Open Access
Issue |
E3S Web Conf.
Volume 453, 2023
International Conference on Sustainable Development Goals (ICSDG 2023)
|
|
---|---|---|
Article Number | 01027 | |
Number of page(s) | 10 | |
DOI | https://doi.org/10.1051/e3sconf/202345301027 | |
Published online | 30 November 2023 |
- Moss, Miranda. “Power Harvest: Explorations in Regenerative Energy Technologies within the (post) Colonial Climate Emergency.” (2021). [Google Scholar]
- Bhukya, Muralidhar Nayak, and Venkata Reddy Kota. “A quick and effective MPPT scheme for solar power generation during dynamic weather and partial shaded conditions.” Engineering Science and Technology, an International Journal 22, no. 3 (2019): 869-884. [CrossRef] [Google Scholar]
- Srividhya, Dra. “Ecocriticism: Environment and Social Resistance in Literature.” Literature And Nature (2022): 171. [Google Scholar]
- Vaid, S. K., Kumar, B., Sharma, A., Shukla, A. K., & Srivastava, P. C. (2014). Effect of Zn solubilizing bacteria on growth promotion and Zn nutrition of rice. Journal of soil science and plant nutrition, 14(4), 889-910. [Google Scholar]
- Chauvin, Lucien O., ed. Education for the future: Environment and sustainable development in Peru. CIIR, 2000. [Google Scholar]
- Reed-Huff, LaVonda N. “Dirty dishes, dirty laundry, and windy mills: a framework for regulation of clean energy devices.” Envtl. L. 40 (2010): 859. [Google Scholar]
- Bernard, Taryn. “A critical analysis of corporate reports that articulate corporate social responsibility.” PhD diss., Stellenbosch: Stellenbosch University, 2015. [Google Scholar]
- Veleva, Vesela. “The role of entrepreneurs in advancing sustainable lifestyles: Challenges, impacts, and future opportunities.” Journal of Cleaner Production 283 (2021): 124658. [CrossRef] [PubMed] [Google Scholar]
- Agyabeng-Mensah, Yaw, Ebenezer Afum, and Esther Ahenkorah. “Exploring financial performance and green logistics management practices: examining the mediating influences of market, environmental and social performances.” Journal of cleaner production 258 (2020): 120613. [CrossRef] [Google Scholar]
- Kumar, P. Sai Shravan, and K. Viswanath Allamraju. “A review of natural fiber composites [Jute, Sisal, Kenaf].” Materials Today: Proceedings 18 (2019): 2556-2562. [CrossRef] [Google Scholar]
- Gulati, K., Boddu, R. S. K., Kapila, D., Bangare, S. L., Chandnani, N., & Saravanan, G. (2022). A review paper on wireless sensor network techniques in Internet of Things (IoT). Materials Today: Proceedings, 51, 161-165. [CrossRef] [Google Scholar]
- Govindan, Kannan, Hamed Soleimani, and Devika Kannan. “Reverse logistics and closed-loop supply chain: A comprehensive review to explore the future.” European journal of operational research 240, no. 3 (2015): 603-626. [CrossRef] [Google Scholar]
- Esmaeilian, Behzad, Sara Behdad, and Ben Wang. “The evolution and future of manufacturing: A review.” Journal of manufacturing systems 39 (2016): 79-100. [CrossRef] [Google Scholar]
- Sumanasuriya, Semini, and Johann De Bono. “Treatment of advanced prostate cancer—A review of current therapies and future promise.” Cold Spring Harbor perspectives in medicine 8, no. 6 (2018). [Google Scholar]
- Winter, Marc, and A. Michael Knemeyer. “Exploring the integration of sustainability and supply chain management: Current state and opportunities for future inquiry.” International journal of physical distribution & logistics management 43, no. 1 (2013): 18-38. [CrossRef] [Google Scholar]
- Gupta, Sudheer, and Omkar D. Palsule-Desai. “Sustainable supply chain management: Review and research opportunities.” IIMB Management review 23, no. 4 (2011): 234-245. [CrossRef] [Google Scholar]
- Basavapoornima, Ch, T. Maheswari, C. R. Kesavulu, W. Pecharapa, J. Kaewkhao, and C. K. Jayasankar. “Spectral characteristics of Pr3+-doped lead phosphate glasses for optical display device and gain media applications.” In AIP Conference Proceedings, vol. 2279, no. 1. AIP Publishing, 2020. [Google Scholar]
- Wang, Yacan, Vincent Wiegerinck, Harold Krikke, and Hongdan Zhang. “Understanding the purchase intention towards remanufactured product in closed-loop supply chains: An empirical study in China.” International Journal of Physical Distribution & Logistics Management 43, no. 10 (2013): 866-888. [CrossRef] [Google Scholar]
- Milios, Leonidas. “Advancing to a Circular Economy: three essential ingredients for a comprehensive policy mix.” Sustainability science 13, no. 3 (2018): 861-878. [CrossRef] [PubMed] [Google Scholar]
- Min, Hokey, and Ilsuk Kim. “Green supply chain research: past, present, and future.” Logistics Research 4 (2012): 39-47. [CrossRef] [Google Scholar]
- Vinoth, S., G. Kanimozhi, K. Hari Prasad, Kumar Harish, E. S. Srinadhu, and N. Satyanarayana. “Enhanced ionic conductivity of electrospun nanocomposite (PVDF‐HFP+ TiO2 nanofibers fillers) polymer fibrous membrane electrolyte for DSSC application.” Polymer Composites 40, no. 4 (2019): 1585-1594. [CrossRef] [Google Scholar]
- Collins, Francis S., Eric D. Green, Alan E. Guttmacher, Mark S. Guyer, and US National Human Genome Research Institute. “A vision for the future of genomics research.” nature 422, no. 6934 (2003): 835-847. [CrossRef] [PubMed] [Google Scholar]
- Henderson, Steven, and Steven Feiner. “Exploring the benefits of augmented reality documentation for maintenance and repair.” IEEE transactions on visualization and computer graphics 17, no. 10 (2010): 1355-1368. [Google Scholar]
- Yang, Yang, Junfeng Guan, Janet M. Nwaogu, Albert PC Chan, Hung-lin Chi, and Calvin WH Luk. “Attaining higher levels of circularity in construction: Scientometric review and cross-industry exploration.” Journal of Cleaner Production (2022): 133934. [CrossRef] [Google Scholar]
- Saxena, A., Prasad, D., Haldhar, R., Singh, G., & Kumar, A. (2018). Use of Sida cordifolia extract as green corrosion inhibitor for mild steel in 0.5 M H2SO4. Journal of environmental chemical engineering, 6(1), 694-700. [CrossRef] [Google Scholar]
- Kumari, Ch Usha, A. Sampath Dakshina Murthy, B. Lakshmi Prasanna, M. Pala Prasad Reddy, and Asisa Kumar Panigrahy. “An automated detection of heart arrhythmias using machine learning technique: SVM.” Materials Today: Proceedings 45 (2021): 1393-1398. [CrossRef] [Google Scholar]
- Okorie, Okechukwu, Martins Obi, Jennifer Russell, Fiona Charnley, and Konstantinos Salonitis. “A triple bottom line examination of product cannibalisation and remanufacturing: A review and research agenda.” Sustainable Production and Consumption 27 (2021): 958-974. [CrossRef] [Google Scholar]
- Monyaki, Nthabeleng Caroline. “The exploration of remanufacturing and upcycling in the Cape Town fashion manufacturing industry.” PhD diss., Cape Peninsula University of Technology, 2022. [Google Scholar]
- Raj, I. Loyola Poul, S. Valanarasu, K. Hariprasad, Joice Sophia Ponraj, N. Chidhambaram, V. Ganesh, H. Elhosiny Ali, and Yasmin Khairy. “Enhancement of optoelectronic parameters of Nd-doped ZnO nanowires for photodetector applications.” Optical Materials 109 (2020): 110396. [CrossRef] [Google Scholar]
- Wieser, Harald, and Nina Tröger. “Exploring the inner loops of the circular economy: Replacement, repair, and reuse of mobile phones in Austria.” Journal of Cleaner Production 172 (2018): 3042-3055 [CrossRef] [Google Scholar]
- Saggu, S., Sakeran, M. I., Zidan, N., Tousson, E., Mohan, A., & Rehman, H. (2014). Ameliorating effect of chicory (Chichorium intybus L.) fruit extract against 4-tert-octylphenol induced liver injury and oxidative stress in male rats. Food and chemical toxicology, 72, 138-146. [CrossRef] [PubMed] [Google Scholar]
- Kandhare, Amit D., Prasad A. Thakurdesai, Pralhad Wangikar, and Subhash L. Bodhankar. “A systematic literature review of fenugreek seed toxicity by using ToxRTool: evidence from preclinical and clinical studies.” Heliyon 5, no. 4 (2019). [Google Scholar]
- Sharma, Vijay Kumar, Pankaj Chandna, and Arvind Bhardwaj. “Green supply chain management related performance indicators in agro industry: A review.” Journal of cleaner production 141 (2017): 1194-1208. [CrossRef] [Google Scholar]
- Awasthi, Ankita, Kuldeep K. Saxena, and Vanya Arun. “Sustainability and survivability in manufacturing sector.” In Modern Manufacturing Processes, pp. 205-219. Woodhead Publishing, 2020. [CrossRef] [Google Scholar]
- Korpi, Alireza Grayeli, Ştefan Ţălu, Mirosław Bramowicz, Ali Arman, Sławomir Kulesza, Bartosz Pszczolkowski, Stanislav Jurečka et al. “Minkowski functional characterization and fractal analysis of surfaces of titanium nitride films.” Materials Research Express 6, no. 8 (2019): 086463. [CrossRef] [Google Scholar]
- Saxena, K. K., Srivastava, V., & Sharma, K. (2012). Calculation of Fundamental Mechanical Properties of Single Walled Carbon Nanotube using Non-local Elasticity. Advanced Materials Research, 383, 3840-3844. [Google Scholar]
- Srivastava, Samir K. “Green supply‐chain management: a state‐of‐the‐art literature review.” International journal of management reviews 9, no. 1 (2007): 53-80. [CrossRef] [Google Scholar]
- Markley, Melissa J., and Lenita Davis. “Exploring future competitive advantage through sustainable supply chains.” International Journal of Physical Distribution & Logistics Management 37, no. 9 (2007): 763-774. [CrossRef] [Google Scholar]
- Cattolica, Diego. “Advancing the circular economy: Exploring landscape and developments for circular public procurement in Sweden and Scotland.” IIIEE Master Thesis (2018). [Google Scholar]
- Prabhakar, P. K., Prasad, R., Ali, S., & Doble, M. (2013). Synergistic interaction of ferulic acid with commercial hypoglycemic drugs in streptozotocin induced diabetic rats. Phytomedicine, 20(6), 488-494. [CrossRef] [PubMed] [Google Scholar]
- Roy, Rajkumar, Rainer Stark, Kirsten Tracht, Shozo Takata, and Masahiko Mori. “Continuous maintenance and the future–Foundations and technological challenges.” Cirp Annals 65, no. 2 (2016): 667-688. [CrossRef] [Google Scholar]
- Wakkary, Ron, Audrey Desjardins, Sabrina Hauser, and Leah Maestri. “A sustainable design fiction: Green practices.” ACM Transactions on Computer-Human Interaction (TOCHI) 20, no. 4 (2013): 1-34. [CrossRef] [Google Scholar]
- Hazen, Benjamin T., Diane A. Mollenkopf, and Yacan Wang. “Remanufacturing for the circular economy: An examination of consumer switching behavior.” Business Strategy and the Environment 26, no. 4 (2017): 451-464. [CrossRef] [Google Scholar]
- Ferrer, Geraldo, and Jayashankar M. Swaminathan. “Managing new and remanufactured products.” Management science 52, no. 1 (2006): 15-26. [CrossRef] [Google Scholar]
- Pon, V. Doni, KS Joseph Wilson, K. Hariprasad, V. Ganesh, H. Elhosiny Ali, H. Algarni, and I. S. Yahia. “Enhancement of optoelectronic properties of ZnO thin films by Al doping for photodetector applications.” Superlattices and Microstructures 151 (2021): 106790. [CrossRef] [Google Scholar]
- Esmaeilian, Behzad, Joe Sarkis, Kemper Lewis, and Sara Behdad. “Blockchain for the future of sustainable supply chain management in Industry 4.0.” Resources, Conservation and Recycling 163 (2020): 105064. [CrossRef] [Google Scholar]
- Awasthi, Ankita, Kuldeep K. Saxena, and Vanya Arun. “Sustainable and smart metal forming manufacturing process.” Materials Today: Proceedings 44 (2021): 2069-2079. [CrossRef] [Google Scholar]
- Kalpana, G., Puligadda Veereswara Kumar, Shadi Aljawarneh, and R. V. Krishnaiah. “Shifted adaption homomorphism encryption for mobile and cloud learning.” Computers & Electrical Engineering 65 (2018): 178-195. [CrossRef] [Google Scholar]
- Saxena, K. K., & Lal, A. (2012). Comparative Molecular Dynamics simulation study of mechanical properties of carbon nanotubes with number of stone-wales and vacancy defects. Procedia Engineering, 38, 2347-2355. [CrossRef] [Google Scholar]
- Lopes de Sousa Jabbour, Ana Beatriz, Charbel Jose Chiappetta Jabbour, Moacir Godinho Filho, and David Roubaud. “Industry 4.0 and the circular economy: a proposed research agenda and original roadmap for sustainable operations.” Annals of Operations Research 270 (2018): 273-286. [CrossRef] [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.