EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 431 (2023) E3S Web Conf., 431 (2023) 06038 References
Open Access
Issue
E3S Web Conf.
Volume 431, 2023
XI International Scientific and Practical Conference Innovative Technologies in Environmental Science and Education (ITSE-2023)
Article Number 06038
Number of page(s) 13
Section Industrial Innovation and Decarbonization
DOI https://doi.org/10.1051/e3sconf/202343106038
Published online 13 October 2023
  1. Y. Tian, C. Chen, W. Duan, Intelligent robotic systems for structural health monitoring: Applications and future trends. Automation in Construction, 139 (2022) doi.org/10.1016/j.autcon.2022.104273 [CrossRef] [Google Scholar]
  2. B. Tao, Y. Feng, Y. Wu, Accuracy of dental implant surgery using dynamic navigation and robotic systems: An in vitro study, Journal of Dentistry, 123 (2022) doi.org/10.1016/j.jdent.2022.104170robotic [Google Scholar]
  3. Y. Tian, C. Chen, W. Duan, Intelligent robotic systems for structural health monitoring: Applications and future trends, Automation in Construction, 139 (2022) doi.org/10.1016/j.autcon.2022.104273 [CrossRef] [Google Scholar]
  4. X. Xu, Y. Chen, Y. Gong, Assignment of parcels to loading stations in robotic sorting systems, Transportation Research Part E: Logistics and Transportation Review, 164 (2022) doi.org/10.1016/j.tre.2022.102808 [Google Scholar]
  5. G. Boschetti, M. Faccio, R. Minto, 3D collision avoidance strategy and performance evaluation for human–robot collaborative systems, Computers & Industrial Engineering, 179 (2023) doi.org/10.1016/j.cie.2023.109225 [CrossRef] [Google Scholar]
  6. B. Lindqvist, S. Karlsson, G. Nikolakopoulos, Multimodality : Integrated combined legged-aerial mobility for subterranean search-and-rescue, Robotics and Autonomous Systems, 154 (2022) doi.org/10.1016/j.robot.2022.104134 [CrossRef] [Google Scholar]
  7. Yi Guo, R. G. Parker, Stiffness matrix calculation rolling bearings using a finite element/contact mechanics model, Mechanism and Machine Theory (2012) doi:10.1016/j.mechmachtheory.2011.12.006 [Google Scholar]
  8. I. Hoopert, J. Tribology, 136 (2014) [Google Scholar]
  9. P. R. N. Childs, Rolling Element Bearings, Mechanical Design (2021) [Google Scholar]
  10. P. Dewangan, A. Parey, M. Haddar, Dynamic characteristics of a wind turbine gearbox with amplitude modulation and gravity effect: Theoretical and experimental investigation, Mechanism and Machine Theory, 167 (2021) [Google Scholar]
  11. L. Liu, L. Zhu, X. Gou, Modeling and analysis of load distribution ratio and meshing stiffness for orthogonal spur-face gear drive under point contact, Mechanism and Machine Theory, 184 (2023) doi.org/10.1016/j.mechmachtheory.2023.105312 [Google Scholar]
  12. H.-G. Kim, R. Wiebe, Numerical investigation of stress states in buckled laminated composite plates under dynamic loading, Composite Structures, 235 (2020) doi.org/10.1016/j.compstruct.2019.111743 [Google Scholar]
  13. A. Vaibhav, A. Phadnis, V. Silberschmidt, Composites Under Dynamic Loads at High Velocities Comprehensive Composite Materials, Composite Materials, 8 (2018) [Google Scholar]
  14. A. Chao Correas, H. Ghasemnejad, Analytical development on impact behaviour of composite sandwich laminates by differentiated loading regimes, Aerospace Science and Technology, 126 (2022) doi.org/10.1016/j.ast.2022.1076581270-9638/ [CrossRef] [Google Scholar]
  15. E. J. Barbero. Finite Element Analysis of Composite Materials Using ANSYS (2013) [Google Scholar]
  16. O. G. Latyshev, A. B. Veremeychik, E. A. Zhukov Application of composite materials in stands for dynamic loading, Moscow, Publishing house of MSTU N.E. Bauman (2011) [Google Scholar]
  17. L. M. Gavva, V. V. Firsanov, Mechanics of Solids (Springer), 3 (2020) [Google Scholar]
  18. O. V. Mitrofanov, Natural and Technical Sciences, 2(153) (2021) [Google Scholar]
  19. V. V. Vasiliev, E. V. Morozov, Advanced Mechanics of Composite Materials and Structures, Elsevier (2018) [Google Scholar]
  20. A. Manes, A. Gilioli, C. Sbarufatti, M. Giglio, Experimental and numerical investigations of low velocity impact on sandwich panels, Compos., Struct. 99 (2013) doi.org/10.1016/j.compstruct.2012.11.031. [Google Scholar]
  21. O. C. Zienkiewicz, R. L. Taylor, J. Z. Zhu, Finite element method: its basis and fundamental, Butterworth-Heinemann, Oxford (2013) [Google Scholar]
  22. S. Moaveni, Finite Element Analysis Theory and Application with ANSYS, Pearson Education, London (2015) [Google Scholar]
  23. I. Koutromanos, Applied Fundamentals of Finite Element Analysis Linear Finite Element Analysis, John Wiley & Sons, New York (2018) [Google Scholar]
  24. K. J. Bathe, Finite element procedures, Pearson education Inc., New York (2006) [Google Scholar]
  25. A. Noman, M. Shohel, S. Gupta, Investigate the mechanical strength of laminated composite carbon fiber with different fiber orientations by numerically using finite element analysis, Material, Proceedings (2023) doi.org/10.1016/j.matpr.2023.02.132 [Google Scholar]
  26. J.-P. Lin, X. Liu, G. Wang, Static and dynamic analysis of three-layered partial-interaction composite structures, Engineering Structures, 252 (2021) doi.org/10.1016/j.engstruct.2021.113581 [Google Scholar]
  27. B. Zhang, J. Ge, J. Liang, Failure prediction for fiber reinforced polymer composites based on virtual experimental tests, Journal of Materials Research and Technology, 24 (2023) [Google Scholar]
  28. I. Daniel, Yield and failure criteria for composite materials under static and dynamic loading. Prog. Aero Sci, 81, 18e25 (2016) doi.org/10.1016/j.paerosci.2015.11.003. [CrossRef] [Google Scholar]
  29. J. Gu, P. Chen, L. Su, K. Li, A theoretical and experimental assessment of 3D macroscopic failure criteria for predicting pure inter-fiber fracture of transversely isotropic UD composites. Compos. Struct., 259 (2021) doi.org/10.1016/j.compstruct.2020.113466 [Google Scholar]
  30. Q. Sun, G. Zhou, Z. Meng, H. Guo, Z. Chen, H. Liu, H. Kang, S. Keten, X. Su, Failure criteria of unidirectional carbon fiber reinforced polymer composites informed by a computational micromechanics model. Compos Sci Technol., 172 (2019) doi.org/10.1016/j.compscitech.2019.01.012. [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.