EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 457 (2023) E3S Web Conf., 457 (2023) 01011 References
Open Access
Issue
E3S Web Conf.
Volume 457, 2023
International Scientific and Practical Symposium “The Future of the Construction Industry: Challenges and Development Prospects” (FCI-2023)
Article Number 01011
Number of page(s) 10
Section Modern Building Materials
DOI https://doi.org/10.1051/e3sconf/202345701011
Published online 05 December 2023
  1. Kolesnikov, A.I. Analysis of the history of high-rise construction in the world / A.I. Kolesnikov. - Text: direct // Young scientist. - 2020. - No. 6 (296). — S. 61–65. — URL : https://moluch.ru/archive/296/67212/. [Google Scholar]
  2. Pacillo G.A., Ranocchiai G., Loccarini F., Fagone M. Additive manufacturing in construction: A review on technologies, processes, materials, and their applications of 3D and 4D printing. Mat Design Process Comm. 2021;1–7. https://doi.org/10.1002/mdp2.253 [Google Scholar]
  3. Shelyuto T.Yu., Pol I.A., Shestov I.O. Modern panel housing construction: past, present, future // Synergy of Sciences. 2017. No. 10. - P. 550–556 - URL: http://synergy-journal.ru/archive/article0422 [Google Scholar]
  4. D. Lee, H. Kim, J. Sim, D. Lee, H. Cho, and D. Hong, “Trends in 3D printing technology for construction automation using text mining,” International Journal of Precision Engineering and Manufacturing, vol. 20, no. 5, pp. 871–882, 2019. https://doi.org/10.1007/s12541-019-00117-w [CrossRef] [Google Scholar]
  5. Gladysheva Tamara Viktorovna, Gladyshev Nikolay Fedorovich, Dvoretsky Stanislav Ivanovich, Gatapova Natalya Tsibikovna, Suvorova Yulia Alexandrovna Composite nanostructured sorbents for air regeneration and purification systems of inhabited objects // Bulletin of the TSTU. 2015. X°3. URL: https://cyberleninka.ru/article/n/kompozitsionnye-nanostrukturirovannye-sorbenty-dlya-sistem-regeneratsii-i-ochistki-vozduha-obitaemyh-obektov. [Google Scholar]
  6. Sagaydak, D. G. The use of additive technologies in the construction industry / D.G. Sagaydak. - Text: direct // Young scientist. - 2020. - No. 13 (303). - S. 47–50. - URL: https://moluch.en/archive/303/68428/ [Google Scholar]
  7. Rael R., Fratello VS Printing Architecture: Innovative Recipes for 3D Printing. New York: Princeton Architectural Press. - 2017. - 176 p. [Google Scholar]
  8. Osmanov S.G., Kolotienko M.A. On the question of the possibilities and scope of rational application of 3D printing technology for building structures // IVD. 2019. No. [Google Scholar]
  9. URL: https://cyberleninka.ru/article/n/k-voprosu-o-vozmozhnostyah-i-oblasti-ratsionalnogo-primeneniya-tehnologii-3d-pechati-stroitelnyh-konstruktsiy. [Google Scholar]
  10. Slavcheva G.S. Construction 3D printing today: potential, problems and prospects for practical implementation // Construction materials. 2021. No. 5. pp. 28–36. DOI: https://doi.org/10.31659/0585-430X-2021-791-5-28-36 [Google Scholar]
  11. Titov G.A. Materials for additive technologies in construction // Engineering Research. 2022. No. 3 (8). pp. 38–49. [Google Scholar]
  12. Kolesnikov A.G. — Modernization of the design of the construction 3D printer extruder and selection of compositions for it // Urbanistics. - 2019. - No. 2. DOI: 10.7256/2310-8673.2019.2.29597 URL: https://nbpublish.com/library_read_article.php?id=29597 [Google Scholar]
  13. Structural composite materials based on anthropogenic raw stuff and clinkerless binders of alkaline tempering / Y.M. Bazhenov, M.S. Salamanova, S.A.Y. Murtazaev, M.S. Mintsaev // Rasayan Journal of Chemistry. - 2021. - Vol. 14, No. 1. - P 409–423. DOI: 10.31788/RJC.2021.1415850 [CrossRef] [Google Scholar]
  14. Zagorodnyuk, L.Kh. Composite binders for 3D additive technologies / L.Kh. Zagorodnyuk, M.Yu. Elistratkin, D.S. Podgorny, Al Mamuri Saad Khalil Shadid. - DOI: https://doi.org/10.26518/2071-7296-2021-18-4-428-439 // Vestnik SibADI . - 2021. - T. 18, No. 4 (80). - S. 428–439. [CrossRef] [Google Scholar]
  15. Bondarev B.A., Bayazov V.A., Korneev O.O., Vostrikov I.A., Meshcheryakov A.A., Korneeva A.O. (2021). Selection of mixtures for 3D printing. The Eurasian Scientific Journal, [online] 3(13). Available at: https://esj.today/PDF/29SAVN321.pdf (in Russian) DOI: 10.15862/29SAVN321 [Google Scholar]
  16. Inozemtcev A.S., Korolev E.V., Duong Thanh Qui. Analiz suschestvuyuschikh technological resheniy 3D-printing v stroitel'stve [Analysis of existing technological solutions of 3D-printing in construction]. Vestnik MGSU [ Proceedings] of the Moscow State university of civil Engineering ]. 2018, vol. 13, issue 7(118), pp. 863–876. DOI: 10.22227/1997-0935.2018.7.863-876 [Google Scholar]
  17. Demyanenko Olga Viktorovna, Kopanitsa Natalya Olegovna, Sorokina Ekaterina Aleksandrovna The influence of the addition of thermally modified peat on the technological properties of building mixtures for 3D printing // Bulletin of TGASU. 2018. No. 4. URL: https://cyberleninka.ru/article/n/vliyanie-dobavki-termomodifitsirovannogo-torfa-na-tehnologicheskie-svoystva-stroitelnyh-smesey-dlya-3d-pechati. [Google Scholar]
  18. Mukhametrahimov R.Kh., Lukmanova L.V. Influence of Portland cements with different mineralogical composition on the main properties of composites formed by layer-by-layer extrusion (3D printing) // Izvestiya KGASU. 2021. No. 2 (56). pp. 37–50. DOI: 10.52409/20731523_2021_2_37. [Google Scholar]
  19. Kobzev D.O., Korneeva A.O. Building mixtures based on a composite binder from finely dispersed wastes of the local industry // Modern problems of construction science: Sat. International scientific- practical. conf. - 2017. - S. 98–100. [Google Scholar]
  20. Zagorodniuk L.Kh., Okuneva G.L. Analysis of the quality of mixing dry building mixtures in various mixing devices by a statistical method // Bulletin of BSTU named after V G. Shukhov. 2014. No. 5. URL: https://cyberleninka.rU/article/n/analiz-kachestva-smesheniya-suhih-stroitelnyh-smesey-v-razlichnyh-smesitelnyh-apparatah-statisticheskim-method. [Google Scholar]
  21. Katpin D.E. Investigation of methods for increasing the frost resistance of heavy concrete // Theory and practice of modern science. 2023. No. 4 (94). URL: https://cyberleninka.rU/article/n/issledovanie-metodov-povysheniya-morozostoykosti-tyazhelyh-betonov. [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.