Open Access
| Issue |
E3S Web Conf.
Volume 459, 2023
XXXIX Siberian Thermophysical Seminar (STS-39)
|
|
|---|---|---|
| Article Number | 07005 | |
| Number of page(s) | 5 | |
| Section | Thermophysical Problems of Energetics, Energy Efficiency and Energy Saving | |
| DOI | https://doi.org/10.1051/e3sconf/202345907005 | |
| Published online | 04 December 2023 | |
- S.V. Alekseenko, V.Y. Borodulin, N.A. Gnatus et al. Problems and outlooks for petrothermal power engineering (review) // Thermophys. Aeromech. 23, 1 (2016) [CrossRef] [Google Scholar]
- R.B. Jackson et al. The depths of hydraulic fracturing and accompanying water use across the United States // Env. Sci. & Tech. 49 (15), 8969 (2015) [CrossRef] [PubMed] [Google Scholar]
- Y. Feng, J. F. Jones, K.E. Gray, A Review on fracture-initiation and propagation pressures for lost circulation and wellbore strengthening// SPE Drill. &Compì. 31 (2), 134 (2016) [CrossRef] [Google Scholar]
- S. Cherny et al. Prediction of fracture initiation zones on the surface of three-dimensional structure using the surface curvature // Eng. Fract. Mech. 172, 96 (2017) [Google Scholar]
- S.G. Cherny, et al. Methods for modeling fracture initiation and propagation (SB RAS, Novosibirsk, 2016) [in Russian] [Google Scholar]
- S. Cherny et al. Simulating fully 3D non-planar evolution of hydraulic fractures // Int. J. Frac. 201 (2), 181 (2016) [CrossRef] [Google Scholar]
- D.S. Kuranakov et al. Modification of the boundary element method for computation of three dimensional fields of strainstress state of cavities with cracks // Eng. Fract. Mech. 153, 302 (2016) [CrossRef] [Google Scholar]
- S. Cherny et al. 3D model of transversal fracture propagation from a cavity caused by Herschel- Bulkley fluid injection // Int. J. Frac. 212 (1), 15 (2018) [CrossRef] [Google Scholar]
- V. N. Lapin, A. A. Fomina On the global implicit criterion of a fracture propagation under mixed load // J. Appl. Ind. Math. 13, 4 (2019) [Google Scholar]
- A. Briner et al. Impact of perforation tunnel orientation and length in horizontal wellbores on fracture initiation pressure in maximum tensile stress criterion model for tight gas fields in the Sultanate of Oman, in Proc. SPE Middle East Oil & Gas Show and Conference, Manama, Bahrain, SPE-172663-MS (2015) [Google Scholar]
- A. Briner et al. Impact of wellbore orientation on fracture initiation pressure in maximum tensile stress criterion model for tight gas field in the Sultanate of Oman, in Proc. SPE North Africa Technical Conference and Exhibition, Cairo, Egypt, SPE-175725-MS (2015) [Google Scholar]
- O.P. Alekseenko et al. 3D modeling of fracture initiation from perforated noncemented wellbore // SPE J. 18 (3), 589 (2013) [CrossRef] [Google Scholar]
- A.A. Savitski, E. Detournay Propagation of a penny-shaped fluid-driven fracture in an impermeable rock: asymptotic solutions // Int. J. Solids & Struct. 39 (26), 6311 (2002) [CrossRef] [Google Scholar]
- M.J. Economides, K.G. Nolte, Reservoir Stimulation (3rd Ed.) (Wiley, 2000) [Google Scholar]
- H. Zia, B. Lecampion, PyFrac: A planar 3D hydraulic fracture simulator // Comp. Phys. Comm. 255 (2020) [Google Scholar]
- R.J. Clifton, J.J. Wang. Modeling of poroelastic efects in hydraulic fracturing // SPE, SPE21871- MS (1991) [Google Scholar]
- R.D. Barree, A practical numerical simulator for threedimensional fracture propagation in heterogeneous media // SPE Res. Sim. Symp., San Francisco, California (1983) [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.