Open Access
Issue
E3S Web Conf.
Volume 431, 2023
XI International Scientific and Practical Conference Innovative Technologies in Environmental Science and Education (ITSE-2023)
Article Number 02023
Number of page(s) 10
Section Energy Technology and Energy Systems
DOI https://doi.org/10.1051/e3sconf/202343102023
Published online 13 October 2023
  1. https://wwindea.org/world-market-for-wind-power-saw-another-record-year-in-2021-973-gigawatt-of-new-capacity-added/ (Last accessed 14.07.2023) [Google Scholar]
  2. S. H. Lundheim, G. Pellegrini-Masini, C. A. Klöckner, S. Geiss, Developing a Theoretical Framework to Explain the Social Acceptability of Wind Energy, Energies, 15, 4934 (2022) doi.org/10.3390/en15144934 [CrossRef] [Google Scholar]
  3. J. Li, Z. Li, Y. Wang, Optimal bidding strategy for day-ahead power market. In 2015 North American Power Symposium, NAPS 2015, 7335133, 2015 North American Power Symposium, NAPS 2015, Institute of Electrical and Electronics Engineers Inc. (2015) doi.org/10.1109/NAPS.2015.7335133 [Google Scholar]
  4. Z. Ullah, N. H. Mirjat, Virtual power plant: State of the art providing energy flexibility to local distribution grids. E3S Web Conf., 231, 01002 (2021) doi.org/10.1051/e3sconf/202123101002 [CrossRef] [EDP Sciences] [Google Scholar]
  5. J. C. Lopes, T. Sousa, Transmission system electromechanical stability analysis with high penetration of renewable generation and battery energy storage system application. Energies, 15, 2060 (2022) https://doi.org/10.3390/en15062060. [CrossRef] [Google Scholar]
  6. A. Keropyan, A. Gerasimova, K. Goloshapov, Influence of the track gradient on the contact temperature at the wheel-rail zone for open-pit locomotives MATEC Web of Conferences, 129, 06009 (2017) doi: 10.1051/matecconf/201712906009 [CrossRef] [EDP Sciences] [Google Scholar]
  7. A. N. Kobzar, Physical and methodological approach to the modern methods of the investigation of dental materials properties, Journal of Physics: Conference Series, 2056(1), 012061 (2021) doi:10.1088/1742-6596/2056/1/012061 [CrossRef] [Google Scholar]
  8. A. S. Shinkaryov, D. Y. Ozherelkov, I. A. Pelevin, S. A. Eremin, V. N. Anikin, M. A. Burmistrov, S. V. Chernyshikhin, A. A. Gromov, A. Y. Nalivaiko, Laser Fusion of Aluminum Powder Coated with Diamond Particles via Selective Laser Melting: Powder Preparation and Synthesis Description, Coatings, 10(1219), 11 (2021) doi: 10.3390/coatings11101219 [Google Scholar]
  9. I. V. Ushakov, V. A. Feodorov, I. J. Permyakova, Determination of plasticity of thermally treated metallic glass by U-method and microindentation, Proceedings of SPIE–The International Society for Optical Engineering, 5127, 246–251 (2002) doi: 10.1117/12.517988 [Google Scholar]
  10. I. V. Ushakov, How a crack and the defect material in its neighborhood affect the radiation strength of transparent materials. Journal of Optical Technology, 75(2), 128–131 (2008) doi: 10.1364/JOT.75.000128 [CrossRef] [Google Scholar]
  11. V. A. Fedorov, I. V. Ushakov, I. E. Permyakova, Mechanical properties and crystallization of an annealed cobalt-based amorphous alloy. Metally, 3, 108–113 (2004) doi: 10.1117/12.555528 [Google Scholar]
  12. N. N. Tatarnikov, V. S. Yusupov, B. F. Belelyubsky, Manufacturing of work-rolls with higher geometry and roughness requirements for rolling the thinnest strip, AIP Conference Proceedings, 2697, 030012 (2023) doi:10.1063/5.0135274. [CrossRef] [Google Scholar]
  13. D. E. Kaputkin, Reversible martensitic transformation, ageing and low-temperature tempering of iron-carbon martensite, Materials Science and Engineering: A., SPEC. ISS., 438-440, 207-211 (2006) doi: 10.1016/j.msea.2006.02.182. [CrossRef] [Google Scholar]
  14. S. V. Goryachev, A. A. Smolyakova, Problems and prospects of wind energy systems in Russia. Engineering, 5(119) (2022) doi.org/10.23670/IRJ.2022.119.5.048 [Google Scholar]
  15. O. V. Kryukov, A. V. Serebryakov, Energy efficient power supply systems of oil and gas pipelines electric drives. Bulletin of South Ural State University: Power Engineering, 17(3), 102–110 (2017) [Google Scholar]
  16. P. Starikov, A. Ionov, S. Seliverstov, I. Borovik, A. Matushkin, Mathematical Modeling of Heat Transfer Processes in a Wall with a Regular Pseudo-pore Structure. International Conference on Aerospace System Science and Engineering, 549, 155–168 (2018) doi:10.1007/978-981-13-6061-9_10 [Google Scholar]
  17. D. E. Kaputkin, V. N. Duradji, N. A. Kaputkina, Plasma electrolytic processing of bimetals at the anodic process, Letters on Materials, 11, 433–437 (2021) doi: 10.22226/2410-3535-2021-4-433-437 [CrossRef] [Google Scholar]
  18. I. S. Safronov, A. I. Ushakov, Targeted alternation in properties of solid amorphous-nanocrystalline material in exposing to nanosecond laser radiation, Defect and Diffusion Forum, 410, 469–474 (2021) doi:10.4028/www.scientific.net/DDF.410.469 [CrossRef] [Google Scholar]
  19. I. S. Safronov, A. A. Neplueva, I. V. Ushakov, Mechanical Properties of Laser Treated Thin Sample of an Amorphous-Nanocrystalline Metallic Alloy Depending on the Initial Annealing Temperature. Defect and Diffusion Forum. Defect and Diffusion Forum, 410, 489-494 (2021) doi:10.4028/www.scientific.net/DDF.410.489. [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.