Open Access
| Issue |
E3S Web of Conf.
Volume 458, 2023
International Scientific Conference Energy Management of Municipal Facilities and Environmental Technologies (EMMFT-2023)
|
|
|---|---|---|
| Article Number | 09018 | |
| Number of page(s) | 8 | |
| Section | IT and Mathematical Modeling in Energy Systems | |
| DOI | https://doi.org/10.1051/e3sconf/202345809018 | |
| Published online | 07 December 2023 | |
- G Martinov and L. Martinova, Russian Engineering Research 39, 12, 1080–1083. (2019) doi: 10.3103/S1068798X19120153 [CrossRef] [Google Scholar]
- P. A.Nikishechkin, N. Y.Chervonnova and A. N. Nikich, IOP Conference Series: Materials Science and Engineering 709, 4, 044065 (2020). doi:10.1088/1757-899X/709/4/044065 [CrossRef] [Google Scholar]
- L. I.Martinova, R. L. Pushkov and N. N. Fokin, IOP Conference Series: Materials Science and Engineering 709, 4, 044064, (2020) doi:10.1088/1757-899X/709/4/044064 [CrossRef] [Google Scholar]
- G. Martinov and N. Martemianova, “An Approach to the Production of Prototype Printed Circuit Boards on Bench-Type Machine with the CNC System,” 2023 International Russian Smart Industry Conference (SmartIndustryCon), Sochi, Russian Federation, pp. 433-437. (2023) doi: 10.1109/SmartIndustryCon57312.2023.10110810. [Google Scholar]
- P. Nikishechkin, N.Grigoriev and N. Chervonnova. MATEC Web of Conferences 298, 00064 (2019) doi: 10.1051/matecconf/201929800064 [CrossRef] [EDP Sciences] [Google Scholar]
- R.L.Pushkov, A.B. Ljubimov, S.V. Evstafieva. Lecture Notes in Electrical Engineering, 729, 832–841 (2021) doi:10.1007/978-3-030-71119-1_81 [CrossRef] [Google Scholar]
- K. Kumar, et.al., Canned Cycle. In: CNC Programming for Machining. Materials Forming, Machining and Tribology. Springer, Cham. (2020) https://doi.org/10.1007/978-3-030-41279-1_9 [CrossRef] [Google Scholar]
- S. Sokolov, et.al., General-purpose Control System Adaptation for Gear Milling Tasks. In: 2019 International Multi-Conference on Industrial Engineering and Modern Technologies (FarEastCon). Vladivostok: IEEE, pp.1-5. (2019). doi: 10.1109/FarEastCon.2019.8934441 [Google Scholar]
- G. Martinov, et.al., Russian Aeronautics (Iz VUZ), 59(2), 293-296 (2016). https://doi.org/10.3103/S1068799816020239 [CrossRef] [Google Scholar]
- Adel Abbas. Enhanced CNC Machines Capabilities by Adding Circular Patterns Cycle. International Journal of Precision Engineering and Manufacturing. (2012). DOI: 13. 10.1007/s12541-012-0230-0 [Google Scholar]
- R. Othmani, M. Hbaieb, W. Bouzid. Int. J. Adv.Manuf. Technol. 54, 1023–1032. (2011). DOI: 10.1007/s00170-010-3017-4 [CrossRef] [Google Scholar]
- S. Omirou, et.al., Int. J. Adv. Manuf. Technol. 60, 201–209 (2012) doi: 10.1007/s00170-011-3586-x (2012) [CrossRef] [Google Scholar]
- M.N. Islam, N.H. Rafai, C. Phaopahon. Effect of Canned Cycles on Drilled Hole Quality. In: Ao, SI., Gelman, L. (eds) Electronic Engineering and Computing Technology. Lecture Notes in Electrical Engineering, vol 60. Springer, Dordrecht. (2010) https://doi.org/10.1007/978-90-481-8776-8_53. [Google Scholar]
- M. Ben Meftah, et.al., CycleTime and Hole Quality in Drilling Canned Cycle. In book: Advances in Mechanical Engineering and Mechanics (2019) DOI: doi: 10.1007/978-3-030-19781-0_11 [Google Scholar]
- S. Sokolov,et.al., General-purpose Control System Adaptation for Gear Milling Tasks. In: 2019 International Multi-Conference on Industrial Engineering and Modern Technologies (FarEastCon). Vladivostok: IEEE, pp.1-5 (2019). doi: 10.1109/FarEastCon.2019.8934441 [Google Scholar]
- K. Kumar, C. Ranjan, J. Davim. Do Loop Cycle. In: CNC Programming for Machining. Materials Forming, Machining and Tribology. Springer, Cham. (2020). https://doi.org/10.1007/978-3-030-41279-1_10 [CrossRef] [Google Scholar]
- M.N. Islam, B. Boswell, Y.R. Ginting, Int. J. Chem. Mol. Nucl. Mater. Metall.Eng. 10(7), 857 (2016) [Google Scholar]
- L.I. Martinova, N.N.Fokin, MATEC Web Conf. 224, 1-5 (2018). https://doi.org/10.1051/matecconf/201822401101. [CrossRef] [EDP Sciences] [Google Scholar]
- G. M. Martinov, L.I. Martinova and N.N. Fokin, MATEC Web of Conferences 346(4), 03098 (2021) DOI: 10.1051/matecconf/202134603098 [CrossRef] [EDP Sciences] [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.