Open Access
Issue |
E3S Web Conf.
Volume 431, 2023
XI International Scientific and Practical Conference Innovative Technologies in Environmental Science and Education (ITSE-2023)
|
|
---|---|---|
Article Number | 02012 | |
Number of page(s) | 9 | |
Section | Energy Technology and Energy Systems | |
DOI | https://doi.org/10.1051/e3sconf/202343102012 | |
Published online | 13 October 2023 |
- W. Grzesik, Advanced Machining Processes of Metallic Materials: Theory, Modelling, and Applications (Elsevier, Amsterdam, 2017). [Google Scholar]
- A. A. Ryzhkin, C. G. Shuchev, M.M. Klimov, Material cutting (DGTU Press, Rostov-on-Don, 2008). [Google Scholar]
- A.V. Chichinadze, C.G. Shuchev et al., J. of Fric. and Wear 7, 47–54 (1986). [Google Scholar]
- A. A. Ryzhkin, C.G. Shuchev, Model of the deformable surface layer of the workpiece for estimating the contact temperature of the tool, in Proceedings of International Conference Wplyw Technologii na stan warstwy wierzchniej, WW’99, 15-17 October, Lubniewice, Poland, (1999) [Google Scholar]
- A. A. Ryzhkin, C.G. Shuchev, Vestnik DGTU: Friction&Wear Series 3, 5–13 (2000). [Google Scholar]
- Y. Altintas and D. Aslan, CIRP Ann. 66, 349–352 (2017). [CrossRef] [Google Scholar]
- K.V. Patel, K. Jarosz and T. Özel, J. Manuf. Mater. Process. 5, 65 (2021). [Google Scholar]
- D. Botkina, M. Hedlind, B. Olsson, J. Hensera, T. Lundholma, Digital Twin of a Cutting Tool, in Proceedings of 51st International Conference on Manufacturing Systems, CIRP CMC, 16-18 May, Stockholm, Sweden (2018). [Google Scholar]
- S.K. Thangarasu, S. Shankar, T. Mohanraj and K. Devendran., J. Mech. Eng. Sci. 234, 329–342 (2020). [CrossRef] [Google Scholar]
- S. Dahbi, L. Ezzine and H. E. Moussami, Int. J. Eng. Bus. Manag. 9, 1–13 (2017). [Google Scholar]
- F. A. Niaki, A. Pleta and L. Mears, Int. J. Adv. Manuf. Technol. 97, 641–656. (2018). [CrossRef] [Google Scholar]
- H. Haken, Advanced Synergetics, (Springer, 1983). [Google Scholar]
- R. S. Hahn, On the Temperature Developed at the Shear Plane in the Metal Cutting Process, in Proceedings of 1th US National Congress of Applied Mechanic, NCAM, 4-6 November, Chicago, Illinois, USA (1951). [Google Scholar]
- B. T. Chao and K. J. Trigger, Trans. ASME 75, 109–120 (1953). [Google Scholar]
- A. O. Tay et al., Using the Finite Element Method to Determine Temperature Distributions in Orthogonal Machining, in Proceedings of Institute for Mechanical Engineering 188, 627–638 (1974). [Google Scholar]
- N. N. Zorev, Inter-Relationship between Shear Processes Occurring Along Tool Face and Shear Plane in Metal Cutting, in Proceedings of International Research in Production Engineering Proceedings, ASME, New York (1963). [Google Scholar]
- A.A. Elsadek et al., SN Appl. Sci. 2, 540 (2020). [CrossRef] [Google Scholar]
- Y. R. Bhoyar, Int. J. Eng. Res. Technol. 2, 901–906 (2013). [CrossRef] [Google Scholar]
- J.M. Rodríguez, J.M. Carbonell and P. Jonsén, Arch. Computat. Methods Eng. 27, 387–412 (2020). [CrossRef] [Google Scholar]
- V.L. Zakovorotny, V.E. Gvindjiliya, Metal Working and Material Science 21, 42–58 (2019). [CrossRef] [Google Scholar]
- D.M. D'Addona, S.J. Raykar, Materials 12, 408 (2019). [CrossRef] [PubMed] [Google Scholar]
- A. Thakare et al., Procedia CIRP 3, 234–239 (2015). [CrossRef] [Google Scholar]
- A. N. Beskopylny, E.V. Fominov et al., The influence of thermodynamical characteristics of high speed steels on temperature and forces values when turning construction steel, in Proceedings 8th International Conference Tribology for Mechanical Engineering-2020, 14-16 October, Moscow, Russia (2020) [Google Scholar]
- A. A. Ryzhkin, Thermophysical processes during wear of tool cutting materials, (DGTU Press, Rostov-on-Don, 2005). [Google Scholar]
- V.L. Zakovorotny and V.E. Gvindjiliya, Russ. Eng. Res. 38, 10, 818–823 (2018). [CrossRef] [Google Scholar]
- V.L. Zakovorotny, D. Pham and X. Nguyen, Vestnik DGTU 10, 8, 165–178 (2010). [Google Scholar]
- V.L. Zakovorotny, V.E. Gvindjiliya, Metal Working and Material Science 21, 4, 31–46 (2019). [CrossRef] [Google Scholar]
- M.F. Poletica, Contact loads on the cutting surfaces of the tool (Mechanical Engineering, Moscow, 1969). [Google Scholar]
- N.N. Zorev, Calculation of cutting force projections (Mechanical Engineering, Moscow, 1958). [Google Scholar]
- A.I. Belousov, Calculation of the friction temperature, in Theory of Friction and Wear-Collection of Articles (Sciense, Moscow, 1965). [Google Scholar]
- V.A. Kaminascas and A.A. Nemura, Statistical methods in the identification of dynamic systems (Vilnus, Ministis, 1975). [Google Scholar]
- S.S. Silin, The methods of similarity when machining (Mechanical Engineering, Moscow, 1979). [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.