Open Access
Issue |
E3S Web Conf.
Volume 430, 2023
15th International Conference on Materials Processing and Characterization (ICMPC 2023)
|
|
---|---|---|
Article Number | 01290 | |
Number of page(s) | 9 | |
DOI | https://doi.org/10.1051/e3sconf/202343001290 | |
Published online | 06 October 2023 |
- Dodeja, L. C., and W. Johnson. “The cold extrusion of circular rods through square multiple hole dies.” Journal of the Mechanics and Physics of Solids 5.4 (1957): 281-295 [CrossRef] [Google Scholar]
- Śliwa, R., and J. Zasadziński. “Surface cracking of bars in the metal-extrusion process: Part II.” Journal of mechanical working technology 14.3 (1987): 343-362. [CrossRef] [Google Scholar]
- Keife, Hans. “Extrusion through two die openings: A 2D upper-bound analysis checked by plasticine experiments.” Journal of Materials Processing Technology 37.1-4 (1993): 189-202. [CrossRef] [Google Scholar]
- Peng, Zhi, and Terry Sheppard. “Simulation of multi-hole die extrusion.” Materials Science and Engineering: A 367.1-2 (2004): 329-342. [CrossRef] [Google Scholar]
- Peng, Zhi, and Terry Sheppard. “Effect of die pockets on multi-hole die extrusion.” Materials Science and Engineering: A 407.1-2 (2005): 89-97. [CrossRef] [Google Scholar]
- Fang, Gang, Jie Zhou, and Jurek Duszczyk. “FEM simulation of aluminium extrusion through two-hole multi-step pocket dies.” Journal of Materials Processing Technology 209.4 (2009): 1891-1900. [CrossRef] [Google Scholar]
- Sinha, M. K. “Modeling and experimental investigation of multi-hole extrusion process.” M. Tech thesis, Department of Mechanical Engineering, Indian Institute of Technology Guwahati, India (2008). [Google Scholar]
- Sinha, M. K., et al. “Theoretical and experimental investigations on multi-hole extrusion process.” Materials & Design 30.7 (2009b): 2386-2392. [CrossRef] [Google Scholar]
- Das, Ratnakar, U. S. Dixit, and S. Deb. “Effect of Extrusion Ratio, Die Land Length and Lubrication on Hardness and Surface Roughness in Multi-Hole Extrusion.” Journal of Manufacturing Technology Research 4.1/2 (2012): 35. [Google Scholar]
- Rita Kumari Sahu, Ratnakar Das*, Bharat Chandra Routara (2018), Effect of die pockets on the extruded products in Multi-hole Extrusion Process: A finite element simulation study. IOP Conf. Series: Materials Science and Engineering 455 (2018) 012020 IOP Publishing doi:10.1088/1757-899X/455/1/012020. (Scopus) [Google Scholar]
- Rita Kumari Sahu, Ratnakar Das, B.C. Routara, Bijaya Bijeta Nayak Sasmita Sahu, (2022), Multi-hole extrusion process: A review, Materials Today: Proceedings 62 (2022) 3522–3527, https://doi.org/10.1016/j.matpr.2022.04.349. (Scopus). [CrossRef] [Google Scholar]
- Rita Kumari Sahu, Ratnakar Das*, Binita Dash, B.C. Routara (2018), Finite Element Analysis and Experimental Study on Forward, Backward and Forward-backward Multi-hole Extrusion Process, Materials Today: Proceedings, Vol. 5 (2018), 5229-5234. [CrossRef] [Google Scholar]
- Mohapatra, Chitta R., and N. C. Nayak. “Squared Multi-hole Extrusion Process: Experimentation & Optimization.” International Refereed Journal of Engineering and Science (IRJES) 4.8 (2015): 32-37. [Google Scholar]
- Mueller, Soeren, and Vidal Sanabria. “Influence of choked angle of bearing channel on profile grain structure during multi-hole extrusion of aluminum alloy.” Procedia Manufacturing 15 (2018): 201-208. [CrossRef] [Google Scholar]
- Fanlei Min, Guangming Zhu1, Bowen Yue, Zongshen Wang, Zhenyu Yang and Xiaoqing Zhai, Influence of exit velocity distribution on self-bending extrusion, Engineering Research Express, 2 (2020) [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.