Open Access
Issue |
E3S Web Conf.
Volume 430, 2023
15th International Conference on Materials Processing and Characterization (ICMPC 2023)
|
|
---|---|---|
Article Number | 01287 | |
Number of page(s) | 9 | |
DOI | https://doi.org/10.1051/e3sconf/202343001287 | |
Published online | 06 October 2023 |
- Melissa Burton, K. C. S. Kwok, Ahmad Abdelrazaq. Wind-Induced Motion of Tall Buildings: Designing for Occupant Comfort. International Journal of High-Rise Buildings 2015 Number 1; 2015; Volume 4. [Google Scholar]
- A. K. Jaswal and A. L. Koppar. Climatology and trends in near-surface wind speed over India during 1961-2008. MAUSAM, India Meteorological Department (IMD), Volume 64. [Google Scholar]
- Shuyang Cao, Yukio Tamura, Naoshi Kikuchi, Mamoru Saito, Ikuo Nakayama, Yutaka Matsuzaki. Wind characteristics of a strong typhoon. Journal of Wind Engineering and Industrial Aerodynamics; 2019; Volume 97; Issue 1. [Google Scholar]
- Elena Mele, Maura Imbimbo and Valentina Tomei. The Effect of Slenderness on the Design of Diagrid Structures. International Journal of High-Rise Buildings; 2019; Volume 8 Number 2. [Google Scholar]
- Francesco Cascone, Diana Faiella, Valentina Tomei, Elena Mele. Stress lines inspired structural patterns for tall buildings. Engineering Structures; 2021; Volume 229; page 1. [Google Scholar]
- Marsland, Lucy and Nguyen, Khanh. Improving aerodynamic performance of tall buildings using facade openings at service floors. Journal of wind engineering and industrial aerodynamics; 2022; vol.225. [Google Scholar]
- S. A. Isaev, N. I. Vatin, S. V. Guvernyuk, V. G. Gagarin, B. I. Basok, and Yu. V. Zhukova. Drag Reduction of Energy Efficient Buildings and Wind Energy Extraction Due to Bleeding Effect. published in Teplofizika Vysokikh Temperatur; 2015; Vol. 53. [Google Scholar]
- Chong WT, et al., Design of an exhaust air energy recovery wind turbine generator for energy conservation in commercial buildings. Renewable Energy (2013); July 2014; Volume 67. [Google Scholar]
- V.G. Dmitriev, V.E. Denisov and B.I. Gurevich, et al. The flying wing concept – chances and risks. AIAA Paper 2003-2887; 2003. [Google Scholar]
- Dr. Simon Hamblyn and Prof. Lutz Engisch, A review of carbon fibre rollers in the printing, papermaking and allied industries iP³ Leipzig – Institute for Printing, Processing and Packaging, 2018. [Google Scholar]
- Saleel Visal, Swapnil U. Deokar. A Review Paper on Properties of Carbon Fiber Reinforced Polymers. International Journal for Innovative Research in Science & Technology; 2016; Volume 2. [Google Scholar]
- Gurjeet Singh and Ajay Verma. A Brief Review on injection moulding manufacturing process. 5th International Conference of Materials Processing and Characterization; 2017. [Google Scholar]
- Nilesh S. Varkute and R.S. Maurya. CFD Simulation in Township Planning – A Case Study. International Journal Of Computational Engineering Research (ijceronline.com); Vol. 3 Issue. 3 [Google Scholar]
- Shubhashree Munot, Dattatray Lawate, Pritesh Patil and Tejas Patil. Study of CFD Analysis of Conventional Aircraft Wing Monica Nagawade, Journal of Emerging Technologies and Innovative Research; 2019; Volume 6 Issue 4. [Google Scholar]
- Asis Sarkar and Dhiren Kumar Behera. Wind Turbine Blade Efficiency and Power Calculation with Electrical Analogy. International Journal of Scientific and Research Publication; 2012; Volume 2 Issue 2. [Google Scholar]
- R. Dutton and N. Isyumov. Reduction of tall building motion by aerodynamic treatments. Journal of Wind Engineering and Industrial Aerodynamics; 1990; Volume 36. [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.