EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 458 (2023) E3S Web of Conf., 458 (2023) 10006 References
Open Access
Issue
E3S Web of Conf.
Volume 458, 2023
International Scientific Conference Energy Management of Municipal Facilities and Environmental Technologies (EMMFT-2023)
Article Number 10006
Number of page(s) 10
Section Energy Engineering and Mechanical Engineering
DOI https://doi.org/10.1051/e3sconf/202345810006
Published online 07 December 2023
  1. F.R. Norhudjaev, et.al., Use of metal layered compositions in the production of tillage tools in agriculture, Materials of the republican scientific and scientific-technical conference on the topic “Efficient technologies of production, storage, and processing of agricultural products and their innovative solutions” (Fergana, 2017) [Google Scholar]
  2. E. N. Zubkova, Svarochnoe proizvodstvo / Welding production 7, 33-35 (2002) [Google Scholar]
  3. F.R. Norhudjaev, et.al., Technology for the production of metal layered compositions based on molybdenum and its alloys for tool production. Engineering and technology of mechanical engineering. Materials VII international conference. Russia, Omsk, 21-23 may, pp. 54-59 (2018) [Google Scholar]
  4. F.R., Norkudjayev, et.al., International Journal of Mechatronics and Applied Mechanics 2021(9), 137-145 (2021) [Google Scholar]
  5. F.R. Norhudjaev, et.al., Creation of technology for obtaining model metal layer compositions by gas casting method, “A collection of materials of the ministerial-level scientific and technical conference on “Innovacion development problems: production, education, science”. April 26’.- Andijan Institute of Mechanical Engineering (2017) [Google Scholar]
  6. F.R. Norhudjaev, et.al., Development of the technological basis for the production of metal compositions, Engineering and technology of mechanical engineering. Materials VII international conference. Russia, OMSK, April 20-21, pp.106-108 (2017) [Google Scholar]
  7. M. Khudjaev, E3S Web of Conf. 390, 04033 (2023). https://doi.org/10.1051/e3sconf/2023390040334 [CrossRef] [EDP Sciences] [Google Scholar]
  8. V.M. Grigorev, Casting by burn-out models. (Habarovsk: Izd-vo HGTU, 2002) [Google Scholar]
  9. Yu.S.Tilavov, et.al., Research of Technological Modes of Production of Small Diameter Rods from Niobium. In: Cioboată, D.D. (eds) International Conference on Reliable Systems Engineering (ICoRSE) - 2022. ICoRSE 2022. Lecture Notes in Networks and Systems, vol 534. Springer, Cham (2022). https://doi.org/10.1007/978-3-031-15944-2_13 [Google Scholar]
  10. B.S. Bektemirov, et.al., Euro-Asia Conf. 5(1), 260–262 (2021) [Google Scholar]
  11. Z.L. Alimbabaeva, B. Sh. Bektemirov, Composite materials production technology for machining materials. Lithium and metallurgy 2020: sbornik nauchnih rabot III Mejdunarodnoy nauchno-prakticheskoy internet conference students and graduate students, November 18-19, 2020 /sost. AP Bejok.–Minsk: BNTU (2021) [Google Scholar]
  12. F.R. Norkhudjayev, et.al., Int. J. of Mech. and Applied Mechanics 12, 163-169 (2022) [Google Scholar]
  13. R.F. Norhujaeva, Hardening of cast bimetallic dies obtained by casting according to gasified models, International scientific and technical conference 2022, Tashkent, on the topic of resource and energy saving innovation technologies in the field of foundry production (2022) [Google Scholar]
  14. R.F. Norhujaeva, A.A. Muhamedov, Development of technology for obtaining metal layered compositions for metal processing tools, Proceedings of the Republican scientific and scientific-technical conference on “Integration of science, education and production in mechanical engineering: trends, problems and solutions” May 19, Tashkent. - p. 139-141 (2022) [Google Scholar]
  15. O.A. Khasanov, et.al., Three-axis milling machine with digital program control, Proceedings of the Republican scientific and scientific-technical conference on “Integration of science, education and production in mechanical engineering: trends, problems and solutions” May 19, Tashkent. pp. 57-59 (2022) [Google Scholar]
  16. F.R. Norkhudjayev, et.al., Int. J. of Mech. and Applied Mechanics 11, 95-97 (2022) [Google Scholar]
  17. F.R. Norkhudjayev, et.al., Int. J. of Mech. and Applied Mechanics 10, I, 168-174 (2021). doi: http://dx.doi.org/10.17683/ijomam/issue10/v1.21 [Google Scholar]
  18. F.R. Norkudjayev, et.al., International Journal of Recent Technology and Engineering (IJRTE) 8 (2), 10, 361-366 (2019) [Google Scholar]
  19. Sh.A. Karimov, et.al., Int. J. of Mech. and Applied Mechanics 10, I, 204- 208 (2021). https://doi.org/10.17683/ijomam/issue10/v1.26 [Google Scholar]
  20. F.R. Norkhudjayev, et.al., Journal NX- A Multidisciplinary Peer Reviewed Journal 7, 11, 75-77 (2021) [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.