Open Access
Issue |
E3S Web Conf.
Volume 430, 2023
15th International Conference on Materials Processing and Characterization (ICMPC 2023)
|
|
---|---|---|
Article Number | 01294 | |
Number of page(s) | 10 | |
DOI | https://doi.org/10.1051/e3sconf/202343001294 | |
Published online | 06 October 2023 |
- Özdemir, N., Sarsılmaz, F., & Hasçalık, A. (2007). Effect of rotational speed on the interface properties of friction-welded AISI 304L to 4340 steel. Materials & design, 28(1), 301-307. [CrossRef] [Google Scholar]
- James, J. A., & Sudhish, R. (2016). Study on effect of interlayer in friction welding for dissimilar steels: SS 304 and AISI 1040. Procedia Technology, 25, 1191-1198. [CrossRef] [Google Scholar]
- Vivekananthan, M., Saravanakumar, M., Ross, K. N. S., Kumar, K. S. S., & Raj, F. S. (2020). Experimental investigation of Mechanical properties in friction welding parameters for dis-similar metals (SS-304 & SS-410). Manufacturing Engineering, 2214, 7853. [Google Scholar]
- Singh, D. K., Sahoo, G., Basu, R., Sharma, V., & Mohtadi-Bonab, M. A. (2018). Investigation on the microstructure—mechanical property correlation in dissimilar steel welds of stainless steel SS 304 and medium carbon steel EN 8. Journal of Manufacturing Processes, 36, 281-292. [CrossRef] [Google Scholar]
- Sharma, P., & Dwivedi, D. K. (2019). A-TIG welding of dissimilar P92 steel and 304H austenitic stainless steel: mechanisms, microstructure and mechanical properties. Journal of Manufacturing Processes, 44, 166-178. [CrossRef] [Google Scholar]
- Pandey, C. (2020). Mechanical and metallurgical characterization of dissimilar P92/SS304 L welded joints under varying heat treatment regimes. Metallurgical and Materials Transactions A, 51(5), 2126-2142. [CrossRef] [Google Scholar]
- Singh, P. J., Guha, B., & Achar, D. R. G. (2003). Fatigue tests and estimation of crack initiation and propagation lives in AISI 304L butt-welds with reinforcement intact. Engineering Failure Analysis, 10(4), 383-393. [CrossRef] [Google Scholar]
- Patel, T. M., & Patel, K. R. Parametric Optimization of Gas Metal Arc Welding Process Using Activated Flux for SS 304 by Taguchi Method. [Google Scholar]
- Ayof, M. N., Hussein, N. I. S., & Noh, M. M. (2017, September). Gas metal arc welding parameters effect on properties of tailored orbital weld of SS304 and BS1387. In IOP Conference Series: Materials Science and Engineering (Vol. 238, No. 1, p. 012015). IOP Publishing. [CrossRef] [Google Scholar]
- Lee, W. S., Tzeng, F. T., & Lin, C. F. (2005). Mechanical properties of 304L stainless steel SMAW joints under dynamic impact loading. Journal of materials science, 40(18), 4839-4847. [CrossRef] [Google Scholar]
- Mishra, D., & Dakkili, M. (2020). Gas tungsten and shielded metal arc welding of stainless steel 310 and 304 grades over single and double ‘V’butt joints. Materials Today: Proceedings, 27, 772-776. [CrossRef] [Google Scholar]
- Patil, U. S., & Kadam, M. S. (2021). Microstructural analysis of SMAW process for joining stainless steel 304 with mild steel 1018 and parametric optimization by using response surface methodology. Materials Today: Proceedings, 44, 1811-1815. [CrossRef] [Google Scholar]
- Pargaonkar, H. M., & Kulkarni, S. R. (2018). Process parameter optimization for tensile strength for plasma arc welding of SS304. Int. J. Eng. Res. Technol., 7(03), 23-26 [CrossRef] [Google Scholar]
- Harish, T. M., Jerome, S., Yadukrishna, B., Kumar, R. S., Suresh, C. M., & Ramesh, K. (2019). Assessment of microstructure and mechanical properties of keyhole plasma arc welded similar butt joint of AISI 304 H austenitic stainless steel. Materials Research Express, 6(11), 1165b2. [CrossRef] [Google Scholar]
- Rajesh, K. D., Buddi, T., Kanth, P. R., & Satyanarayana, K. (2020). Microstructural and corrosion resistance study on plasma arc welded joints of AISI 304 and AISI 316. Advances in Materials and Processing Technologies, 6(2), 189-205. [CrossRef] [Google Scholar]
- Shanmugarajan, B., & Padmanabham, G. (2012). Fusion welding studies using laser on Ti–SS dissimilar combination. Optics and Lasers in Engineering, 50(11), 1621-1627. [CrossRef] [Google Scholar]
- Attar, M. A., Ghoreishi, M., & Beiranvand, Z. M. (2020). Prediction of weld geometry, temperature contour and strain distribution in disk laser welding of dissimilar joining between copper & 304 stainless steel. Optik, 219, 165288. [CrossRef] [Google Scholar]
- Rodrigues, L. A., Borges, D. J., Baia, P. E., Freitas, E. N., & Braga, E. M. (2019). Welding procedures influence analysis on the residual stress distribution and distortion of stiffened panels welded via robotized FCAW. Thin-Walled Structures, 141, 175-183. [CrossRef] [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.