Open Access
| Issue |
E3S Web of Conf.
Volume 458, 2023
International Scientific Conference Energy Management of Municipal Facilities and Environmental Technologies (EMMFT-2023)
|
|
|---|---|---|
| Article Number | 02005 | |
| Number of page(s) | 7 | |
| Section | Material Physics and Chemistry, Carbon Footprint of Materials | |
| DOI | https://doi.org/10.1051/e3sconf/202345802005 | |
| Published online | 07 December 2023 | |
- N. Mendes, P. Neto, A. Loureiro, A.P. Moreira, Machines and control systems for friction stir welding: A review, Mater. Des., 90, 256–265 (2016) [CrossRef] [Google Scholar]
- M.V. Glazo, A.V.Khvan, V.S. Zolotorevsky, N.A. Belov, Structure and Microstructure of Aluminum Alloys in As-Cast State. Cast. Aluminum Alloys, 133–234 (2019) [Google Scholar]
- K. Singh, G. Singh, H. Singh, Review on friction stir welding of magnesium alloys, J. Magnes. Alloy, 6(4), 399–416 (2018) [CrossRef] [Google Scholar]
- M. Kumar, A. Das, R. Ballav, Influence of interlayer on microstructure and mechanical properties of friction stir ,welded dissimilar joints: A review, Materials Today: Proceedings, 26, 2123–2129 (2020) [CrossRef] [Google Scholar]
- T. Tanaka, T. Morishige, T. Hirata, Comprehensive analysis of joint strength for dissimilar friction stir welds of mild steel to aluminum alloys. Scr Mater, 61, 756–759 (2009) [CrossRef] [Google Scholar]
- X. Kar, S.K. Choudhury, S. Suwas, S.V. Kailas, Effect of niobium interlayer in dissimilar friction stir welding of aluminum to titanium, Mater. Charact., 145, 402–412 (2018) [CrossRef] [Google Scholar]
- N. Gotawala, A. Shrivastava, Analysis of material distribution in dissimilar friction stir welded joints of Al 1050 and copper, J. of Manufacturing Processes, 57, 725–736 (2020) [CrossRef] [Google Scholar]
- N. Sharma, Z.A. Khan, A. N. Siddiquee, Friction stir welding of aluminum to copper—An overview, Trans. Nonferrous Met. Soc. China, 27, 2113−2136 (2017) [CrossRef] [Google Scholar]
- H. Esmaeili, G.M. Besharati, R.H. Zareie, Experimental investigation of material flow and welding defects in friction stir welding of aluminum to brass, J. Materials and Manufacturing Processes, 27(12), 1402−1408(2012) [CrossRef] [Google Scholar]
- H.T. Elmetwally, H.N. SaadAllah, M.S. Abd-Elhady, R.K. Abdel-Magied, Optimum combination of rotational and welding speeds for welding of Al/Cu-butt joint by friction stir welding, Published online: 11 August 2020 The International J. of Advanced Manufacturing Technology, 110, 163–175 (2020) [Google Scholar]
- Z.L. Hu, M.L. Dai, Q. Pang, Influence of Welding Combined Plastic Forming on Microstructure Stability and Mechanical Properties of Friction Stir-Welded Al-Cu Alloy, JMEPEG, 27, 4036–4042 (2018) [CrossRef] [Google Scholar]
- D. Venkateswarlu, M. Cheepu, B. K. Kumar, M. M. Mahapatra, Analysing the Friction Stir Welded Joints of AA2219 Al-Cu Alloy in Different Heat-Treated-State, IOP Conf. Series: Materials Science and Engineering, 330, 012074 (2018) [CrossRef] [Google Scholar]
- T. Medhi, M. K. Yadava, B. S. Roy, S.C. Saha, An experimental investigation on implications of traverse speed in joining of dissimilar Al–Cu by friction stir welding, The International Journal of Advanced Manufacturing Technology, 104, 1461–1471 (2019) [CrossRef] [Google Scholar]
- W. Zhang, Y. Shen, Y. Yan, R. Guo, W. Guan, G. Guo, Microstructure characterization and mechanical behavior of dissimilar friction stir welded Al/Cu couple with different joint configurations, Int J Adv. Manuf. Technol., 94, 1021–1030 (2018) [CrossRef] [Google Scholar]
- C.W. Tan, Z.G. Jiang, Y.B. Chen, X.Y. Chen, Microstructural evolution and mechanical properties of dissimilar Al-Cu joints produced by friction stir welding. Mater Des, 51, 466–473 (2013) [CrossRef] [Google Scholar]
- R. Beygi, M. Kazeminezhad, G. Eisaabadi, A. Loureiro, Friction stir butt welding of Al-Cu bilayer laminated composites: analysis of force, torque, and temperature, Int J Adv Manuf Technol, 88, 393–400 (2017) [CrossRef] [Google Scholar]
- A.A. Chularis, R.A. Rzaev, Sundetov M.Kh., Friction stir welding of aluminum and copper alloys, Welding production, 1, 10-23 (2019) [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.