Open Access
Issue |
E3S Web Conf.
Volume 430, 2023
15th International Conference on Materials Processing and Characterization (ICMPC 2023)
|
|
---|---|---|
Article Number | 01278 | |
Number of page(s) | 9 | |
DOI | https://doi.org/10.1051/e3sconf/202343001278 | |
Published online | 06 October 2023 |
- Rebelo, J. C.; Dias, A. M.; Kremer, D.; Lebrun, J. L. Influence of EDM Pulse Energy on the Surface Integrity of Martensite Steels. J. Mater. Process. Technol. (1998), 84, 90–96. DOI: 10.1016/S0924-0136(98)00082-X. [CrossRef] [Google Scholar]
- Tyagi, R.; Pandey, K.; Das, A. K.; Mandal, A. Deposition of hBN+ Cu Layer through Electrical Discharge Process Using Green Compact Electrode. Mater. Manuf. Processes. (2019), 34(9), 1035–1048. DOI: 10.1080/10426914.2019.159425. [CrossRef] [Google Scholar]
- Ahmed, A. Deposition and Analysis of Composite Coating on Aluminum Using Ti–B4C Powder Metallurgy Tools in EDM. Mater. Manuf. Processes. (2015), 31(4), 467-474. DOI: 10.1080/10426914.2015.1025967. [Google Scholar]
- Mazarbhuiya, R. M.; Dutta, H.; Debnath, K.; Rahang, M. Surface Modification of CFRP Composite Using reverse-EDM Method. Surf. Int. (2020), 100457. DOI: 10.1016/j.surfin.2020.100457. [Google Scholar]
- Patowari, P. K.; Saha, P.; Mishra, P.K. “An experimental investigation of surface modification of C-40 steel using W–Cu powder metallurgy sintered compact tools in EDM. Int. J. Adv. Manuf. Tech. (2015), 80(1-4), 343-360. DOI: 10.1007/s00170- 015-7004-7. [CrossRef] [Google Scholar]
- Patowari, P. K.; Saha, P.; Mishra, P.K. Taguchi analysis of surface modification technique using W-Cu powder metallurgy sintered tools in EDM and characterization of the deposited layer. Int. J. Adv. Manuf. Tech. 54(5-8), 593-604, (2011).DOI 10.1007/s00170-010-2966-y. [CrossRef] [Google Scholar]
- Patowari, P. K.; Saha, P.; Mishra, P.K. Artificial neural network model in surface modification by EDM using tungsten–copper powder metallurgy sintered electrodes., Int. J. Adv. Manuf. Tech. 51(5-8), 627-638, (2010). DOI 10.1007/s00170-010-2653-z. [CrossRef] [Google Scholar]
- Bui, V.D.; Mwangi, J.W.; Schubert, A. Powder mixed electrical discharge machining for antibacterial coating on titanium implant surfaces. J. Manuf. Processes. 44, 261-270, (2019). DOI: 10.1016/j.jmapro.2019.05.032. [CrossRef] [Google Scholar]
- Sahu, D.R.; Mandal, A. Critical analysis of surface integrity parameters and dimensional accuracy in powder- mixed EDM. Mater. Manuf. Processes. 35(4), 430-441,(2020). DOI: 10.1080/10426914.2020.1718695. [CrossRef] [Google Scholar]
- Mohanty, S.; Kumar, V.; Das, A.K.; Dixit, A.R. Surface modification of Ti-alloy by micro-electrical discharge process using tungsten disulphide powder suspension. J. Manuf. Processes, 37, 28-41, (2019). DOI: 10.1016/j.jmapro.2018.11.007. [CrossRef] [Google Scholar]
- Goto, A.; Magara, T.; Moro, T.; Miyake, H.; Saito, N.; Mohri, N. Formation of Hard Layer on Metallic Material by EDM. Proceedings of 12th International Symposium for Electro Machining (ISEM-12), Aachen, Germany, May (1998); pp. 271–278. [Google Scholar]
- Gadhari, P., & Sahoo, P. Effect of TiO2 particles on micro-hardness, corrosion, wear and friction of Ni–P–TiO2 composite coatings at different annealing temperatures. Surface Review and Letters, 23(01), (2016),1550082. [CrossRef] [Google Scholar]
- Chakraborty, S., Kar, S., Ghosh, S. K., & Dey, V. Parametric optimization of electric discharge coating on Aluminium-6351 alloy with green compact silicon carbide and copper tool: a Taguchi coupled utility concept approach. Surfaces and Interfaces, 7, 47-57, (2017). [CrossRef] [Google Scholar]
- Gill, A. S., & Kumar, S. Surface alloying of H11 die steel by tungsten using EDM process. The international journal of advanced manufacturing technology, 78(9), 1585-1593, (2015). [CrossRef] [Google Scholar]
- Mazarbhuiya, R. M.; Barua, B. M.; & Rahang, M. Taguchi Grey Relational Multi-Response Experimental Optimization on Modification of Al-6061 Surface Using Si–Cu Green Compact Tool in EDM. Surf. Rev. Lett. (2021), 2150073. DOI: 10.1142/S0218625X21500736. [Google Scholar]
- Rahang, M.; Patowari, P. K. Application of Masking Technique in EDM for Generation of Rectangular Shaped Pattern. Int. J. Precis. Technol. (2015), 5(2), 140–156. DOI: 10.1504/IJPTECH.2015.070639. [CrossRef] [Google Scholar]
- Rahang, M.; Patowari, P.K. Parametric optimization for selective surface modification in EDM using Taguchi analysis. Mater. Manuf. Processes. (2016), 31(4), 422-431. DOI:10.1080/10426914.2015.1037921. [CrossRef] [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.