Open Access
Issue
E3S Web Conf.
Volume 430, 2023
15th International Conference on Materials Processing and Characterization (ICMPC 2023)
Article Number 01261
Number of page(s) 5
DOI https://doi.org/10.1051/e3sconf/202343001261
Published online 06 October 2023
  1. Jain V. K., Advanced Machining Processes. Allied Publishers 2009. [Google Scholar]
  2. Pandey P. C. and Shan H. S., Modern Machining Processes. Tata McGraw Hill Education 1980. [Google Scholar]
  3. Ho K.H. and Newman S. T., State of the art electrical discharge machining (EDM). International Journal of Machine Tools and Manufacture 43 (2003) 1287–1300. [CrossRef] [Google Scholar]
  4. Danish M, Al-Amin M, Rubaiee S, Abdul-Rani AM, Zohura FT, Ahmed A, Ahmed R, Yildirim MB. Enhanced machining features and multi-objective optimization of CNT mixed-EDM process for processing 316L steel. The International Journal of Advanced Manufacturing Technology 120 (2022) 6125-6141. [CrossRef] [Google Scholar]
  5. Mohanty R. K. and Saini S. K., Experimental Investigation on Electrical Discharge Machining of Steel H13. Journal of Materials Today: Proceedings 44 (2021) 1949-1952. [CrossRef] [Google Scholar]
  6. Mohanty R. K. and Saini S. K., Optimization of EDM Process Parameters for Machining of Steel. Recent Advances in Smart Manufacturing and Materials, pp 509-514. https://doi.org/10.1007/978-981-16-3033-0_48 . [Google Scholar]
  7. Pachaury Y. and Tandon P., An overview of electric discharge machining of ceramics and ceramic based composites. Journal of Manufacturing Processes 25 (2017) 369-390. [CrossRef] [Google Scholar]
  8. Niamat M., Sarfraz S., Shehab E., Ismail S. O., Khalid Q. S., Experimental Characterization of Electrical Discharge Machining of Aluminum 6061 T6 Alloy using Different Dielectrics. Arabian Journal for Science and Engineering 44 (2019) 8043–8052. [CrossRef] [Google Scholar]
  9. Priyadarshini M, Vishwanatha HM, Biswas CK, Singhal P, Buddhi D, Behera A. Effect of grey relational optimization of process parameters on surface and tribological characteristics of annealed AISI P20 tool steel machined using wire EDM. International Journal on Interactive Design and Manufacturing (2022). [Google Scholar]
  10. Kiyak M. Investigation of effects of cutting parameters on surface quality and hardness in the wire-EDM process. The International Journal of Advanced Manufacturing Technology 119 (2022) 647-655. [CrossRef] [Google Scholar]
  11. Saini S. K., Dubey A. K. Dubey, Study of Material Characteristics in Laser Trepan Drilling of ZTA. Journal of Manufacturing Processes 44 (2019) 349-358. [CrossRef] [Google Scholar]
  12. Saini S. K., Dubey A. K., Upadhyay B. N., Study and optimization of recast layer thickness and surface quality in Laser Trepan drilling of ZTA. International Journal of Advanced Manufacturing Technology 103 (2019) 2977-2989. [CrossRef] [Google Scholar]
  13. Saini S. K., Dubey A. K., Upadhyay B. N.,Choubey A., Study of hole characteristics in Laser Trepan Drilling of ZTA. Optics and Laser Technology 103(2018) 330-339 [CrossRef] [Google Scholar]
  14. Saini S. K., Dubey A. K., Parameters optimization for microcrack width in laser trepanned hole. Journal of Materials Today: Proceedings 44 (2021) 3055-3058. [CrossRef] [Google Scholar]
  15. Saini S. K., Dubey A. K. and Upadhyay B. N., Optimization of surface roughness of laser trepanned hole in ZTA plate. Machines, Mechanism and Robotics: Lecture Notes in Mechanical Engineering, pp 61-67. DOI: https://doi.org/10.1007/978-981-16-0550-5_8. [Google Scholar]
  16. Pal S. and Saini S. K., Experimental Investigation on Cycle Time in Machining of Forged Crankshaft. Journal of Materials Today: Proceedings 44 (2021) 1468-1471. [CrossRef] [Google Scholar]
  17. Pal S. and Saini S. K., Experimental Study on Movement of Crankshaft during Machining. Recent Advances in Smart Manufacturing and Materials. Lecture Notes in Mechanical Engineering, pp 505-508.DOI: https://doi.org/10.1007/978-981-16-3033-0_47 . [Google Scholar]
  18. Saini S. K., Response parameters modeling of abrasive jet machining using ANN. Journal of Materials Today: Proceedings 44 (2021) 3055-3058. [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.