Reinforced Polymer Matrix Composites” Materials Physics and Mechanics 16 (2013) 107-117. [Google Scholar]
- P. Persico, D. Acierno “Mechanical And Thermal Behaviour Of Ecofriendly Composites Reinforced By Kenaf And Caroa Fibers” Hindawi Publishing Corporation International Journal Of Polymer Science Volume 2011, Article Id 841812, 7 Pages. [Google Scholar]
- J. Manoj kumar and N. Gopikrishna “Comparative Studies On Mechanical Characteristics Of Granulated Blast Furnace SlagAndFlyash Reinforced Aluminium Composites” International Journal of Mechanical Engineering and Technology (IJMET)Volume 8, Issue 11, November 2017, pp. 277 – 284 [Google Scholar]
- Amit Kumar, N.K. Batra, Rajesh Khanna May-Jun 2012 “Experimental Study of the Effect of Hybridization on Mechanical Behaviour of Jute/Glass Fibers Reinforced Polyester Composite”. [Google Scholar]
- Ekhlas A. Osman and Anatolivakhguelt, “Kenaf/Recycled Jute Natural Fibers unsaturated Polyester Composites Water Absorption/Dimensional Stability and Mechanical Properties”, International Journal of Computational Materials science And Engineering vol. 1, No. 1 (2012). [Google Scholar]
- K. Kiran kumar, Devanapally Srikanth rao and GopikrishnaNidigonda “evaluation of strain energy release rate of epoxy glass fibre laminate (mode-i)” International Education Research Journal, e-issnno : 2454-9916 | volume : 3| issue : 1| Jan 2017, pp 44-46 [Google Scholar]
- D. Bachtiar, S.M. Sapuan and M.M. Hamdan January-June 2010 “Flexural Properties of Alkaline Treated Sugar Palm Fibre Reinforced Epoxy Composites”. [Google Scholar]
- Dixit S. And Verma P. June (2012) the “Effect of Hybridization on Mechanical Behaviour of Coir/Sisal/Jute Fibres Reinforced Polyester Composite Material”. [Google Scholar]
- Girisha. C, Sanjeevamurthy, GuntiRangasrinivas Mar-Apr 2012 “Tensile Properties of Natural Fiber-Reinforced Epoxy-Hybrid Composites”. [Google Scholar]
- Devanapally Srikanth Rao, Gopikrishna Nidigonda and J. Manoj kumar “Evaluation of Mode-I Fracture Toughness for Composite Laminate-Epoxy-Glass Fiber” Research Journal of Engineering and Technology 9(1)April 2018, pp: 70-74 [CrossRef] [Google Scholar]
- C.V. Srinivasa, K.N. Bharath Aug 2011 “Impact and Hardness Properties of Areca Fiber-Epoxy Reinforced Composites”. [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.