Open Access
| Issue |
E3S Web Conf.
Volume 460, 2023
International Scientific Conference on Biotechnology and Food Technology (BFT-2023)
|
|
|---|---|---|
| Article Number | 09004 | |
| Number of page(s) | 7 | |
| Section | Agroecology and Sustainable Food Systems | |
| DOI | https://doi.org/10.1051/e3sconf/202346009004 | |
| Published online | 11 December 2023 | |
- V.A. Demin, High-tech technologies in mechanical engineering 8 (98), 3–7 (2019) [Google Scholar]
- V.G. Burdukovsky, Technology of sheet stamping: textbook (Yekaterinburg: Ural Publishing House. un-ta, 2019) [Google Scholar]
- D.L. Pankratov, S.G. Vladimirova, Design of technological processes of cold volumetric stamping: textbook (Naberezhnye Chelny Institute of KFU. 2017) [Google Scholar]
- Forging and stamping: A handbook in 4 t/Ed. Council: E.I. Semenov (pred.) and others - M.: Mechanical Engineering, 1987 - vol. 3. Cold volumetric stamping/ Edited by G.A. Navrodsky. 1987. 384 p. [Google Scholar]
- V.A. Krokha, Hardening of metals during cold plastic deformation. Handbook (M., Mashinostroenie, 1980) [Google Scholar]
- K.I. Bilibin, V.P. Grigoriev, Cold stamping: textbook. manual on the course “Technology of electronic means” (M., Publishing House of Bauman Moscow State Technical University, 2010) [Google Scholar]
- S.N. Kunkin, A.V. Mamutov, V.S. Mamutov, Technological methods of sheet stamping: textbook. (Manual, SPb, - 2018) [Google Scholar]
- L.A. Shofman, Theory and calculations of sheet stamping processes. (M., Mashinostroenie, 1974) [Google Scholar]
- V.A. Demin, A.A. Ryzhkova, Izvestiya Tula State University. Technical sciences 10, 418–423 (2020) [Google Scholar]
- E.D. Gryazeva, Izvestiya TulGU. Technical sciences 3, 126–128 (2022) [Google Scholar]
- Ki-Young Kim, Metals 10 (11), 3–19 (2020) [Google Scholar]
- M. Bambach, Incremental Sheet Forming 344, 511–518 (2007) [Google Scholar]
- Lei Mu, Zhe Jia, Ziwei Ma, etc, International Journal of Plasticity 129, 102–106 (2020) [Google Scholar]
- S. Vijayananth, V. Jayaseelan, G. Shivasubbramanian, Applied Mechanics andMaterials 766-767, 416–421 (2015) [CrossRef] [Google Scholar]
- B. Gu, X. Han, L. Hua, Thin-Walled Structures 162, 107567 (2021) [CrossRef] [Google Scholar]
- Hao H. Nguyen, Trung N. Nguyen, Hoa C. Vu., Forming Limit Diagram Prediction of AA6061-T6 Sheet Using a Microscopic Void Growth Mode. Lecture Notes in ElectricalEngineering - AETA 2017 - Recent Advances in Electrical Engineering and RelatedSciences: Theory and Application. South China University of Technology. pp. 1026–1036 (2017) [Google Scholar]
- S.V. Lukinskikh, Computer modeling and engineering analysis in design and technological preparation of production: textbook. (M-vo nauki i vysh. obr. RF.- Yekaterinburg: Ural Publishing House. un-ta, - 2020) [Google Scholar]
- A.M. Dmitriev, N. V. Korobova, N. S. Tolmachev, Bulletin of the Moscow State Technical University. Stankin 2 (29), 44–49 (2014) [Google Scholar]
- V.N. Ivanov, K.M. Ivanov, E.A. Prigorovsky, D.V. Usmanov, Instrument 23, 94–102 (2006) [Google Scholar]
- K.A. Galitsina, News of TulSU. Technical sciences 4, 352–353 (2023) [Google Scholar]
- E.I. Yatsun, A.S. Kobzev, Investigation of the rigidity of the spindle assembly by means of solid-state modelling. “Prospects for the development of processing technologies and equipment in mechanical engineering”. Collection of scientific papers Voronezh State Technical University, pp. 441–446 (2023) [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.