EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 458 (2023) E3S Web of Conf., 458 (2023) 02015 References
Open Access
Issue
E3S Web of Conf.
Volume 458, 2023
International Scientific Conference Energy Management of Municipal Facilities and Environmental Technologies (EMMFT-2023)
Article Number 02015
Number of page(s) 9
Section Material Physics and Chemistry, Carbon Footprint of Materials
DOI https://doi.org/10.1051/e3sconf/202345802015
Published online 07 December 2023
  1. M. Renaud, M. Rueff, A.C. Rocaboy, Mechanical behaviour of saturated wood under compression, Wood Sci. Technol. (1996) [Google Scholar]
  2. A.G. Ward, The mechanical properties of leather, Rheol. Acta 1974 [Google Scholar]
  3. R.J. Santos, D.L.S. Agostini, et.al., Recycling leather waste: Preparing and studying on the microstructure, mechanical, and rheological properties of leather waste/rubber composite Polym. Compos. (2015) [Google Scholar]
  4. A.T. Amanov, G.A. Bahadirov, G.N. Tsoy, A.M. Nabiev, The Improvement of the Rheological Model of Leather Int. J. Adv. Sci. Eng. Inf. Technol. (2023) [Google Scholar]
  5. A.T. Amanov, G.A. Bahadirov, A.M. Nabiev, A Study on the Pressure Mechanism Improvement of a Roller-Type Machine Working Bodies, Materials (Basel) (2023) [Google Scholar]
  6. A.T. Amanov, G.A. Bahadirov, G.N. Tsoy, A.M. Nabiev, Improvement of the Process of Mechanical Dehydration of Five-Layer Semi-finished Wet Leather Products, Text. Leather Rev. (2021) [Google Scholar]
  7. A.T. Amanov, et.al., Effect of Multilayer Processing of Semi-finished Leather Products Int. J. Mech. Eng. Robot. Res. (2022) [Google Scholar]
  8. Z. Rakhimova, et.al., Roller Machine for Mechanical Processing of Semi-finished Leather Products AIP Conference Proceedings (2022) [Google Scholar]
  9. G. Bahadirov, et.al., East.-Eur. J. of Enterprise Techn. 2(1(122), 62–72 (2023). https://doi.org/10.15587/1729-4061.2023.277393 [CrossRef] [Google Scholar]
  10. G.A. Bahadirov, A.M. Nabiev, A.A. Umarov, G.N. Tsoy, E3S Web of Conf. Volume 389 (2023). https://doi.org/10.1051/e3sconf/202338901028 [CrossRef] [EDP Sciences] [Google Scholar]
  11. G.A. Bahadirov, G.N. Tsoy, A.M. Nabiev, E3S Web of Conf. 402 (2023). https://doi.org/10.1051/e3sconf/202340210016 [CrossRef] [EDP Sciences] [Google Scholar]
  12. T.Y. Amanov, S.D. Baubekov, G.N. Tsoy, A.M. Nabiev, Device for Providing Pressure Force between Working Bodies of Roller Technological Machines. Mod - High-Tech Technol (2018) [Google Scholar]
  13. G. Bahadirov, et.al., IOP Conf. Ser.: Mater. Sci. Eng. 1030, 012160 (2021). DOI 10.1088/1757-899X/1030/1/012160 [CrossRef] [Google Scholar]
  14. Y. Xia, et.al., A new enriched method for extended finite element modeling of fluid flow in fractured reservoirs, Comput. Geotech. (2022) [Google Scholar]
  15. S. Bandara, K. Soga, Comp. Geotech. 63(1) 199-214 (2015). DOI: 10.1016/j.compgeo.2014.12.007 [CrossRef] [Google Scholar]
  16. Y. Xiao, et.al., Application of normalized SPH method to inviscid fluid flows with large deformation of free surface Comput. Fluids (2022) [Google Scholar]
  17. H. Wang, et.al., Numerical modeling and analysis of particle-fluid flow and wall erosion in centrifugal slurry pumps under different solid concentrations Powder Technol. (2022) [Google Scholar]
  18. B. Shi, et.al., A novel experimental facility for measuring internal flow of Solid-liquid two-phase flow in a centrifugal pump by PIV Int. J. Multiph. Flow (2017) [Google Scholar]
  19. G. Peng, et.al., Solid-liquid two-phase flow and wear analysis in a large-scale centrifugal slurry pump Eng. Fail. An. (2020) [Google Scholar]
  20. R. Tarodiya, A. Levy, Surface erosion due to particle-surface interactions - A review Powder Technol. (2021) [Google Scholar]
  21. E. Onem, Quality properties of leather produced in water and supercritical fluid (SCF) media J. CO2 Util. (2018) [Google Scholar]
  22. G. Krishnamoorthy, et.al., Green chemistry approaches to leather tanning process for making chrome-free leather by unnatural amino acids J. Hazard. Mater. (2012) [Google Scholar]
  23. M.A.L. Sayegh, et.al., Impact of physico-chemical properties on falling liquid films flow over flat and corrugated surfaces Int. J. Multiph. Flow (2022) [Google Scholar]
  24. R. Khan, R. Kumar, Z. Ma, Experimental investigations on the performance characteristics of plastic surfaces for developing low flow falling film liquid desiccant regenerators Sol. Energy (2022) [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.