Open Access
| Issue |
E3S Web Conf.
Volume 446, 2023
2nd International Conference on High-Speed Transport Development (HSTD 2023)
|
|
|---|---|---|
| Article Number | 03001 | |
| Number of page(s) | 8 | |
| Section | Design, Strength, New Materials | |
| DOI | https://doi.org/10.1051/e3sconf/202344603001 | |
| Published online | 10 November 2023 | |
- Bakulin V.N., Gribanov V.M. et al. (2008) Methods of optimal design and calculation of composite structures. In 2 vols. V.2. Mechanical action of X-ray radiation on thinwalled composite structures. Nauka, Moscow [Google Scholar]
- Bakulin V.N., Ostrik A.V. (2015) Complex effect of radiation and particles on thinwalled structures with heterogeneous coatings. Fizmatlit, Moscow. [Google Scholar]
- Gusev E.L., Bakulin V.N. (2022) Application of Modern Provisions of the Kinetic Theory of Strength for the Development of Generalized Models of Durability of Composites. Springer Aerospace Technology book series (SAT). Recent Developments in High-Speed Transport. P.219–227. [Google Scholar]
- Smerdov A.A., Son T.P. (2016) Comparative analysis of optimal composite multiwalled and sandwich shells for modules of launch vehicles and upper stages. Composite materials constructions 143: 58–65 [Google Scholar]
- Lopatin A.V., Khakhlenkova A.A. (2018) Finite Element Modeling of a Mesh Composite Coupling Section of a Spacecraft. Mech. Solids 53 : 435–439 [CrossRef] [Google Scholar]
- Bakulin V.N. (2020) Investigation of the Influence of the Cutout Dimensions on the Stress-strain State of Three-layer Shells with Load-bearing Layers of Composite Materials. Journal of Physics: Conference Series: Materials Science and Engineering 714: 012002 DOI: 10.1088/1757-899X/714/1/012002 [CrossRef] [Google Scholar]
- Testoedov N.A., Nagovitsin V.N., Permyakov M.Y. (2016) The use of sandwich honeycomb structures in spacecraft. Vestnik SibGAU 17: 200–211 [Google Scholar]
- Akimov D.V., Larionov I.F., Klimenko D.V. et al. (2019) Mathematical Modeling and Investigation of the Stress-Strain State of Compartments of Space Rockets. Kosmicheskaya Tekhnika. Raketnoe Vooruzhenie (Space Technology. Missile Armaments) 117: 21–27 [Google Scholar]
- Razin A.F. (2018) The Problem of Optimum Design of Composite Housings of Solid Propellant Rocket Engines,. Mech Solids 53; 418–426 [CrossRef] [Google Scholar]
- Azarov A.V. (2018) The problem of Designing Aerospace Mesh Composite Structures. Mech. Solids 53: 427–434 [CrossRef] [Google Scholar]
- Bakulin V.N., Nedbay A.Y. (2022) Parametric Resonance of a Three-Layer Cylindrical Composite Shell, Supported by Longitudinal Ribs and a Cylinder, Under The Action of a Time-Varying Axial Force. Doklady Physics 67: 209–214 [CrossRef] [Google Scholar]
- Bakulin V.N., Nedbay A.Y. (2021) The Dynamic Stability Of Three-Layered Cylindrical Shell, Reinforced Ring Ribs And Hollow Cylinder Under External Pressure Pulsing. Doklady Physics, 66: 175–181 [CrossRef] [Google Scholar]
- Gusev E.L., Bakulin V.N. (2022) Generalized durability models and their application to solving problems on predicting the defining characteristics of composites. Mechanics of Composite Materials. 58(3):355–364; DOI: 10.1007/s11029-022-10034-1 [CrossRef] [Google Scholar]
- Gusev E.L., Bakulin V.N. (2020) The use of generalized models in the variational formulation of the prediction tasks defining characteristics of composite materials. J. Phys. : Conf. Ser. Collection of Materials of the VIII Int. Conf. 1431: 012017. [Google Scholar]
- Gusev E.L., Bakulin V.N. (2018) Variation formulations of inverse problems in forecastting the residual life of composites. Doklady Physics 63: 388–392. [CrossRef] [Google Scholar]
- Gusev E.L., Bakulin V.N. (2021) Variational Methods of Solving Problems on Control of the Intensity of a Temperature Field. Journal of Engineering Physics and Thermophysics 94: 1117–1123 [CrossRef] [Google Scholar]
- Bakulin V.N., Ostrik A.V. (2014) The combined thermal and mechanical effect of radiation and shock waves on a multilayer orthotropic shell with a heterogeneous coating. J. Appl. Math. Mech. 78: 155–162 [CrossRef] [Google Scholar]
- Gusev E.L., Bakulin V.N. (2020) The use of generalized models in the variational formulation of the preiction tasks defining characteristics of composite materials. J. Phys.: Conf. Ser. Collection of Materials of the VIII Int. Conf. 1431: 012017 [Google Scholar]
- Urzhumtsev U.S., Chersky I.N. (1985) Scientific foundations of engineering climatology of polymer and composite materials. Mechanics of composite materials 4: 708–714 [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.