Open Access
Issue
E3S Web Conf.
Volume 453, 2023
International Conference on Sustainable Development Goals (ICSDG 2023)
Article Number 01046
Number of page(s) 11
DOI https://doi.org/10.1051/e3sconf/202345301046
Published online 30 November 2023
  1. Khundrakpam, Nimo Singh, Gurinder Singh Brar, and Maibam Bindya Devi. “Optimizing the process parameters of ECM using Taguchi method.” Materials Today: Proceedings 26 (2020): 1373-1379. [CrossRef] [Google Scholar]
  2. Rajesh, S., Gobikrishnan, U., Rao, N. K., Balamurugan, R., Senthilkumar, K., Selvan, T. A., and Madhankumar, S. “Electrochemical machining of aluminium 7075 alloy, silicon carbide, and fly ash composites: an experimental investigation of the effects of variables on material removal rate.” Materials Today: Proceedings 62 (2022): 863867. [Google Scholar]
  3. Saravanan, S., Ravichandran, M., Stalin, B., Saravanavel, S., and Sukumar, S. “Optimization of process parameters of electrochemical machining of TiC-reinforced AA6063 composites.” Advances in Manufacturing Technology: Select Proceedings of ICAMT 2018. Springer Singapore, 2019. [Google Scholar]
  4. Tsai, Te Hui, Ming Yuan Lin, and Wei Lun Huang. “The optimization of parameters using Taguchi-method in through-mask electrochemical machining.” Sādhanā 46 (2021): 1-7. [Google Scholar]
  5. Rao, Sadineni Rama, and G. Padmanabhan. “Parametric optimization in electrochemical machining using utility based Taguchi method.” Journal of Engineering Science and Technology 10.1 (2015): 81-96. [Google Scholar]
  6. Charak, Abhishek, and Jawalkar, C. S. “A theoretical analysis on electro chemical discharge machining using Taguchi method.” Journal of Physics: Conference Series. Vol. 1240. No. 1. IOP Publishing, 2019. [Google Scholar]
  7. Dubey, A. K. “Multi-response optimization of electro-chemical honing using utility-based Taguchi approach.” The International Journal of Advanced Manufacturing Technology 41 (2009): 749-759. [CrossRef] [Google Scholar]
  8. Liu, Shoufa, Thangamani, Geethapriyan, Thangaraj, Muthuramalingam, and Karmiris-Obratański, Panagiotis. “Recent trends on electro chemical machining process of metallic materials: a review.” Archives of Civil and Mechanical Engineering 23, no. 3 (2023): 158. [CrossRef] [Google Scholar]
  9. Soni, S. K., and Thomas, B. “A comparative study of electrochemical machining process parameters by using GA and Taguchi method.” IOP Conference Series: Materials Science and Engineering. Vol. 263. No. 6. IOP Publishing, 2017. [Google Scholar]
  10. Panda, Surya Narayan, Bagal, Dilip Kumar, Pattanaik, Ajit kumar, Patnaik, Dulu, Barua, Abhishek, Jeet, Siddharth, Parida, Biswajit, and Naik, Bibekananda. “Comparative evaluation for studying the parametric influences on quality of electrode using Taguchi method coupled with MOORA, DFA, and TOPSIS method for electrochemical machining.” In Recent Advances in Mechanical Infrastructure: Proceedings of ICRAM 2019, pp. 115-129. Springer Singapore, 2020. [Google Scholar]
  11. Gautam, Nipun, Goyal, Ashish, Sharma, ShyamSunder, Oza, Ankit D., and Kumar, Rakesh. “Study of various optimization techniques for electric discharge machining and electrochemical machining processes.” Materials Today: Proceedings 57 (2022): 615-621. [CrossRef] [Google Scholar]
  12. Kasdekar, Dinesh Kumar, Parashar, Vishal, and Arya, Chandan. “Artificial neural network models for the prediction of MRR in Electro-chemical machining.” Materials Today: Proceedings 5.1 (2018): 772-779. [CrossRef] [Google Scholar]
  13. Abdullah, Mostafa Adel, Aghdeab, Shukry Hammed, and Ghazi, Safaa Kadhim. “Optimization of Surface Roughness For Al-alloy in Electro-chemical Machining (ECM) Using Taguchi Method.” Journal of Engineering 23.10 (2017): 62-71. [CrossRef] [Google Scholar]
  14. Das, Partha Protim, and Chakraborty, Shankar. “Parametric optimization of electrochemical machining process using Taguchi method and super ranking concept while machining on Inconel 825.” Advanced Engineering Optimization Through Intelligent Techniques: Select Proceedings of AEOTIT 2018. Springer Singapore, 2020. [Google Scholar]
  15. Tiwari, Abhishek, Mandal, Amitava, and Kumar, Kaushik. “Multi-objective optimization of electro-chemical machining by non-dominated sorting genetic algorithm.” Materials Today: Proceedings 2.4-5 (2015): 2569-2575. [CrossRef] [Google Scholar]
  16. Prayogo, Galang Sandy, and Lusi, Nuraini. “Determining the effect of machining parameters on material removal rate of AISI D2 tool steel in electrochemical machining process using the Taguchi method.” IOP Conference Series: Materials Science and Engineering. Vol. 494. No. 1. IOP Publishing, 2019. [Google Scholar]
  17. Das, Milan Kumar, Kumar, Kaushik, Barman, Tapan Kr, and Sahoo, Prasanta. “Optimization of surface roughness and MRR in electrochemical machining of EN31 tool steel using grey-Taguchi approach.” Procedia materials science 6 (2014): 729-740. [CrossRef] [Google Scholar]
  18. Jeykrishnan, J., Ramnath, B. Vijaya, Elanchezhian, C., and Akilesh, S. “Parametric analysis on Electro-chemical machining of SKD-12 tool steel.” Materials Today: Proceedings 4, no. 2 (2017): 3760-3766. [CrossRef] [Google Scholar]
  19. Jeykrishnan, J., Ramnath, B. Vijaya, Elanchezhian, C., and Akilesh, S. “Optimization of process parameters in Electro-chemical machining (ECM) of D3 die steels using Taguchi technique.” Materials Today: Proceedings 4, no. 8 (2017): 7884-7891. [CrossRef] [Google Scholar]
  20. Tiwari, Abhishek, Mandal, Amitava, and Kumar, Kaushik. “Optimization of overcut in electrochemical machining for EN 19 tool steel using Taguchi approach.” Materials Today: Proceedings 2.4-5 (2015): 2337-2345. [CrossRef] [Google Scholar]
  21. Selvan, T. A., Kotha, M.N.V.S.A. Sivaram, Chinamilli, N.V.S. Swamy, Dattatreya, G.S. Guru, Rajesh, S., Akshey, P. B., and Madhankumar, S. “Taguchi-based grey relational study for multiple criterion optimization on process variables for micro Electro-chemical Machining of Inconel Super-alloy.” Materials Today: Proceedings 62 (2022): 882-888. [CrossRef] [Google Scholar]
  22. Daniel, S. Ajith Arul, Ananth, S. Vijay, Parthiban, A., and Sivaganesan, S. “Optimization of machining parameters in electro chemical machining of Al5059/SiC/MoS2 composites using taguchi method.” Materials Today: Proceedings 21 (2020): 738-743. [CrossRef] [Google Scholar]
  23. Goutam, Rohit Kumar. “Optimization and experimental investigation on EN19 using hexagonal shaped electrode in ECM.” PhD diss., 2012. [Google Scholar]
  24. Zavadskas, Edmundas Kazimieras, Turskis, Zenonas, Antucheviciene, Jurgita, and Zakarevicius, Algimantas. “Optimization of weighted aggregated sum product assessment.” Elektronika ir elektrotechnika 122, no. 6 (2012): 3-6. [CrossRef] [Google Scholar]
  25. Kumari, Kanchan, Pradhan, Swastik, Barua, Abhishek, Mohanty, Sagar, Parida, Satyajit, Behera, Pravanjan, and Rath, Satyaranjan. “Parametric optimization of dry-turning of Nickel-Chromoly steel with various cutting tool using WASPAS method.” Materials Today: Proceedings (2023). [Google Scholar]
  26. Sahoo, Bibhuti Bhusan, Jena, Shakti Prakash, Barua, Abhishek, Jeet, Siddharth, Kumari, Kanchan, Bagal, Dilip Kumar, and Saran, Madhumanjari. “Parametric Appraisal of Mahua Biodiesel-Powered Compression Ignition Engine to Improve Performance Characteristics by RSM Coupled WASPAS Simulated Annealing and Genetic Algorithm.” In International Conference on Recent Advances in Mechanical Engineering Research and Development, pp. 505-513. Singapore: Springer Nature Singapore, 2022. [Google Scholar]
  27. Kandi, Bibhu Prasad, Jeet, Siddharth, Bagal, Dilip Kumar, Barua, Abhishek, Bhoi, Sandeep, and Mahapatra, Siba Sankar. “Mechanical characterization of quenched hardened chromoly steel using taguchi coupled WASPAS method.” Materials Today: Proceedings 50 (2022): 2321-2327. [CrossRef] [Google Scholar]
  28. Malik, Soubhagya, Jeet, Siddharth, Bagal, Dilip Kumar, Nayak, Rajendra Prasad, Barua, Abhishek, and Mahapatra, Siba Sankar. “Parametric appraisal of collapsibility and core shrinkage of phenol binded unbaked casting moulds using Taguchi-Sunflower optimization algorithm.” Materials Today: Proceedings 50 (2022): 1138-1144. [CrossRef] [Google Scholar]
  29. Jena, Sourav, Jeet, Siddharth, Bagal, Dilip Kumar, Baliarsingh, Asini Kumar, Nayak, Dillip Ranjan, and Barua, Abhishek. “Efficiency analysis of mechanical reducer equipment of material handling industry using sunflower optimization algorithm and material generation algorithm.” Materials Today: Proceedings 50 (2022): 1113-1122. [CrossRef] [Google Scholar]
  30. Gomes, Guilherme Ferreira, da Cunha, Sebastiao Simões, Ancelotti, Antonio Carlos. “A sunflower optimization (SFO) algorithm applied to damage identification on laminated composite plates.” Engineering with Computers 35 (2019): 619-626. [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.